Lubrication Systems Equipment For Environmental Management Available In St. Vincent & The Grenadines
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4NMP pump is designed with Cornell's renowned quality and durability. It features a 4" discharge and a 4" suction with an enclosed, single-port impeller. Cornell's patented CycloseaP design is optional, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces for abrasion resistance. Also available with ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Polychem idler stub shafts are the lightweight alternative to traditional full-width steel shafting and cast iron wall bearings. We offer two base diameters and lengths to accommodate sprocket centerlines from 9 to 29 inches off the wall, allowing customized stub shafts to fit various tank sizes, system loadings, and existing structural ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI's AS-FS Series flow switches utilize no moving parts, ultra-reliable thermal dispersion flow measurement technology to detect a flow rate above or below a predetermined set point at the sensing location. They are applied to signal low flow or high flow alarm conditions in air or liquid fluid flows throughout the aircraft. FCI offers two versions, one for air flow and one for liquid flow ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
Each pump is fitted with a standard gearbox reduction system and with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.37 KW as the European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 pole and 1 phase voltages of 230/50/60 Hz or 110/60 Hz. As motors conform to UNEL-MEC specifications, there are many ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-TIP tipping bucket is a sediment flushing system designed to remove settled debris from reservoir floors, such as stormwater or CSO retention tanks and sanitary equalization tanks. The system operates by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses down the entire length of the flushway pushing the settled debris ahead of it. The ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 10NHPP pump is designed with Cornell's renowned quality and durability. It features an 10" discharge and a 10" suction with an offset volute and enclosed, single-port impeller. Cornell's patented CycloseaF design is optional, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces for abrasion resistance. Also ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The B80 KGK G2 series (with open impeller) is a powerful and robust centrifugal immersion pump with plain bearings, drive lantern mounted on roller bearings and IEC standard motor. The Pumped medium is discharged from the tank via the radial pump outlet and the vertical riser pipe. The power transmission from the Motor to the pump is effected by means of a torsionally flexible, positive-locking ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features the combination of small size, low cost and no moving parts with 24 Vdc input power to provide the perfect solution for chlorinated water and other corrosive medias as well as other aqueous or hydrocarbon fluids. Wetted parts are CPVC with Hastelloy C-22 sensors. 316L stainless steel body, pigtail or M12 connectors are also ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
Each pump is fitted with a standard gearbox reduction system and with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.75 KW as the European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 pole and 1 phase voltages of 230/50-60 Hz or 110/60 Hz. As motors conform to UNEL-MEC specifications, there are many ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Rotary scum skimming troughs are the most economical method for removing all grease, scum, and other floating materials from the water surface in rectangular clarifiers. Scum troughs can rotate up to 75 degrees both forward and backward to accommodate changes in water level and collect surface material from either side of the trough. Slotted weirs are cut longitudinally along the top of the ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
MiniLab 53 is a basic on-site oil analysis lab for condition based maintenance for Industrial Machinery. Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With three simple test, the MiniLab 53 delivers comprehensive on-site ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Crisafulli Vertical Pumps are dependable, powerful, and versatile. They are designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks. Standard Duty Crisafulli vertical pumps are reliable, proven performers. They are equipped with grease lubricated, sealed bearings and are an ideal choice for moving relatively clean water. For ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 2315MP pump is designed with Cornell’s renowned quality and durability. It features a 2” discharge, 3” suction,and enclosed impeller. Cornell’s patented Cycloseal design is standard. Seal options in clude a double mechanical seal, packed gland, or Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4HH pump is designed with Cornell's renowned quality and durability. It features a 4" discharge, 6" suction, enclosed impeller, and flanged tangential double volute. Available in all-iron or bronze-fitted materials. Graphited acrylic packing is standard, with Cornell's patented CycloseaP available (with type 1 single mechanical seal). Optional motors include TEFC (other options ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Super pure, food grade oil. Lubricates rings, slides, pistons, seals, and other food equipment parts that may have incidental food contact. Provides a thin, water-resistant film. Contains no silicones or solvents - only food grade ingredients. NSF ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
Every pump is fitted with a standard gearbox reduction system and with vertical mounted B14 shaped electric motor in accordance with the UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.75 Kw a the at European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 poles and 1 phase voltages of 230/50-60Hz or 110/60Hz. As motors conform to UNEL-MEC specifications, there are many ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Clarifiers are called for wherever liquids have to be clarified or finest solids separated from a liquid, (2-phase Separators, Clarifiers). With product features optimally matched to the clarification process, Flottweg clarifiers also extract the rest of the solids from the liquid phase. The self-emptying 2-phase separators can be adapted to the product to be processed. Together with the ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Lubricated Rotary Vane Pump includes a 4-foot power cord and two kink-free hoses with non-reversible quick connects. The pump is mounted in an open, aluminum frame, which allows for easy access for service. The wick style lubricator requires less maintenance than other lubricator systems. All applicable components are rated 120V/60Hz or ...
-
PremiumManufactured by Monarch Instrumentbased in USA
The EXAMINER 1000 Vibration Meter is designed for ease of use in condition-based maintenance programs. It is the ideal tool to begin a predictive maintenance program or to add to an existing world-class maintenance program with FFT data collectors and analysis ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you