flow modeling Equipment available in Virginia

Available in Virginia| Near Virginia
360 Results found

We couldn't find any flow modeling equipment in Virginia

Here is a list of results available in Virginia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Environmental Management ×

  • Subcategory: Environmental Modeling ×

  • Keyword: flow modeling ×

  • Available in: USA ×

  • Available in: Virginia ×

Electromagnetic Flowmeters

by ABB Measurement Products     based in Zurich, SWITZERLAND

Electromagnetic flowmeters from ABB are in their element whenever the flowrate of conductive liquids, slurries or sludges is to be measured. A comprehensive range of product lines and models cover just about every application. The modular designs offer the industry’s widest range of liners, electrodes, and sizes to meet the needs of the most ...

InnovaMass - Model 240V - In-line Volumetric Vortex Meter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra's Model 240V  In-line Volumetric Vortex Meter provides a direct reading of volumetric flow for liquids, steam or constant density gases. Product accuracy is ± 1% of rate for liquids and 0.7% of rate for gases and steam over a 30:1 range.  The Model 220 is hazardous area approved for FM, CSA, ATEX and CE and available in ...

FloBox - Model 951/954 - Digitize Up to Four Analog Mass Flow Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra Instruments' FloBox Models 951 and 954 include a compact, single channel device for operation of one mass flow meter or controller and a deluxe, multi-channel device for operation of up to four devices. Designed specifically for use with the Sierra Model 830 flow meters and Model 840 flow controllers, both of these powerful digital systems ...

Flow Splitter Model 3708

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The Flow Splitter directs an aerosol sample to as many as four destinations at once. This accessory is especially useful when performing instrument comparison or calibration experiments. Smooth flow transitions provide equal flow distribution. Stainless-steel construction and an electropolished interior prevent the aerosol from being contaminated. ...

FlowTrak - In-line Flow Conditioning Plates

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

FlowTrak is an economical solution to problems associated with monitoring flow installations where long, straight runs of piping are not available. Extensive real-world testing and CFD (computational fluid dynamics) modeling has determined: Optimal spacing between each conditioning plate for each pipe size. Perforation diameter. Spacing of each ...

Low-Flow Thermodenuder Model 3065

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The presence of volatile particles and their precursors in particulate exhaust emissions can have great influence over the size measurement when the exhaust cools and dilutes. The Low-Flow Thermodenuder removes precursors and volatile particles from an aerosol sample for subsequent measurement of dry particle size. It is optimized for use with TSI ...

Kytola Instruments - Model ExH-ExK - Multi-Block Variable Area Flow Meter Model

by Kytola Instruments Oy     based in Muurame, FINLAND

Variable area flow meter Model ExK is a high quality acrylic multi-tube flow meter. It is a reliable and easy to read instrument for measuring and monitoring liquid and gas flows. It is available in single-tube and multi-tube version with many options. Model ExK is equipped with flow adjustment valves on the outlet and is also available in ...

Hydro Royal - Model HR 5 RA - Heat Exchanger

by Hydro Royal     based in Bellevue, WASHINGTON (USA)

Heat Exchanger: 100% Titanium Heat Exchanger. Min/Max Flow: 20/70 Gallons. Recommended Flow: 45 Gallons. Compressor: Scroll. Plumbing Size: 2'. Min Amps / Max Breaker: 37/40. Dimensions (Shipping): 31' x 31' x 38' (33' x 31' x 43'). Weight (Shipping): 218 Lbs. (253 lbs.).

Hydro Royal - Model HR 90 RA - Heat Exchanger

by Hydro Royal     based in Bellevue, WASHINGTON (USA)

Heat Exchanger: 100% Titanium Heat Exchanger. Min/Max Flow: 20/70 Gallons. Recommended Flow: 45 Gallons. Compressor: Scroll. Plumbing Size: 2'. Min Amps / Max Breaker: 36 /40. Dimensions (Shipping): 31' x 31' x 34' (33' x 31' x 39'). Weight (Shipping): 210 Lbs. (245 lbs.).

