Environmental Regulations Applications available in Mozambique
-
Premium
Continuous Emissions Monitoring Calibration Systems (CEMCS)
The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Gas analyzers and monitoring systems for aluminum production sector
Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions to the atmosphere. Read about our solutions for aluminum ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Determination of trace elements and macroelements in water samples
Determination Of Trace Elements (AL, AG, AS, BA, BE, CD, CO, CR, CU, FE, LI, MN, MO, NI, PB, SB, SE, SR, TI, V, ZN) and Macroelements (NA, K, CA, MG) in Water Samples Introduction The method is designed to measure the concentration of elements in a variety of water samples, including natural water, tap water, drinking (incl. bottled) water, wastewater, mineral water, etc. Embracing the challenge of measuring both trace and macroelements in one instrument, Lumex Instruments presents the Graphite Furnace Atomic ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Environmental Solution for Mitigating Dust Particle Dispersion in Air
Mining and quarrying activities contribute to dust emissions from periodic explosions and heavy transportation vehicles. Subsequently, many industrial processes emit particulate matter mainly mineral, metallic, and wood dust. This phenomenon worsens air quality and increases the cases of respiratory ailments like asthma, bronchitis, etc. Dust measurement on these sites becomes critical as it can affect overall ambient air quality conditions. Construction activities are also one of the major sources of airborne ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Mercury analysis for quality inspections
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Water treatment solutions for food and beverage industry
Food and beverage processing companies have unique challenges requiring advanced food and beverage water treatment and wastewater treatment solutions. These challenges include optimizing water efficiency and meeting regulatory compliance standards. There are typically four main water processes involved in food and beverage processing. These processes are cooling water, process water, boiler feed water and process wastewater. The typical allocation of water used in each process varies by industry, from about 60-65% ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Gas monitoring instruments and systems for stack testing according to EPA test method 320
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Air pollution control for the energy & heat recovery industry
Protect Your Profit Margins. Anguil’s Engineering expertise and flexible solutions ensure payback and optimized performance so your plant can reduce operating costs and greenhouse gas ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Gas monitoring for steel applications
The combustion operations the iron and steel processes produce emissions which are subject to strict environmental regulations. Plants are required to monitor and control these emissions. This also provides process efficiency ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Chemical Water Treatment for drinking water
Kurita specifically developed product ranges for drinking water treatment, in order to avoid any kind of problem that might occur with the preparation, transport or use of drinking water. Our technologies can be used for all kinds of conditions, from municipal water suppliers to private buildings (e.g. hotels, universities, hospitals and private ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Air pollution control for the metal decorating industry
Maintain Production Schedules and Profit Margins. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Air pollution control for the paint & painted products industry
Anguil’s engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on producing quality painted ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Activated carbons solutions for personal protection industry
The Challenge: Manufacturers of personal protection devices are driven to safeguard the public health caused by airborne chemical contaminants. Removal of these contaminants is technically demanding, and manufacturers must meet this technical challenge while navigating stringent regulations. Jacobi’s understands this unique blend of technical and regulatory challenges for personal protection devices faced by our customers. Jacobi provides many different formats of product that are used in different aspect ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Wastewater treatment management for drinking water industry
Water scarcity, aging infrastructure and increasingly stringent environmental regulations regarding disinfection byproducts and emerging contaminants are challenges facing municipalities around the world. Large cities, small cities, communities and water utility operators globally are seeking advanced, innovative and efficient drinking water treatment solutions. These solutions will assist them to meet the needs of an expanding population in a cost effective and sustainable manner while achieving increasingly ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Continuous Emissions Monitoring System (CEMS) for Determination of a Gas
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Air Quality Monitoring for Communities & Environmental Justice groups
Every community deserves healthy air quality. Exposure to polluted air can lead to short-term and long-term health issues — particularly for those living in low-income and communities of color that are disproportionately impacted by air pollution from sources such as major highways, industrial operations, and ports with diesel truck ...
By Clarity Movement Co. based in Berkeley, CALIFORNIA (USA).
-
Premium
Wastewater treatment management for pharmaceutical industry
Pharmaceutical companies today are operating in a challenging environment. Pharmaceutical wastewater treatment management is increasingly becoming critical to the entire operations of a pharmaceutical manufacturer. These companies are facing challenges of water scarcity requiring them to look more closely at employing pharmaceutical wastewater reuse strategies for cost management. In addition, companies in this industry are faced with tighter regulatory water discharge ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Gas flow management solutions for standard applications sector
Standard Applications of Gas Flow ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you