Environmental Liability Equipment For Environmental Management Available In Kazakhstan
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Complete Turnkey Systems, custom designed and manufactured by Shred-Tech, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The High Density Extruders are used to extract liquids from many types of industrial refuse byproducts, or to remove liquids from many commonly used packaged products and beverages. Tested and proven time and time again, the High Density Extruder is the best performing, most efficient and most reliable ram press available ...
-
Manufactured by Champagne Edition Inc.based in CANADA
Permanent and portable and offer the durability required to withstand constant pedestrian and vehicular traffic. Reflective yellow tape on edges to promote visibility and safety. Flexible and will not crack or separate from frost heaves like concrete. All season, all weather durability including snow plowing and de-icing. Safe, anti-slip surface can reduce liability claims. Unique over/under lap ...
-
Manufactured by Champagne Edition Inc.based in CANADA
Permanent and portable and offer the durability required to withstand constant pedestrian and vehicular traffic. Reflective yellow tape on edges to promote visibility and safety. Flexible and will not crack or separate from frost heaves like concrete. All season, all weather durability including snow plowing and de-icing. Safe, anti-slip surface can reduce liability claims. Unique over/under lap ...
-
Manufactured by Smiths Detection Inc.based in USA
The HI-SCAN 10080 XCT is a next generation high-speed, explosives detection system (EDS) for hold baggage and air cargo. It features a dual-view dual-energy X-ray line scanner with full 3D volumetric computed tomography (CT) imaging and reconstruction. The HI-SCAN 10080 XCT has a belt speed of 0.5m/sec (98.5ft/min) and a large 107 x 81 cm (42.1 x 31.9in) rectangular tunnel. It is designed to be ...
-
Manufactured by Organomation Manufacturing, Inc.based in USA
The 48 position MULTIVAP nitrogen evaporator (Catalog# 11848) is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. ...
-
Manufactured by Hydro-Carbon Filtration & Separationbased in NETHERLANDS
Storage tanks for flammable liquids and hydrocarbons inevitably take in water due to venting and leakages of floating roof tank seals or through en-trained water in the product itself. Over time this will result in a layer of water at the storage tank bottom. Between the two fluids a so called “rag layer” tends to form consisting of an oil-water mixture, creating an environment for ...
-
Manufactured by Minergy Corporation Limitedbased in UNITED KINGDOM
Minergy’s LWA production facility was constructed as a means to beneficially reuse coal combustion fly ash from a power plant located in Oak Creek, Wis. LWA was commercially produced between 1994 and 2000, at which time the properties of the fly ash changed as a result of a new source of coal, thus allowing the fly ash to be marketed directly into the concrete industry without additional ...
-
Manufactured by Minergy Corporation Limitedbased in UNITED KINGDOM
Minergy Corp. Develops Innovative Technology: Wastewater treatment systems, both industrial and municipal, produce large quantities of sludge that require disposal. Unfortunately, sludge disposal poses significant environmental liabilities, logistical problems and economic ...
-
Manufactured by Industrial Waste Water Services, LLCbased in USA
Oil/water separators are 'in-line' devices used to remove oils and greases (and sometimes solids) from industrial waste streams. O/WSs operate by employing various physical or chemical separation methods, including gravity separation, filters, coagulation/flocculation, and flotation. However, the use of any separation process depends on the properties of the oil in the oil/water ...
-
based in CANADA
Firebag Technical Solutions provides a full range of Project Engineering Services for the following disciplines: Civil engineering Instrumentation and control Mechanical engineering Process Engineering Structural Engineering Piping design CAD Drafting Modularization/Flexibility Retrofitting/Upgrading Project Safety Firebag Technical Solutions has experience conducting many ...
-
Manufactured by Champagne Edition Inc.based in CANADA
Rubber Flooring tiles by Eco-Flex are made from Recycled Rubber Material. Easy handling. Simple and Quick Installation. Provides instant access once installed, no need to wait for the surface to dry or cure. Flexible – will not crack or separate from frost heaves like concrete. Attractive decorative pattern. Attractive color options, without the steep price of stamped concrete. Safe, anti-slip ...
-
Manufactured by Instrumented Sensor Technology, Inc. (IST)based in USA
ShockTimer-Plus 3Dv2, (STP3Dv2) is a new, low cost Shock Recorder for transportation monitoring. The device can be attached to your shipment or vehicle and will record the exact time it was abused in transport and even tell the level of shock it was subjected ...
-
Manufactured by Champagne Edition Inc.based in CANADA
Rubber Flooring tiles by Eco-Flex are made from Recycled Rubber Material. Easy handling. Simple and Quick Installation. Provides instant access, no need to wait for surface to dry or cure. Flexible – will not crack or separate from frost heaves like concrete. Attractive decorative pattern. Attractive color options, without the steep price of stamped concrete. Safe, anti-slip surface can reduce ...
-
Manufactured by JDI, Inc. / Washbay Solutionsbased in USA
We have developed a revolutionary heavy-duty wash and treatment system by integrating our demucking system with our clarifier oil water separator system. Using low flow pumps, moderate pressure and specialized nozzles, our robustly- designed demucker systems can quickly clean large trucks, tracked vehicles or any heavy equipment caked with mud, clay, ice, or muck – using only 20 gpm of ...
-
Manufactured by SmartSkim by Sentry Equipmentbased in USA
The CoolantLoop Coolant Recycling Systems are based on decades-long successful fluid treatment practices, using the award-winning, multipatented SmartSkim® Systems approach to solving ...
-
Manufactured by Deep Greenbased in BELGIUM
Confronted to classic systems of thermal desorption, thermopile is consuming less energy, producing less emissions and is completely free of noisy, dusty and polluting transport systems for ...
-
Manufactured by SonoAsh LLCbased in CANADA
The process assumes a standard impoundment where the ash is extracted wet in a slurry for processing through SonoAsh ...
-
Manufactured by Ecozymebased in SOUTH AFRICA
Heavy duty degreaser and cleaner with superior oil, petrol and hydrocarbon remediating properties which eliminates waste disposal costs and reduces health and safety ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you