Environmental Modeling Equipment For Environmental Management In Dominican Republic
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-10159, which is UL labelled and listed, is ideal for automatically reducing a higher inlet pressure to a steady lower discharge pressure, regardless of fluctuations in flow or inlet pressure.The valves are based on the 106-PG control valves and are available in a complete range of sizes from 2 in / 50 mm to 8 in / 200 mm. In typical pressure reducing applications, the globe style ...
-
Manufactured by Mueller Water Productsbased in CANADA
The MCP-TP Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the feedback (process variables) transmitters used, which is similar to (but not limited to) combination automatic control valve functions with conventional ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106 2PR-SC-BT and 206 2PR-SC-BT dual adjustable set point pressure reducing valve using solenoid control is based on the 106-PG or 206-PG valve. The valve is installed with two PR pressure reducing pilots, one set to low pressure, the other to high pressure. The pilot senses the downstream pressure through a connection to the valve outlet. Under flowing conditions, the pilot reacts to small ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is ...
-
Manufactured by Mueller Water Productsbased in CANADA
The LCP-TP Level Controller is a single process level controller designed to complement Singer Valve’s Single Solenoid Operated/Override Control Valves and 4-20mA level sensor or High/Low Level Switches. This combination package is ideal for filling any kind of tank that requires filling to a level setpoint, drawing down the tank level to a secondary setpoint and activating the fill cycle ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Instruments fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. Fast response, high flow and high accuracy models feature proportional pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-8702A, which is ULC labelled and listed, is ideal for automatically reducing a higher inlet pressure to a steady lower discharge pressure, regardless of fluctuations in flow or inlet pressure. The valves are based on the 106-PG or A106PG control valves and are available in a complete range of sizes from 1 in / 25 mm to 8 in / 200 mm. In typical pressure reducing applications, the globe ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SC and 206-PR-SC pressure reducing valves with solenoid shut-off are based on the 106-PG or 206-PG main valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will continue to be controlled even in the event of failure with ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR and 206-PR series pressure reducing valves are based on the 106-PG or 206-PG main valves. The pilot valves sense the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained virtually steady at ...
-
Manufactured by Mueller Water Productsbased in CANADA
The EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve functions with conventional ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 420-DC or 420-AC provide for a reliable, simple and cost efficient way to automate today’s water systems. A sturdy slow speed 24 VDC motor actuator drive can be installed on a variety of Singer pilots. The motor actuator responds to a 4-20 mA signal, rotating the pilot adjusting screw corresponding to the change in signal. The number of turns is adjustable and may be programmed to suit ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer 106/206-2PR-630 Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times. An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve fitted with an extra pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you