EU Directives Equipment For Environmental Management Available In Gabon
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93L inline type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ± 100°F. The FLT93L is easily field-configured or factory preset, providing ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Truly robust crawler-based CPT penetrometer pushing rig with rubber tracks, Hatz 3-cylinder diesel engine incorporated in a sound insulating enclosure, load-sensing hydraulic pump, a 200 kN CPT penetrometer pusher, unique anchoring system on reaction arm. Practically all functionalities are controlled by means of a wireless remote control. The Griffin 200 kN is made of the highest quality ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA180E is an 8-inch mobile electric pump and suitable for pumping dirty water with solids up to 80 mm. The centrifugal pump is vacuum assisted and therefore dry self-priming. We use efficient electric motors designed to meet various requirements across markets. You can choose from a stackable frame or a sound attenuated canopy. We can install a soft starter or a variable frequency drive in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
-
PremiumManufactured by Monarch Instrumentbased in USA
The ACT-3X Panel Tachometer is a powerful NIST calibrated, fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240 V ac input power or from 12 or 24 V dc input power (optional). Programming is easily performed through the 5 front panel pushbuttons or using the free downloadable PM ...
-
PremiumManufactured by Monarch Instrumentbased in USA
The F2A1X Frequency to Analog module converts a frequency input signal into a proportional analog voltage (0-5 V dc) or current (4-20 mA) output. The output signal is electrically isolated from the input signal and input power source, effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A 200 kN trailer-based CPT penetrometer rig is a lightweight and economical rig with full CPT testing capabilities. It is suitable for both electrical and mechanical CPT testing. It can be towed easily by a 4-wheeldrive car. It comprises a sturdy 2-axle trailer base, a 2-cylinder CPT penetrometer pusher, a diesel-hydraulic power-pack with load-sensing pump, manually operated valves, a work ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Monarch Instrumentbased in USA
The F2A3X Frequency to Analog Converter is a DIN rail module that converts a frequency input signal into a proportional analog voltage (0-5 V dc) or current (4-20 mA) output. The output signal is electrically isolated from the input signal and input power source, effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 110 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Crawler-Truck CPT Penetrometer Rig (lightweight) – Max. 170 kN. The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you