Gas Monitoring (Environmental Modeling) Equipment Available In Nunavut
-
Manufactured by Multisensor Systems Ltd.based in UNITED KINGDOM
The MS1800 is a VOC / Hydrocarbon Concentration Monitor designed for measuring gases in drains and outflows from industrial facilities. The instrument senses gases or volatiles providing a measurement system with very low maintenance requirements. Taking a measurement every 2 seconds, the MS1800 is accurate from less than 1 ppm to 1,000 ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor ...
-
Manufactured by Particles Plus, Inc.based in USA
The Particles Plus EM-10000 is designed for outdoor particulate and gas monitoring. These robust monitors provide reliable, accurate measurement of airborne contamination allowing for the detection of environmental and public health concerns. The first real time monitor to provide 6 accurate particulate size ...
-
Manufactured by Overhoff Technology Corporationbased in USA
Model FM-9XE-NG - Noble Gas Monitor determines noble gas content of air by drawing the air through a gas chamber which is under constant surveillance by a radiation detector. It is normally supplied with a six foot outlet and inlet hose so that it may draw air from the use area, duct, stack, glove box, hood or filter trap. In ...
-
Manufactured by Overhoff Technology Corporationbased in USA
Model FM-9XE-NG - Noble Gas Monitor determines noble gas content of air by drawing the air through a gas chamber which is under constant surveillance by a radiation detector. It is normally supplied with a six foot outlet and inlet hose so that it may draw air from the use area, duct, stack, glove box, hood or filter trap. In ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
The CMG series of gas flow monitor with models for natural gas and compressed air are an efficient way to monitor gas usage. The CMG series offers a wide range of functions, such as instantaneous and integrated flow rate indication, and event output and analogue output. In addition to its wide rangeability, the ...
-
Manufactured by Teledyne Monitor Labs, Inc.based in USA
The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring. The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H2S to SO2. A switching mode alternately measures H2S and SO2 while showing ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI’s Series B14 Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They’re ideally suited for ...
-
Manufactured by Plexus Controls Inc.based in CANADA
System (AAS) can be easily installed at a remote location and connected to multiple ground probe sampling tubes at different heights. The IWS AAS wakes up 4 times a day (programmable) and using an internal compressor to draw an air sample from each of the ground probes in sequence and takes a gas ...
-
Manufactured by ENMET, LLCbased in USA
EX-5100 is a remote gas monitoring sensor transmitter that incorporates a pellistor or catalytic bead sensor. This sensor consists of a matched pair of elements, one active and the other for compensation. The active bead is coated with a catalyst that, when in contact with a combustible hydrocarbon or solvent, causes the gas or vapor to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
as the environmental parameters on micro air station. The system is composed of a gas monitoring unit, opacity monitoring unit, speed/acceleration monitoring unit, license capture unit, micro weather station and IPC of TDLAS and UV-DOAS technology. The system is with rapid and effective measurement, high automation and detection ...
-
Manufactured by Boreal Europe B.V.based in NETHERLANDS
GasFinder is a portable, battery-powered open path gas monitor providing one second response and broad dynamic range. Permanently calibrated, GasFinder is a small and light (less than 5kg) hand held solution. GasFinder response does not depend on path length, so a series of paths of different lengths (between 1m and 1000m) can be measured in ...
-
Manufactured by Gastronicsbased in USA
Designed for stand alone, Class I, Division 2 hazardous locations. This versatile monitoring station features gas and flame detection and plug and play setup for quick and easy deployment. All Gastronics wireless components are interoperable allowing for the customizing of complete turn-key systems to meet the most demanding applications. The ...
-
Manufactured by Boreal Laser Inc.based in CANADA
Primary uses of the GasFinder3-OP are to: Continuously monitor gas concentrations over open area sources. Provide immediate and unambiguous detection of gas leaks. Can be combined with weather data and an atmospheric dispersion model to give a measured emission rate. ...
-
Manufactured by Boreal Laser Inc.based in CANADA
The OPX Head is a measurement head for our series of GasFinder3-DC analyzers that provides a path integrated concentration (ppm-m) in the active measurement path (ambient atmosphere). Primary uses of the OPX Head with the GasFinder3-DC are: Continuously monitor gas concentrations over open area sources. Provide an Immediate and ...
-
Manufactured by Super Systems Europebased in UNITED KINGDOM
eFlo 2.0 is SSi’s newest electronic flow measurement instrument. Like our previous eFlo models, the 2.0 offers simple compatibility with existing controls, making tracking and monitoring gas flows easier than ever. Designed for use in the harshest industrial environments, eFlo allows for easy replacement of manual flow meters and ...
-
Manufactured by Super Systems Inc.based in USA
eFlo 2.0 is SSi’s newest electronic flow measurement instrument line. Like our previous eFlo models, the 2.0 line offers simple compatibility with existing controls, making tracking and monitoring gas flows easier than ever. Designed for use in the harshest industrial environments, eFlo allows for easy replacement of manual flow ...
-
Manufactured by Kytola Instruments Oybased in FINLAND
gas flows. Variable area flow meter Model KL is a sturdy industrial flow meter with a heavy-duty impact resistant polymer flow tube. It comes in a range of different options and offers a choice of end blocks - aluminum, stainless steel AISI 316 or polyamide. It is a reliable instrument for measuring and monitoring liquid and gas flows. ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor's Sentry gas detection solutions have long been the technology of choice for facility managers. With a reputation for innovation and reliability, Sentry solutions have been installed in tens of thousands of facilities that face potential risks from combustible and toxic gases. However, the diligent facility manager ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you