Flow Modeling (Environmental Modeling) Equipment Near Latvia
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Membrane technology is at the heart of the Infinity 1031 Hi-Flow generator delivering one output of laboratory-grade nitrogen, and two dry air outputs, the Infinity 1031 Hi-Flow generator is a durable, hassle-free solution for SCIEX LC-MS systems. The choice of Infinity model will depend on the application, with different gas ...
-
Manufactured by QED Environmental Systemsbased in USA
Unique bullet shape HDPE shroud provides a low coefficient of friction and allows the pump to slide easily over internal pipe obstacles. Electric Torpedo pumps are available in three casing sizes to fit your requirements. Pump shroud is constructed of High-Density Polyethylene (HDPE) for superior strength and durability (lifetime warranty on shroud). Teflon-fitted stainless steel pump end and ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Instruments fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. Fast response, high flow and high accuracy models feature proportional pressure ...
-
Manufactured by Agilent Technologies, Inc.based in USA
Agilent Bravo Automated Liquid Handling Platform is both versatile and precise, loaded into a small, compact footprint. It is the fastest, most versatile liquid-handling system available. Two Bravo Platform models are available: standard and SRT. The standard model fits in most standard laminar flow hoods. The SRT model is three ...
-
Manufactured by QED Environmental Systems, Incbased in USA
For optimum system air consumption and reduced maintenance. Filter RegulatorsFilter Regulators are recommended for each pump at the wellhead to economize on system air consumption, allow control of pump flow rate, and reduce service needs caused by air system debris and contaminants. These high quality filter regulators are coated on the ...
-
Manufactured by B Meters s.r.l.based in ITALY
The electro-magnetic flow meter model MAG-C has been engineered so to measure the flow and the volume of any liquid that is electrically conductor. Those flow meters do not have any mechanical moving component, and therefore the liquid do not have any obstacle in its flowing, thus avoiding any damage caused by ...
-
Manufactured by QED Environmental Systems, Incbased in USA
This versatile system offers the most flexible pumping setup for every landfill and cleanup pumping need. Designed for reliable, high-performance pumping of almost any fluid under the most difficult operating conditions, TopDrive piston pumps allow for substantial flexibility in depth setting, drive and flow options. There are no ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model ...
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
ION ScaleBuster technology is available in numerous sizes to cover a wide range of flow rates. Our models are equipped with either European (E) or North American (U) connections to address virtually any piping or equipment configuration. The durable construction of ScaleBuster conditioners allows them to provide years of reliable ...
-
Manufactured by Fenno Water Ltd Oybased in FINLAND
We manufacture different kinds of closing gates of steel and plastic. The closing gates can be operated manually or automatically using an electrical or pneumatic actuator. The most commonly used model is a closing gate with a closing plate moving up and down. Automatic gates are also available as flow adjustment models with a stepless ...
-
Manufactured by Sherwood Scientific Ltdbased in UNITED KINGDOM
The Model 420 Clinical Flame Photometer was developed from the Single Channel Model 410 Flame Photometer, with the objective of improving productivity and analytical performance, when measuring Sodium and Potassium. It is available in Clinical (475 42 000) or Industrial (475 42 100) format with appropriate NIST traceable calibration ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
High accurate with intuitive operation. For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
-
Manufactured by 2B Technologiesbased in USA
Total Flow Meter Assembly for Model 400 and 410 Nitric Oxide ...
-
Manufactured by 2B Technologiesbased in USA
Flow Meter Assembly for Models 202 and 205 Ozone ...
-
Manufactured by 2B Technologiesbased in USA
Ozone Flow Meter Assembly for Models 400 and 410 Nitric Oxide ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you