Marine Pollution (MARPOL) Equipment For Environmental Management Near Nunavut
-
Manufactured by Terragon Environmental Technologies Inc.based in CANADA
MAGS is now USDA approved by the Animal Plant and Health Inspection Agency (APHIS) as a new technology for handling regulated garbage in the United States. MAGS is also certified in compliance with IMO resolution MEPC.244(66) - replacing MEPC.76(40) - Standard Specifications of Shipboard Incinerators, and IMO MARPOL Annex VI. Until new regulation is adopted and ratified to properly class ...
-
Manufactured by Delitek ASbased in NORWAY
The DT-1500MC multi-fraction waste compactor model is manufactured in stainless steel and specially suited for use within marine environments. i.e. vessels and offshore ...
-
Manufactured by Delitek ASbased in NORWAY
The Containerized Waste Station has been developed and designed for the Marine and Offshore Industry. The CWS is a compact, flexible and mobile ...
-
Manufactured by Delitek ASbased in NORWAY
The DT-1000MC multi-fraction waste compactor model is manufactured in stainless steel and specially suited for use within marine environments. i.e. vessels and offshore ...
-
Manufactured by Delitek ASbased in NORWAY
The DT-220PN multi-fraction waste compactor model is manufactured in stainless steel and specially suited for use within marine environments. i.e. vessels and offshore ...
-
Manufactured by Delitek ASbased in NORWAY
The DT-500MC multi-fraction waste compactor model is manufactured in stainless steel and specially suited for use within marine environments. i.e. vessels and offshore ...
-
Manufactured by Delitek ASbased in NORWAY
Delitek AS has developed two different solutions in order to overcome typical problems with the wet waste from galley area. For vessels with small crew numbers, we have developed the FWS wet waste processing unit. This is a combination of a heavy duty food waste grinder and holding tank, in one compact unit. Still it is capable of dealing with the same problems the traditional bigger food waste ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ships. ...
-
Manufactured by Delitek ASbased in NORWAY
The DT-200MC multi-fraction waste compactor model is manufactured in stainless steel and specially suited for use within marine environments. i.e. vessels and offshore ...
-
Manufactured by JWC Environmentalbased in USA
The 3-SHRED and 3-SHRED-2 waste grinders quickly cut problem solids down to size. These industrial shredders have two rows of sharp, steel cutters that rotate slowly and with incredibly high torque to turn large troublesome solids into small ...
-
Manufactured by JWC Environmentalbased in USA
The 4-SHRED-2 waste grinder quickly cut problem solids down to size. This powerful industrial shredder has two rows of sharp, steel cutters that rotate slowly and with incredibly high torque to turn large troublesome solids into small ...
-
Manufactured by JWC Environmentalbased in USA
The 1-SHRED grinder is a compact shredder that is tough on solids. This small industrial shredder fits into areas with limited space requirements, while still providing the necessary power to cut down tough food waste, small bones, wood or even occasional flatware. Two shafts of hardened steel cutters rotate at slow speed and high-torque. They easily to grind solids waste into small particles. ...
-
Manufactured by CR Ocean Engineering LLCbased in USA
Exhaust Gas Scrubbers for MARPOL Compliance. Starting January, 1, 2015 the new MARPOL Annex VI regulations limit the level of fuel sulphur emissions to 0.10% m/m (from 1.00%) in Emission Control Areas in Norther Europe and the United ...
-
PremiumManufactured by Testo, Inc.based in USA
The flue gas analyzer testo 350 MARITIME can be used for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a trolley function – the testo 350 MARITIME flue gas ...
-
Manufactured by VAF Instrumentsbased in NETHERLANDS
For the continuous on-line monitoring of discharge water during de-ballasting operations, VAF Instruments is one of world's main suppliers. The Oilcon® Mark 6 Oil Discharge Monitoring & Control Systems are more reliable and more accurate than any other monitoring & control system. It is suitable for all ballast and slop water discharges and meets the bio fuel requirements MEPC 108(49) ...
-
Manufactured by Applied Rigaku Technologiesbased in USA
Rigaku NEX XT is the next generation process gauge for high-level total sulfur measurement (0.02% to 6% S) of crude, bunker fuel, fuel oils, and other highly viscous hydrocarbons, including residuums. This versatile, compact, and robust X-ray Transmission/Absorption (XRT/XRA) process gauge is specifically optimized for the total sulfur analysis needs of refineries, pipelines, blending operations, ...
-
Manufactured by Applied Rigaku Technologiesbased in USA
Regulations limiting the sulfur content of fuel used in the marine industry continue to evolve. New MARPOL regulations require the sulfur content of any fuel used onboard ships not to exceed 0.5 wt%. This threshold is a substantial reduction from the 3.5 wt% limit. As efforts continue to lower and reduce sulfur from marine fuels, Rigaku offers the NEX QC MFA (Marine Fuel Analyzer), delivering ...
-
Manufactured by Scanship ASbased in NORWAY
The international focus on discharging wastewater in coastal waters is increasing. New standards for discharge and various regulations are driving the maritime industries to process all wastewater onboard. To meet new demands and future requirements, Scanship offers a complete system for wastewater treatment, the Scanship AWP (advanced wastewater ...
-
Manufactured by Scanship ASbased in NORWAY
Scanship incinerators are designed in a multi-chamber configuration, semi-pyrolytic, having low flue gas emissions within IMO MARPOL regulations. The incinerators are also capable of meeting EU regulations, which is in accordance with the future general demands for air emissions. The automatic feeding technology is developed to secure a homogenous combustion and low dust emission. The solution is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you