Laboratory Information Management Equipment For Environmental Management Available In Liberia
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental Agency, and is documented in ISO 6144 as a ...
-
Manufactured by RobSolutions, part of the United Robotics Groupbased in GERMANY
With its versatile collaborative robot arms, uLAB ensures intelligent laboratory automation in a variety of fields. Our uLAB increases overall efficiency during workload fluctuations and is easily integrated into the existing LAB-workflow. The innovative uGO software platform ensures intuitive control of the uLAB workflow via a “Drag & Drop” interface, which allows control over ...
-
Manufactured by Climet Instruments Companybased in USA
The Smallest and Lightest Industrial & Pharmaceutical Grade Portable Counter Available. Aerosol Pharmaceutical grade, a 6-channel instrument with a built-in printer, pdf reports, and up to 6 hours of continuous operation (depending on model). The most advanced technology and features ensure the highest level of accuracy and repeatability of ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be equipped with up to four independent infrared cells according to the user‘s requirements, allowing for a great variety of ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA‘s CHS-580A is the ideal analyzer for the simultaneous determination of carbon, hydogen and sulfur in organic samples. ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CHS-580A ...
-
Manufactured by Ducom Instruments (USA) Inc.based in USA
The UNITEST can be equipped with a variety of loading and sensing heads that are quickly interchangeable. These heads are available with force measurement capabilities in 1, 2, 3 and 6 axis. These load cells can be strain gauged, capacitive or piezoelectric. Our patented multi-axis load sensor offers unparalleled performance in a compact form factor. Another one of our patented sensor is designed ...
-
Manufactured by Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample ...
-
based in FINLAND
We provide Laboratory Information Management Systems (LIMS) that are rich in ready-to-use functionality, but also highly configurable. Our LIMS solutions, LabVantage Enterprise and LabVantage Express fit the needs of all laboratories in different fields and disciplines. Our expert implementation services guarantee that we are able to provide a laboratory informatics solutions to effectively ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The TO8 evolution olfactometer combines the advantages of the popular TO8 olfactometer and sophisticated TO evolution olfactometers. The new WiNose laboratory information management system (LIMS) supports odour laboratories in fulfilling quality management procedures and to increase efficiency in day-to-day lab operation by managing equipment, samples, measurement results and panel data in a ...
-
Manufactured by Labforward GmbHbased in GERMANY
The laboratory is the optimal environment for automation. Consisting of a complex array of equipment, from beakers and bunsen burners to incubators and centrifuges, it is an ecosystem that relies on standardisation, replicability and accuracy, features that make it well-suited to automation. Its purpose is to connect a researcher to their equipment, so they can access and control experiments at ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The TO9 evolution olfactometer has all the functionality of the TO8 evolution, plus the dual-forced choice method. The maximum dilution increases to 2^17 allowing you to measure samples of higher odour concentrations than is possible with the TO8 evolution. Just as the TO8 evolution, this olfactometer can be used equally as a home-based laboratory, as well as a mobile on-site laboratory to keep ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA's CS-2000 is the only analyzer on the market for thedetermination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the CS-2000 is equipped with both an induction and a resistance furnace (ELTRA Dual Furnace Technology), covering the full range of carbon and sulfur analysis. The CS-2000 is available with up to four independent infrared cells, which allow the ...
-
Manufactured by QIAGEN GmbHbased in GERMANY
The EZ1 Advanced XL performs automated nucleic acid purification for a wide range of sample types relevant for molecular diagnostics, human identity testing, forensics, biomedical research, and gene expression ...
-
Manufactured by Entech Instruments, Inc.based in USA
The 7200 Preconcentrator represents the next generation in GCMS sample preparation systems for the analysis of vapor-phase volatile compounds. The 7200 takes the industry standard, 7100A’s 3-stage preconcentration and water management technology, and elevates it to a whole new level. Many of the past limitations often seen in rotary valve based devices are now eliminated by combining ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample combustion. Up to four highly sensitive infrared (IR) cells allow the analyzer to determine both high and low carbon and sulfur concentrations in only one measurement run. The measuring ...
-
Manufactured by Navas Instrumentsbased in USA
SHT-2010 model is semi automatic, the operator turns the knob of the digital micrometer to enter a distance and then presses a key (Configurable by software) on the keyboard, the instrument moves from lens to indenter automatically, auto triggers and makes an indentation, after the indentation is made the instrument moves from indenter to lens automatically, then the operator focus and measures ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CS-580A is based on the technology of the CS-580 analyzer and features a vertical resistance furnace with ceramic tube. The temperature can ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
ELTRA‘s CHS-580 is the ideal analyzer for the simultaneous determination of carbon, hydrogen and sulfur in organic samples.Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be ...
-
Manufactured by Lucas-Nuelle, Inc.based in USA
SybaNet control unit/touch-panel PC, for control and monitoring of classrooms or laboratories. All functions controlled and monitored via (master) touch panel via accompanying (Lab Manager) software. All switch states for the various student workstations can be graphically displayed (user menu). Configuration and log-in from the various workstations are also implemented via the touch panel (admin ...
-
based in INDIA
Qualis LIMS Software is an easy-to-use but very versatile and advanced Laboratory Information Management System that can be used across all industry verticals. Qualis LIMS has been designed to digitally transform Laboratories to perform their tasks in an automated and paper-less manner, and more importantly enable them to fulfil regulatory compliance requirements and adhere to industry ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you