Industrial Pollution Control Equipment For Environmental Management Available In Netherlands
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 443-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features three convolutions and is designed for moderate movement and ease of system ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The PROCO 231/ET Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 231/ET expansion joints is especially prevalent in the paper industry, where their ability to resist corrosive attack at elevated temperature and pressure is ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 442-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features two convolutions for minimal movements, higher pressure/temperature ratings, and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 440 BE Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Each Proco Series 300 Flanged Rubber Pipe Connector is specifically engineered for your particular application. Multiple plies of tough fabric and helical spring steel wire are embedded into the pipe wall during the manufacturing process, resulting in a product precisely designed for your pressure and vacuum ...
-
PremiumManufactured by ENVEAbased in FRANCE
Cairnet® DATA+ is a real-time air quality monitoring station including up to six Cairsens® micro-sensors. It also monitors environmental parameters such as wind speed and direction, T°C, RH% and Pa. The device has been designed to leverage local communication and features main power supply as well as cellular communication. It can acquire data from complementary sources such as ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 262R molded wide double arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 261R molded wide arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 445-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Ozone Compatible Valves: The 36 is a full port, 316 stainless steel, and 3 piece ball valve. It is available with threaded ends (36N), socket weld ends (36S), quick clamp ends (36C) or quick clamp ends with cavity filler seats (36CCF*). It can be equipped with a manual handle or with pneumatic or electric actuators. A full range of accessory items is available including limit switches, solenoid ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
For a less demanding, lower throughput gas cleaning system, the venturi scrubber is a well tested and respected design used by many industrial processes. It uses a combination of vortex technology and high pressure water misting to remove harmful elements from the exhaust ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes shows its flexibility and adaptability in its ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you