EU Directives Applications in Germany
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Airports
Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Power Plants
Opsis offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been approved by the German TÜV and the U.S. EPA among ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Tunnels
The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Fence-Line Monitoring of Fugitive Emissions
The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Process monitoring solutions for NH3 truck engine monitoring
A new EC regulation states that diesel engines need to have active cleaning with urea injection in order to reduce NOx emissions. In order to control the urea dosage, a reliable measurement system is required. OPSIS LD500 laser diode gas analyser for monitoring ammonia (NH3), has been tested and approved by German TÜV, in accordance with the EURO VI ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Air Quality Monitoring Stations
Opsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TÜV and the U.S. EPA among ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Premium
Emissions Monitoring for Cement Plants
Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high ...
By OPSIS AB Office in Erftstadt-Lechenich, GERMANY.
-
Measurement and control systems for the Limiting the level - electronically
A distinction is made between low water (LW) and high water (HW) limiters. Whereas LW limiters are in principle required for the safe operation of a plant in accordance with European regulations, HW limitation (overfill protection) is required only in accordance with TRD 604 for 72-hour ...
By IGEMA GmbH based in Münster, GERMANY.
-
Water monitoring system for surface water industry
The EU Water Framework Directive (2000/60/EC WFD) is probably the most significant international legislative instrument in the water field. Water management policy as set out in the WFD is focused on surface water as it flows through river basins to the sea. An integrated approach has been introduced for matters concerning water quality and water quantity and the Directive establishes a framework for water management based on river basin districts. Linked to the WFD objectives, a series of milestones has to be ...
By microLAN B.V. - Aqualabo Group Distributor in Schenefeld, GERMANY.
-
Water monitoring system for waste water industry
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
By microLAN B.V. - Aqualabo Group Distributor in Schenefeld, GERMANY.
-
City Noise Mapping
CadnaA is an excellent tool for the calculation of noise maps and for Strategic Noise Mapping according to the EC Directive on Environmental Noise. A great number of users value its richness in features, calculation speed and last but not least, usability. Numerous noise maps of cities and even entire countries have been calculated and are calculated using CadnaA. ...
By DataKustik GmbH based in Gilching, GERMANY.
-
Water monitoring instruments for water quality monitoring
Measuring and looking after our water resource is a hot topic worldwide. Governments, Councils, Water Authorities, Companies and individuals all are increasing their efforts to help protect this resource. EU Legislation around monitoring landfills, nitrate levels and the water framework directive have been introduced to help guide water quality monitoring. Aquaread’s range of water quality instruments are all suitable for spot, short and long-term deployments and are a popular choice for companies as they ...
By Aquaread Limited Distributor in Zeitz, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you