Environmental Design Equipment For Environmental Management Available In Newfoundland
-
PremiumManufactured by Aralabbased in PORTUGAL
Environmental Rooms, specifically designed for the study of algae and marine organisms, offer accurate control of temperature, light, and other essential environmental conditions. These chambers come equipped with tanks, oxygenation accessories, and can be outfitted with state-of-the-art LED lighting to support comprehensive research on aquatic ...
-
PremiumManufactured by Monarch Instrumentbased in USA
The ACT-1B Panel Tachometer is compatible with all Monarch speed sensors with tinned wire "-W" connections. It can be factory configured to meet your specifications or user-configured onsite with the optional USB Programming Cable. The USB Programming Cable and free downloadable PM Remote Software also allow real-time display and recording of data on a local PC. Optional NIST Traceable ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Vaccine Working Temperature:2~8?. Freezer Working Temperature:≤-10?. Humanized design. Multiple alarm functions. Solar direct drive, environmental protection. Wide climate design. 30 days temperature ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the ...
-
PremiumManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
New product launched in 2022. - Advanced Technics Design - Environmental Care - High Stability & Reliability - Sensitive Detection - Adjustable Bandwidth - Multi-application - Efficient and Convenient ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed a professional version of Motion Reference Units (MRU-PD) to meet the requirements from marine and hydrographic applications. The MRU-PD is an enhanced, high-performance strapdown Motion Sensor - affordable solution for survey, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Single and Dual Antenna GPS-Aided Inertia I Navigation System — INS is a new generation of fully-integrated, combined GPS, GLONASS, GALILEO, QZSS, BEIDOU and L-Band navigation and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Attitude and Heading Reference Systems, AHRS-II is the next generation of enhanced, high-performance strapdown systems that determines absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The PMS Environmental Control Cabinet for the Ultra DI 20 and Chem 20 particle sensors is designed to produce the highest-precision particle data at 20 nm, for the cleanest ultrapure water and process chemical systems in the world. The special environmental control design enables temperature control to the required level of 22 - 28 °C + 1 °C/hour. For measuring particles as small as 20 ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Weapon Orientation Module - WOM provides a level of performance previously unseen in the world of miniature 3DOF orientation sensors. WOM employs the use of three axes each of gyroscopes, accelerometers, and magnetometers to track both slow and fast movements of weapons in real-time. With fully embedded capabilities to calibrate against soft- and hard-iron interference present ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Our oxygen concentrators (also called oxygen generator) are available in the range of 0,5 l/m to 158 l/m and can be purchased with or without compressor. With these oxygen generators oxygen can be produced from ambient air. If compressed air is available the oxygen concentrator alone is ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
K33 ELG 10,000ppm CO2 + RH/T Data Logging Sensor. The K33 ELG (environmental logger) is designed to log up to 10,000ppm (1%) carbon dioxide, temperature, and % relative humidity in ambient air. Because of its ultra-low power requirements, it can “wake up”, take a sample, store the data in memory, and go back to sleep. Using battery power only, the sensor can be placed in the field for ...
-
based in USA
Our environmentally friendly sorbents are designed to meet or exceed the mercury mitigation requirements of our clients while providing the best possible operating economics. Our sorbent line offers superior performance and the lowest possible feed rates when compared to other solutions on the ...
-
Manufactured by SPP Pumps Limitedbased in UNITED KINGDOM
SPP Pumps horizontal or vertical split case pumps have been specifically engineered to meet the needs and requirements of the oil, gas and process industries. Tough and robust products are required which have proven long term reliability and benefits, enabling them to perform in often arduous operational and environmental conditions - where dependability is of paramount ...
-
Manufactured by FinnSonic Oybased in FINLAND
FinnSonic Optisol is an optimal solution for cleaning large quantities of small parts with inner holes and channels. Finnsonic Optisol solvent cleaning machines are designed for environmentally-friendly and efficient cleaning and drying of basket goods, typically turned or milled bulk, contaminated by oil and swarf. All cleaning stages are performed under full vacuum to ensure that no solvents ...
-
Manufactured by CST Industries Incbased in USA
Expansive engineering capability and unmatched design experience make BulkTec® storage tank systems the best option to contain dry bulk materials. BulkTec systems successfully store all types of dry bulk materials ...
-
by Pöyry PLCbased in FINLAND
Pöyry's large variety of experts, e.g. economists, financial advisers, commercial experts, energy specialists and experts for various technologies, provide an exceptionally good base for project development ...
-
Manufactured by Airtech Incorporatedbased in USA
The 3BA1002 series is a standard brushless DC motor for variable speed ...
-
Manufactured by Weber Kunststofftechnik GmbHbased in GERMANY
Thanks to 50 years of experience in the field of surface technology and by using thermoplastics and composite materials, our tanks stand for quality and durability. Of course we also deal with energy and environmental matters when designing our components. Thus we meet highest official requirements. The medium and the temperature determine the tank material and influence the statics. The design ...
-
Manufactured by Process Engineering Srlbased in ITALY
Columns and Plants for Mass Transfer Operation such as Absorption, Desorption, Stripping and Similar. The use of the helier-Structured Packing - hSP - permits the realization of Structured Columns for Mass Transfer. characterized by:High Transfer Efficiency. Low Pressure Drops. Reduced Fouling. Reduced Column Dimension. The lowest Column Operating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you