Air Modeling (Environmental Modeling) Equipment In Canada
-
Manufactured by Abatement Technologies, Inc.based in USA
Powerful airflow, rated at 1,300 cfm (L) & 2,000 cfm (H). Two pre-filter stages and a True 99.97% HEPA filter. Equipped with a differential pressure gauge and an audio “change filter” alarm. Superior mobility and durable 20 gauge galvanized steel cabinet. ETL-certified to conform to stringent UL and CSA safety ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Many laboratory applications, such as air emission applications, require calibration gas. To meet these requirements, Peak Scientific have produced the CG15L which generates zero air by removing carbon dioxide and moisture from the air for applications requiring a higher performance than zero air ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran® Model 3400-AIR Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Tekran® Series 3400 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1102 provides dry air to the Model 1130 Pump Module zero air generating system. The dryer unit contains two columns that alternate between absorbing water when cool and desorbing water during a heated regeneration step. Ambient air is pulled through the cool column by the 1130 Pump Module to ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Alpha-Modular-System for large blowers for process air applications. 104 model variants with low pulsation, reduced piping noise, integrated sound reduction measures and fully integrated oil system in the stage. 2-/3-lobe blower stage with direct or belt drive in a modular ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard ...
-
PremiumManufactured by Sauereisen Inc.based in USA
A two component epoxy lining system that is used to protect steel and other substrates from chemical attack and abrasion. ConoGlaze AR 207 is a two component epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack and abrasion. ConoGiaze AR 207 is specifically formulated for maximum resistance to abrasion, heat and chemical attack typically found in ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
light flux in a certain range will be collected and projected onto the photoelectric converter from which the electrical signal is related to the mass concentration of the measured particles. The content of particulate matter in the ambient air will be calculated from the measured scattered light intensity. The SCI-2021 monitor is an ideal ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete - Epoxy NovolaK 218 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy NovolaK lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibits outstanding flexural and tensile strengths. FibreCrete may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze HC 222 is a two-component, NovolaK epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack. ConoGlaze HC 222 is specifically formulated for maximum resistance to heat and chemical attack typically found in flue-gas and refining applications. When used as a topcoat for ConoCrete or FibreCrete systems, ConoGlaze improves appearance and ease of ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze - Epoxy NovolaK 228 is a chemically resistant, 100% solids, epoxy NovolaK coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated as a sealer to resist strong ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during exposure. This virtually ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
precise air quality and meteorological data in real-time. Our sensor products have been used in fenceline/community monitoring, pollution source screening, wildfire/smoke monitoring, and smart city ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze - Chemical and Food Grade 202 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated to resist food acids, fats and ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
precise air quality and meteorological data in real-time. Our sensor products have been used in fenceline/community monitoring, pollution source screening, wildfire/smoke monitoring, and smart city ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
-averaged air velocity measurements. The accuracy of the OFS has been proven both in NIST's wind tunnel and in numerous real-world installations. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you