Air Modeling (Environmental Modeling) Equipment In Texas
-
based in USA
ACS Engineering Group’s air environmental consulting team uses air dispersion modeling to predict off-property concentrations resulting from emissions of air pollution. Equations and algorithms are incorporated into various computer models to calculate atmospheric concentrations of pollutants at specific ...
-
Manufactured by Air Rover Inc.based in USA
Only the APS2000 converts extra-large indoor spaces into ‘safe zones’ by cycling 10,000 cubic feet of air TWELVE times every hour. People in high-risk areas like subway terminals and hotel lobbies can now experience the air quality of a hospital’s airborne infection isolation room. With its customized high-static fan, the ...
-
based in USA
different models of SmokeWatch U5015 explosion-proof smoke detector available for purchase. FEATURES​ 1) Rugged aluminum design for environmental extremes 2) Designed to meet UL268A (but not certified) 3) Designed to meet ingress protection requirements for NEMA 250 Type 4X 4) Pitot tubes allow for air velocity ranges of 300 to 4,000 ft/min ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Alpha-Modular-System for large blowers for process air applications. 104 model variants with low pulsation, reduced piping noise, integrated sound reduction measures and fully integrated oil system in the stage. 2-/3-lobe blower stage with direct or belt drive in a modular ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Model 94321 Air Dryer absorbs moisture from the air that is drawn into a storage tank during the unloading of product or by "thermal breathing" conditions. Desiccant of high absorptive capacity is used as the drying agent. The hard ball shaped form of the desiccant minimizes the pressure drop, permitting more ...
-
Manufactured by Dragon Products, Ltd - Modern Group LTDbased in USA
This unique unit allows a single operator the ability to load and haul two 16’- 22’ containers. Overall length: 48’ – 6” | Rail Length 47’ | Rail Height 62”. G.V.W.R. Rating: 80,000 lb. Main Winch: (1) Tulsa 60,000 lb. Capacity Planetary 7/8” cable EXIWRC 6 x 36. Transfer Winch: (1) Tulsa 20,000 lb. Line pull 5/8” cable EXIWRC 6 x 36. G.V.W.R. ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
USA - Europe 72-hour delivery 30-day 'No Risk Trial' Total support for your mixing need 50+ years experience in mixer technology Industry standard IEC, off-theshelf motors from 0.18 to 1.5kw Features and Benefits Motors: Direct ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6020 SO2 Analyzer provides an accurate and convenient means of measuring low levels of Sulfur Dioxide in ambient air. The Model 6020 measures sulfur dioxide by detecting the fluorescence of SO2 when exposed to ultraviolet (UV) radiation at wavelengths near 214 nm. The SO2 molecule fluoresces (reradiates) at longer ...
-
based in USA
Argent has extensive experience assisting facilities in complying with the Clean Air Act. We aid clients in all aspects of air permitting including Title V permits, state air construction and operating permits, applicability determinations, emission inventories, air dispersion modeling, compliance plans, emission ...
-
Manufactured by Smart Family of Cooling Productsbased in USA
Our Smartech America SSCD model industrial air cooled screw chiller is built to last. This industrial chiller is used in a variety of process cooling applications. All of our SSCD chillers are built STANDARD with COATED plate fin condensers and stainless steel hardware in order to survive in the harshest chemical and coastal environments. ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 2500 permeation oven is a simple, effective tool for generating precise gas concentrations for calibrating air quality analyzers, source monitors and other measurement equipment. When combined with our gas dilution calibrators, it creates a powerful and intelligent calibration system. The Model 2500 permeation oven chamber is ...
-
Manufactured by Amotbased in USA
AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion engine. Normal application of this model is for shutting down a gas engine in the event of a dangerous condition such as high jacket water temperature, low lubrication oil pressure, excessive vibration, high gas discharge temperature ...
-
Manufactured by Nippon Instruments North Americabased in USA
The NIC Model WA-5 mercury analyzer is specially designed for measurement of Mercury in air and gaseous matrices (eg. hydrocarbon gases like Natural Gas, Shale Gas, LPG/LNG and more) in compliance with the widely established and accepted technique of Gold-Amalgamation and detection by Atomic Spectroscopy ‒ with the choice of either ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 2020 is a portable source for clean, dry air designed to meet a wide range of requirements for the environmental industry. From supplying air for calibration systems to purge air for permeation ovens, the small package size and weight make the Model 2020 the preferred choice for field and audit ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 2020-EXP is a portable source for clean, dry air designed to meet a wide range of requirements for the environmental industry including trace level applications. From supplying zero air for calibration systems to purge air for permeation ovens, the small package size and weight make the Model 2020-EXP ...
-
Manufactured by QED Environmental Systemsbased in USA
The innovative design of E-Z Stacker Air Strippers delivers many advantages to environmental consultants, remediation contractors, and end-users. E-Z Stacker models are sized and priced to be the most economical choice for many low to moderate flow cleanup applications (up to 40 GPM). Low capital expense and low O & M requirements ...
-
Manufactured by QED Environmental Systemsbased in USA
QED makes VOC removal even easier with the EZR Tray Air Stripper. The EZR Tray is a sliding tray, stainless steel air stripper ideal for removing volatile organic compounds (VOCs) and dissolved gases from contaminated groundwater and waste streams. The simplified, snap-together tray design is lighter and more cost effective than other ...
-
Manufactured by QED Environmental Systemsbased in USA
EZ-Tray® Air Strippers are sliding tray, stainless steel air strippers used to remove volatile organic compounds (VOC) from groundwater. As Groundwater enters through the top of the air strippers, millions of air bubbles are forced by the blower pressure up through the perforated trays, vigorously aerating the water to a ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak™ Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak™ has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and ...
-
Manufactured by Sentry Air Systems, Inc.based in USA
The Model 300 Table Sentry is a compact fume extractor that is built specifically for stationary, benchtop operations where airborne fumes need to be captured and filtered at the work surface level. This unit is available with a 1” or 4” source capture slot at the base of the unit and comes equipped with a variable speed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you