groundwater modeling Equipment

20 Results found
Only show results available in Virginia?
OK
  • Category: Environmental Management ×

  • Subcategory: Environmental Modeling ×

  • Keyword: groundwater modeling ×

AMS - Stainless Steel Bailers

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Collect composite samples from 2' wells and boreholes. Feature a tubular stainless steel body with a wire loop bail and flouropolymer check ball on all models except model #2100.36 which is a top fill model. SST construction allows for quick and easy decontamination. Tapered top on 1 3/4' model for smoother raising and lowering.

Model Auto-Isolator 400 - Pneumatic Pump

by Xitech Instruments, Inc.     based in Placitas, NEW MEXICO (USA)

The Model Auto-Isolator 400 Pneumatic Pump was designed as a controller- less pump which isolates the compressed air from the contaminated groundwater being pumped to the surface.

Solinst - Model 464 - Electronic Pneumatic Pump Control Units

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 464 Electronic Control Unit is available in 125 psi or 250 psi versions, and uses 4 AA alkaline batteries that last up to 100 hours of normal use. These Controllers can also be operated manually, using only a compressed gas source.

Solinst - Model 428 BioBailer™ - Biodegradable Transparent Bailer

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 428 BioBailer™ is a low cost, biodegradable bailer, made of clear PVC. The rigid body is easy to handle and the dense PVC design eliminates the need to use weights in most groundwater sampling applications. It is a

Solinst - Model 408 - Double Valve Pump

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Solinst Double Valve Pump (DVP) is a pneumatic drive pump that allows consistent, high quality samples. It has been field proven in thousands of applications.

Model 5016 8 - Well Controller

by Xitech Instruments, Inc.     based in Placitas, NEW MEXICO (USA)

The Model 5016 Programmable Controller provides central control of up to 8 pneumatic groundwater pumps. The 5016 provided individual pump control, total operating time for each pump, external system shut-down, in-well switching control input, and battery-backed program memory. The 5016 has an easy-to-read two line display displaying 5 different ...

Solinst - Model 425 - Discrete Interval Samplers

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 425 Discrete Interval Sampler is a stainless steel groundwater sampler, with LDPE tubing mounted on a convenient reel. Discrete interval sampling is ideal for obtaining truly representative groundwater samples from below floating product layers, or for obtaining samples of the product itself. The Discrete Interval Sampler can also ...

Willowstick - Mapping and Modeling Groundwater Systems

by Willowstick Technologies LLC     based in Draper, UTAH (USA)

Willowstick provides quick and nonintrusive technologies to identify, map and model preferential groundwater connection paths. Like an angiogram that enables medical personnel to see blood flow inside the body, the Willowstick method is able to quickly identify groundwater flow paths. This technique is a powerful tool for finding seeps through or ...

GEOFLO - Model 40 - Groundwater Flowmeters

by Kerfoot Technologies, Inc. (formerly K-V Associates, Inc.)     based in Mashpee, MASSACHUSETTS (USA)

The Model 40 GeoFlo Groundwater Flowmeter was the first instrument with the ability to provide direct-reading capability in the industry. The technology is based upon the heat-pulse thermal transfer during liquid flow in porous solids.

GEOFLO - Model 200 - Groundwater Flowmeters

by Kerfoot Technologies, Inc. (formerly K-V Associates, Inc.)     based in Mashpee, MASSACHUSETTS (USA)

The Model 200 GeoFlo Groundwater Flowmeter measures horizontal flow rates in-situ or within cased wells using the proven heat pulse technology with the benefits of laptop capabilities.

Groundwater/Hydrogeology

by Golder Associates     based in Calgary, ALBERTA (CANADA)

Golder has one of the largest groups of water resources and contaminant hydrogeologists in the world; we have been solving the most challenging groundwater problems for over 40 years.   Golder’s hydrogeological services include all aspects of the identification, assessment, design, implementation and management for: Groundwater supply, ...

Groundwater/Hydrogeology

by Golder Associates     based in Calgary, ALBERTA (CANADA)

Golder has one of the largest groups of water resources and contaminant hydrogeologists in the world; we have been solving the most challenging groundwater problems for over 40 years.   Golder’s hydrogeological services include all aspects of the identification, assessment, design, implementation and management for: Groundwater supply, ...

GEOFLO - Model 90 - Groundwater Flowmeters

by Kerfoot Technologies, Inc. (formerly K-V Associates, Inc.)     based in Mashpee, MASSACHUSETTS (USA)

The Model 90 GeoFlo Groundwater Flowmeter provides direct vertical waterflow measurements using the proven heat pulse technology with the benefits of laptop capabilities.

Soil and Groundwater Mobile Remedial System

by SHN Consulting Engineers & Geologists, Inc     based in Eureka, CALIFORNIA (USA)

Ozone Sparge System & Soil-Vapor Extraction TrailerOffered at $4,800/month or $185,000 1.H2VE-EN575 Soil Vapor Extraction Blower Package (Rotron EN757 regenerative blower with 5.5 HP, 230 VAC, 60 Hz, 1 phase explosion proof motor)2.H2MS55-3” Cyclonic Moisture Separator (55 gallon cyclonic type moisture separator with 3” inlet and outlet ...

AMS PowerProbe - Model 9520-TR - Hydraulic Hammer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The 9520-TR comes standard with the 90 ft-lb hydraulic hammer, and the option to upgrade to other hammer models. For those situations where you need to install groundwater monitoring wells, you can add an auger drive head. With the choice of two different auger drive heads, and 2 different hammer options, you can't go wrong with the 9520-TR. Some ...

Hydra - Storm and Sanitary Sewer Modeling Software

by PIZER Incorporated     based in Seattle, WASHINGTON (USA)

Hydra software is a full-featured program used by environmental and civil engineers to model and design urban drainage systems. It helps you estimate wastewater flows, and then calculates the resulting hydraulics within the collection system. It provides tools for managing all types of flows, including sanitary wastewater, stormwater inflow, ...

Model 102 - Water Level Meter / Sounder

by LaGa Systems Pvt Ltd     based in Hyderabad, INDIA

The new Laser Marked Model 102 Water Level Indicator is designed to accurately measure groundwater levels in small diameter applications. • 3/8' dia. Brass Probe or 1/4' Stainless Steel Probe• Segmented weights for flexibility• LED Light and loud buzzer indicates water level• Adjust sensitivity to suit your application

GISCO - Model 102 - Water Level Meter

by Geophysical Instrument Supply Co. (GISCO)     based in Minneapolis, MINNESOTA (USA)

The Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter ...

EWO Dolomit - Model 1 to 6 inches - Water Supply Line Installation

by EWO Energie Wasser Optimierung     based in St. Martin, AUSTRIA

A water connection – no matter whether it is the kitchen, bath, washing machine or any other equipment. Even when you are under the shower you can let soft, vitalising water flow massage your skin. Reduce your reliance on detergents, chemicals and cleaning agents and help reduce the burden on groundwater and the environment. EWO Classic can ...

Model FTC - Flow Cells

by Groundwater Innovations     based in Atlantic Beach, FLORIDA (USA)

This FTC (Flow Through Cell) has been designed to protect the valuable sensors of commonly used multiprobes. Unlike models currently on the market the probe guard is NOT removed prior to insertion into this FTC. An internal gasket at the top of the FTC and locking pins make a water tight seal and hold the probe securely in place. Barbed quick ...

Related Terms for groundwater modeling

Need help finding the right suppliers?

Let the XPRTs do the work for you