Fluid Handling Equipment For Environmental Management Near Solomon Islands
-
Manufactured by SeaMetrics, Inc.based in USA
The PE202 magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4' to 1/4' pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE202 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts (100% PVDF body and ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
Flows to 108,000 litre/hour, 16 bar. Double pump uptime in tough fluid handling duties. Suction lift to 30 feet, dry running and reversible. Eliminate ancillary ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability and accuracy for process temperatures that vary up ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
Manufactured by Enretech Australasia Pty Ltd.based in AUSTRALIA
These natural cotton pads and rolls are designed for hydrocarbon spills. The natural, biodegradable cotton offers superior absorbency and improved strength and durability. They are most effective when used in conjunction with a loose particulate sorbent, such as ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
Horizontal External Bearing Twin Screw Pumps are suitable for handling fluids with different characteristics at different temperatures (up to 3507660°). These pumps are available in standard foot mounted & center-lined mounted configuration with or without steam jacketing arrangement. Due to external bearing mounted design, the media does not come in contact with the bearings and thus ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
Roto's Vertical Twin Screw Pumps are available in both external & internal bearing configurations. These pumps are designed to suit the applications where space is a constraint. These pumps can handle fluids with high temperatures up to 3500C / 6600F with or without steam jacketing. Electrical/steam tracing arrangement is available as an option. The mechanical seals are provided as standard. ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
These Heavy Duty Semi-Hygienic Pumps are designed for handling food and beverages pumps industry applications. All metallic parts in contact with the medium being handled are fabricated in smooth finish stainless steel. These food pumps are provided with metal bonded aseptic food grade stator resistant to oil & fats. These pumps are standard with closed universal joints enabling it to handle ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and ...
-
Manufactured by Woodland Engineersbased in INDIA
The JEC Pump is a horizontal volute casing, single stage centrifugal pump, is manufactured in accordance with Din 24256 (ISO 2858} standard. Designed for thermic fluids and hot water process conditions, Sturdy discharge cover designed for high stiffness, Optimised heat barrier & low wear. Design variant with bearing for high resistance. Reinforced deep-groove ball bearing with special grease ...
-
Manufactured by Woodland Engineersbased in INDIA
To support core markets which are Oil and Gas, Textile, Chemical, Paper and Sugar, Plastic, Pharmaceutical & Food, Plywood, Rubber, Water, and Industrial ...
-
Manufactured by Affetti Pumps s.r.l.based in ITALY
The MSP-T version is designed to pump corrosive fluids containing a limited quantity of suspended solid particles. The impeller is driven by a steel shaft fixed rigidly to the motor. The externally fitted mechanical seal is the single, B6E system with rings in SiC and elastomer bellows; it is also equipped with a washing system using water or clean fluid compatible with the fluid ...
-
Manufactured by Varisco s.r.l.based in ITALY
The J self-priming centrifugal pumps are used in applications requiring a fast priming capacity from demanding suction heights combined with the ability to transfer and manage polluted, waste and abrasive fluids with suspended solids. The system features an inspectable pump casing, which also acts as a water tank allowing for early quick priming without auxiliary systems, simplifying system ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Purpose Built Flame Photometer with specialised software, firmware and hardware. The BWB BIO has been created for measuring biological solutions and is modernized for today’s research work; which requires routine, quick measurements, with high levels of accuracy for lithium, calcium, sodium and potassium elements. Our recent release is the combination of several “wish lists” ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Simple, robust & reliable Automated Fluid Handling System that works seamlessly with BWB’s range of Flame Photometers. BWB customers rely on our instrumentation that may run throughout the day processing tens or even hundreds of samples. Until now this operation has been a manual process and requires an operator present to introduce each sample. Many organisations are striving for ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Purpose Built Flame Photometer with specialised software, firmware and hardware. The BWB BIO AV is an offshoot of the popular BWB BIO. A simplified menu structure and enhanced Li detection make it a welcome addition to the BWB family. The ability to calibrate and measure Sodium, Potassium, and Lithium at the same time with the same dilution (from 1:6 to 1:100) streamlines throughput in many ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels. The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Purpose Built Flame Photometer with specialized software, firmware and hardware. The BWB BIO 943 is an offshoot of the popular BWB BIO. A simplified menu structure and enhanced Li detection make it a welcome addition to the BWB family. The ability to calibrate and measure Sodium, Potassium, and Lithium at the same time with the same dilution (from 1:6 to 1:100) streamlines throughput in many ...
-
Manufactured by RHINOFLEX VALVE SOLUTIONS PLY LTDbased in AUSTRALIA
TheSeries-22 Quarter-Turn Dia-Cam valve is a high flow capacity pinch valve. Designed for hard-to-handle fluids specially slurries. The valve interior consists of fabric reinforced elastomeric or PTFE lined Diaphragm Spool.the only wetted component of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you