Kytola Instruments - Multi-Tube Variable Area Flow Meter Model VE-x

by Kytola Instruments Oy     based in Muurame, FINLAND

Variable area flow meter Model VE-x is a sturdy industrial flow meter with a heavy-duty impact resistant polymer flow tube. It has a flow adjustment valve on the outlet. It comes in a range of different options and offers a choice of end blocks — aluminum, stainless steel AISI 316 or polyamide. It is a reliable instrument for measuring and ...

Kytola Instruments - Model HV, HK, HT - Variable Area Flow Meter Model HV, HK, HT

by Kytola Instruments Oy     based in Muurame, FINLAND

Variable area flow meters Model HK, HT and HV are industrial flow meters. They have an injection molded impact resistant flow tube with threaded or socket type connections. They are a reliable instrument for measuring and monitoring liquid and gas flows. Typical applications are reverse osmosis, water treatment plants, chemical and process ...

Marsh McBirney - Model 2000 - Flo-Mate Flow Meter

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

Marsh McBirney's Model 2000 Flo-Mate is a lightweight, water resistant submersible flow meter designed for open-channel applications. Turbulent/noisy flows are easily metered with two optional data averaging features, Fixed Period Averaging or Constant Mode. Standard outputs include feet/second and meters/second. When the sensor is placed in ...

Singer Valve - Model 106/206-2SC-MV - Electronic Flow Control and Metering System

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The ...

Model 627 - Open Bore Inline Target Flow Switch

by Delta Controls Corporation     based in Shreveport, LOUISIANA (USA)

The Delta Controls Model 627 is a target actuated flow switch and is equipped with a body that fits into and becomes part of the pipeline. It is similar to the Model 626, but is available in a wider range of materials and pressure ratings. The Model 627 is equipped with a 'cupped' and 'fitted' target that nearly fills the inside area of the ...

Model 626 - Firewater Flow Detection Switch

by Delta Controls Corporation     based in Shreveport, LOUISIANA (USA)

The Delta Controls Model 626 is a target actuated flow switch. It is equipped with a body that fits into and becomes part of the pipeline. It is used to detect very low flow rates in offshore deluge firewater piping systems. The Model 626 is equipped with a “fitted” target that nearly fills the inside area of the in-line pipeline body ...

Dwyer - Model 530 - Vane Operated Air Flow Switch

by Dwyer Instruments Inc     based in Michigan City, INDIANA (USA)

The Model 530 air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple, with only two screws needed. Vane fits 6 in. or larger ducts.

Eclipse - Model 706 - High Performance Guided Wave Radar Transmitter

by Magnetrol Environmental, L.P.     based in Downers Grove, ILLINOIS (USA)

The NEW Eclipse Model 706 high performance transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven and increasingly accepted technology of guided wave radar (GWR). Encompassing a number of significant engineering accomplishments, this leading edge level transmitter is designed to provide measurement performance well ...

Model 624 - Inline Flow Switch

by Delta Controls Corporation     based in Shreveport, LOUISIANA (USA)

The Delta Controls Model 624 is a target actuated flow switch and is equipped with a body that fits into and becomes part of the pipeline. The inside body dimensions and end connections are constructed to match those of the pioeline. This model is simular to Model 621 and is available in 1' to 8' sizes. The Delta Controls Model 624 is equipped ...

Sitron - Model Series CF420 - Thermal Dispersion Flow Transmitter

by Sitron USA Inc.     based in Hauppauge, NEW YORK (USA)

Sitron’s Thermal Dispersion Flow Transmitters provides liquid flow monitoring and control with no moving parts.  All models offer the user the ability to easily set the “zero” and “span” of the flow range so that the 4…20mA analog output corresponds to their application requirements.  This technology ...

ECLIPSE - Model 706 - High Performance Guided Wave Radar Transmitter

by Magnetrol International, Inc.     based in Aurora, ILLINOIS (USA)

The NEW Eclipse Model 706 high performance transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven and increasingly accepted technology of guided wave radar (GWR). Encompassing a number of significant engineering accomplishments, this leading edge level transmitter is designed to provide measurement performance well ...

Need help finding the right suppliers?

Let the XPRTs do the work for you