Industrial Hygiene Equipment For Environmental Management In Minnesota
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Highly Accurate, Stable, Quantitative, and Remotely Controllable Gas Monitoring System. Advanced Energy's Innova 1512 is based on the photoacoustic infrared spectroscopy and delivers superior sensitivity in a very compact form factor. Extremely versatile by design, the 1512 is capable of measuring almost any gas that absorbs infrared light. Leverages the unique strengths of the photoacoustic ...
-
Manufactured by Kanomax USA, Inc.based in USA
AnemomasterTM LITE is a compact and lightweight hot-wire anemometer unit. It offers research-grade accuracy at an aordable, industry competitive price. It comes in a dark metallic blue casing with anti-slip ...
-
Manufactured by TSI Incorporatedbased in USA
The Real-Time, Quartz Crystal Microbalance (QCM) MOUDI™ impactor is a precision research-grade impactor with real-time mass detection based on QCM sensors. The impactor has a 2.5-µm inlet and six QCM stages with sharp collection efficiency curves and calibrated cutpoints of 960, 510, 305, 156, 74 and 45 nm at 10 L/min inlet flow rate. ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak II Aerosol Monitor 8532 is a handheld battery-operated, data-logging, light-scattering laser photometer that gives you real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. It is suitable for clean office settings as well as harsh industrial workplaces, ...
-
Manufactured by TSI Incorporatedbased in USA
Q-Trak Indoor Air Quality Monitor Model 7575 provides quick, accurate information to assess key indoor air quality, or IAQ, ...
-
Manufactured by TSI Incorporatedbased in USA
Our handheld DRX Aerosol Monitor is a multi-channel, data-logging, laser photometer for real-time aerosol readings. Portable design allows you to measure dust, fumes, mists and smoke and is suitable for engineering control ...
-
Manufactured by Kanomax USA, Inc.based in USA
The AT400 and TAT420 air velocity transmitters supply accurate air velocity and (TAT420) temperature data from a building or process airflow on a continuous basis to a computer, chart recorder, printer and meter or control circuit. The THT500 humidity-temperature transmitters supply accurate humidity and temperature data from a room or process air source on a continuous basis to a computer, chart ...
-
Manufactured by Electro-Sensors, Inc.based in USA
The Electro-Sentry 1 is a hazard monitoring system commonly used on grain elevator legs or conveyors to monitor critical points for shaft slowdown, bearing temperature, and belt alignment as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage, and process downtime. All Electro-Sentry 1 sensors ...
-
Manufactured by TSI Incorporatedbased in USA
The Primary Calibrator 4046 has a range of 2.5 to 300 liters per minute (L/min). This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be made in real-time. This primary calibrator is accurate to +/- 2% of ...
-
Manufactured by Kanomax USA, Inc.based in USA
CO, CO2, Ammonia, Formaldehyde, Ozone, VOC and over 20 other gases. Handheld gas monitors are suitable for indoor, industrial and outdoor air quality monitoring. Compatible with over 20 different interchangeable sensor heads, one monitor can be used to measure multiple gases and concentrations. Interchangeable sensor heads also make servicing the monitors as simple as replacing the old head with ...
-
Manufactured by Electro-Sensors, Inc.based in USA
TT420-LT temperature probes and fittings are optimized for shaft bearing (TT420Z-LT), belt rub-block (TT420S-LT) and other temperature measurement applications. All models have integral liquid/dust-tight conduit fittings allowing complete sensor and cable segregation and ...
-
Manufactured by TSI Incorporatedbased in USA
The DRX Aerosol Monitor can measure both mass and size fraction at the same time and provides a gravimetric sample. It is suitable for indoor and outdoor applications, industrial and occupational hygiene, baseline screening, remote monitoring and research ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax IAQ Monitor - Model 2212 features quick start-up and high accuracy in measuring carbon dioxide and carbon monoxide concentration levels in the environment. Temperature and humidity are also simultaneously measured in a handy lightweight ...
-
Manufactured by TSI Incorporatedbased in USA
This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be made in real-time. This primary calibrator is accurate to +/- 2% of reading. The Primary Calibrator 4146 has a range of 0.01 to 20 liters per minute ...
-
Manufactured by TSI Incorporatedbased in USA
TSI Model 8025 Fit Test Adapters provide an easy, practical alternative to the probed test mask method of quantitative fit testing by allowing an individual to be tested in his/her own respirator. TSI Model 8025 Fit Test Adapters are designed to enable individuals to be quantitatively fit tested in their own respirator. The sampling adapters yield the same results as fit tests using the ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Anemomaster Rotating Vane 6810 Series of anemometers offers a range of highly accurate airflow measuring devices. Models include industrial grade enclosure and probe. They automatically calculate volume flow in CFM (cubic feet per minute) or CMH (cubic meters per hour). When measuring ducts dimensions are stored in memory on turn-off and do not need to be re-entered. These vane anemomters can ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI impactors are classic, precise cascade impactors with sharp cut-size, low internal-loss characteristics, and high accuracy. These cascade impactors provide sharp cut-sizes, low internal losses, and high accuracy in a non-rotating configuration with a 30 L/min smapling flow rate. The MOUDI impactors, 100NR, 100S4, and 110NR, are used for collecting size-fractionated particle samples in the ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax Dust Monitor 3443 is a compact and high quality instrument ensures highly accurate dust measurements via a user-friendly & intuitive ...
-
Manufactured by TSI Incorporatedbased in USA
Models 128, 129, 130 and 131 are High Flow Impactors (HFI) ideal for sampling particles at low concentrations (pristine environments), for collecting more mass per stage as compared with conventional MOUDI™ impactors, or for obtaining samples in shorter sampling intervals. HFI impactors are available with 3, 4, 5 or 6 stages in the 0.25 to 10 µm aerodynamic size range. Particle ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you