Only show results available in Virginia? Ok

Environmental Permits equipment for Environmental Management

  • Premium

    BlueMaster - Model PRO - Commercial Management System

    If you are looking for an AdBue tank capable of safely and securely storing product and enabling commercial retailing then this is the right product choice for you. The BlueMaster PRO range with an integrated Commercial Management System is permitted for Point of Sale use. The management system is compliant with Measurement Instruments Directive ...

    By Kingspan Water & Energy based in Co. Armagh, NORTHERN IRELAND. from Commercial Management System Product line

  • Model WLV - Flushing Valve

    The VLW valve is the complementary and natural accessory for the PLV pump. In fact permits to manage the fluid inlet flow and the relative flushing with solvent with a pneumatic command. The valve permits the possibility to mount a standard proximity sensor to manage also the commutation with a electric safety signal. Another application where the ...

    By MVV srl based in Orsago, ITALY. from Flushing Valve Product line

  • Model 0636 - Air Pressure Sensor

    /ery accurate and rugged sensor for the measurement )f barometric pressure. [he atmospheric pressure deforms a sensing element. \n electronical transducer converts the raw signal and provides a voltage linearly dependent on the baromet-'ic pressure. ]n addition to the analog output a serial port permits Redirect connection of the sensorto a PC.

    By Wilmers Messtechnik GmbH based in Hamburg, GERMANY. from Air Pressure Sensor Product line

  • BESTech - Drainline Simulation System

    Two schools of thought exist regarding methods for testing and comparing the efficacy of biological drainline maintenance products. One states that the widely differing environmental conditions present at various food service facilities minimize the usefulness of testing a particular product at one or a small number of locations, and that only ...

    By BESTechnologies, Inc. based in Sarasota, FLORIDA (USA). from Drainline Simulation System Product line

  • ClassicBond - Check Kerb Trim

    Used For: Used to properly secure the edge of the roof where water does not drain into a gutter. This trim acts as a barrier to water at the edge of the roof. Ideal for both the professional builder and the homeowner, just cut to length required. Corner pieces / edge trims would also be required where an edge trim meets a gutter trim.

    By Flexible Lining Products based in Cinderford, UNITED KINGDOM. from Check Kerb Trim Product line

  • Barrier-Free Steel Wall Mount Fountain

    Model 1025, wall mounted, barrier-free, single bubbler, 11 gauge fabricated steel drinking fountain with green powder-coated finish over a galvanized substrate.

    By Haws Corporation based in Sparks, NEVADA (USA). from Barrier-Free Steel Wall Mount Fountain Product line

  • Model 1025G - Barrier-Free Wall Mount Fountain

    Model 1025G, wall mounted, barrier-free, single bubbler, 11 gauge fabricated steel drinking fountain with galvanized finish.

    By Haws Corporation based in Sparks, NEVADA (USA). from Barrier-Free Wall Mount Fountain Product line

  • Vent and Snuffing System

    In many situations, pressure-relief vapour streams may be safely discharged directly to the atmosphere if environmental regulations permit such discharges. High vent stacks are sized for a high exit velocity at the maximum relief rate to provide excellent dispersion.

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Vent and Snuffing System Product line

  • Electricity Generation Plants

    The Group operates a project development model in the electricity generation area. REACT Energy identifies suitable project sites and then advances projects through the planning and environmental permitting process as well as specifying the appropriate power technology.

    By EQTEC plc based in Cork, IRELAND.

  • Waste Substrates

    E3's technologies permit the economical processing of a wide variety of waste substrates to produce products of value. The cost of waste disposal is thus minimized or eliminated.

    By Environmental Energy & Engineering Company based in Olympia, WASHINGTON (USA).

  • Model SCAR Series - Combination Air Release Valves

    Sewage used combination air release valves have the same principle as air release valves for clean water, but only differ in appearance, with the bodies being considerably longer in height. The elongated bodies serve to minimize the problem of clogging by permitting the use of a long float stem, which creates an air pocket to prevent the sewage ...

    By Shanghai Karon Valves Machinery Co. Ltd. based in Shanghai, CHINA. from Combination Air Release Valves Product line

  • ICM - CO2 Scrubber Structured Packing Retrofit

    The CO2 Scrubber Structured Packing Retrofit allows your plant to increase production rates without the risk of compromising permitted emission limits due to fermenter venting. This helps your facility adhere to the Clean Air Act and also offers the cost-avoidance benefit of potential air permit emissions violations due to Pressure Safety Valves ...

    By ICM, Inc. based in Colwich, KANSAS (USA).

  • URC - Model R-MAG 109 - Portable Wood Waste Grinder

    (PDR-109-800HP) This model is based on the foot print of the PDR-96 Contender, but is larger, stronger, has a larger hopper and infeed and is more productive than anything we have ever built. It is 10' wide and requires permits.

    By Universal Refiner Corporation (URC) based in Montesano, WASHINGTON (USA).

  • OptiFlo Cartridge Collector

    The OptiFlo cartridge collector system is a completely modular design that allows an unlimited range of sizes. The compact modules help conserve valuable space, and can be interconnected to accommodate the largest air cleaning task. OptiFlo units have the lowest flange-to-flange pressure drop, allowing up to 10% greater airflow with lower fan ...

    By AAF International Ltd. based in Louisville, KENTUCKY (USA). from OptiFlo Cartridge Collector Product line

  • FTS - Model (DTS-12) - Turbidity Sensor

    The DTS-12 is the first sensor to make turbidity monitoring practical. The value of continuously monitoring turbidity has long been recognized, but it’s always been difficult, inaccurate, expensive, labor-intensive, and therefore often dismissed as too impractical. The DTS-12 is different—we state with confidence that it’s the ...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA). from Turbidity Sensor Product line

  • Weil McLain - High Trim Baseboards

    Attractive design that can be painted to match any décor. Designed for high heat loss and limited wall space installations. Made of pre-coated cold-rolled steel. Damper with finger-touch operation permits easy temperature control.

    By Weil-McLain based in Michigan City, INDIANA (USA). from High Trim Baseboards Product line

  • Re-Cyke - Model VSD Series - Sewer Discharge Systems

    Many municipalities permit the discharging of wash water into sanitary sewer systems as long as the quality of the water will meet their discharge standards. The VSD-Series Sewer Discharge Systems are designed to remove substantially all of the oil, grease, solids and other major contaminants to meet the discharge standards. The treatment process ...

    By Waste Water Design, Inc. based in Jupiter, FLORIDA (USA).

  • High Cement Mobility Grouting

    Cement grouting, also known as slurry grouting or high mobility grouting, is a grouting technique that fills pores in granular soil or voids in rock or soil, with flowable particulate grouts. Depending on the application, Portland cement or microfine cement grout is injected under pressure at strategic locations either through single port or ...

    By Hayward Baker Inc. (HB) based in Odenton, MARYLAND (USA). from High Cement Mobility Grouting Product line

  • Aadco - Zero Air Gas Generators for Benchtop

    Aadco manufactures zero air gas generators that house components capable of output volumes of 0-50 and 0-100 liters/minute; 0-20 and 0-30 Liters/minute and 0-1, 0-5 and 0-10 Liters/ minute respectively.

  • Fixed Wheel Gate (Roller gate)

    Roller gates are typically used for Gravity/Emergency closure and where waterways are too large to efficiently use slide gates. The rollers (wheels) are mounted on shafts fixed laterally to the leaf on vertical girders have double functions: reduce the friction forces and transmit the water load to the embedded parts. Upstream sealing is preferred ...

    By Mecan-Hydro based in Granby, QUEBEC (CANADA). from Fixed Wheel Gate (Roller gate) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you