Greenhouse Gas Equipment For Environmental Management Available In Sierra Leone
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Datum’s Marine Shaft Power Meter Systems are developed to provide real time and ongoing power monitoring data on propulsion shafts, thrusters and diesel generators. These devices are commonly used for fuel economy monitoring and equipment maintenance planning programs and can be used in conjunction with our EEXI | ShaPoLi solution to keep vessel owners in line with the latest legislation. ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The fl exible K176R21 / R31 / R32 routers allow remote access to the connected DILO device via the Internet. The router is protected in the transport case and can be magnetically attached to a wide variety of devices with just a few simple steps. The Internet connection is possible via LAN or mobile network. Error analysis, operation or software adaptation of the connected devices can thus be ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The use of amine is a leading technology for CO2 removal in petrochemical and fertilizer plants and capture of CO2 from flue gas generated in coal-fired power stations as part of the Carbon Capture and Storage (CCS) approach to the mitigation of global warming. Amine solvent technology has been widely used for many years to capture CO2 and H2S in oil refineries and gas processing plants in order ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The mobile suction pump allows upgrading old SF6 maintenance devices. Thus it is possible to recover the SF6 gas from the gas compartment to a final vacuum of 1 mbar by connecting in series the mobile suction ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The L170 service cart has been developed to recover, evacuate, fill, purify and vent large to extra large SF6 gas compartments with high process reliability. Thus, a gas compartment with 1,000l and 5 bar pa can be recovered down to 1 mbar in only 38 minutes*) when using the DN40 coupling**). Thanks to the state-of-the art control all functions run automatically and are displayed on a 10“ ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Fast mid-range measurements in cities or near industrial areas. The GC955 118 Methane model from Synspec is specifically designed to provide fast mid-range measurements in cities and near industries. It is equipped with a compact oven with a column that separates methane from other hydrocarbons, and features an FID detector resulting in two distinct peaks: one for methane and one for total ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The compact service unit has been specially designed for very small SF6 gas quantities and is perfectly suited for applications such as SF6 gas handling on medical devices, electron microscopes or in research centres. The small and compact device includes all functions required for professional and emission-free SF6 gas handling: recovery down to 2 mbar, liquid storage in an external pressure ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The H25-IR PRO is a next generation industrial-grade refrigerant leak detector and gas analyzer capable of detecting over 40 of the most commonly used refrigerants and halogen gas compounds. Special models measure and detect R600a, R290, R744 (CO2) or SF6. It can be used to locate and then quantify gas leaks, as well as log and totalize a group of leaks in a system. The H25-IR PRO adds new ground ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This compact service unit has been specially designed for very small gas quantities and is perfectly suited for applications such as SF6 gas handling on medical devices, electron microscopes or medium voltage components. The device includes all functions required for professional and emission-free SF6 gas handling such as: gas recovery down to < 10 mbar, purification during the recovery and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This bag is a simple and cost-effective system for collecting measuring gas in case it cannot be returned directly into the circuit breaker. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the SF6 from up to 25 measurements. The gas can be removed by means of any service cart. When ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Measuring CO2 gas involves the use of two main technologies: Tunable Diode Laser Absorption Spectroscopy (TDLAS) and Non-Dispersive Infrared (NDIR). TDLAS is a relatively new technology that relies on the absorption of light in order to measure the concentration of CO2 in a gas. It uses a laser to detect the molecules in a sample, and then calculates the concentration based on their optical ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The Mirror-Analyser SF6 uses the physical dew point mirror measuring principle which is characterised by its high precision and utmost reliability in order to measure the moisture content. By cooling the integrated mirror the moisture content of the gas is determined by measuring the temperature depending on the condensation or icing of the mirror. The other parameters of SF6 quality are ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. The DensiControl DA allows quick checking to see whether the density monitor switching points are triggered in time. This device allows precise, quick and easy verification of the switching points. The density monitor type to be checked is selected in the data base and is then installed ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the preset filling value. After having pressed the start key, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you