MARPOL (Marine Waste) Equipment
-
ShowcaseManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
vessel owners in line with the latest legislation. The Energy Efficiency Design Index (EEDI) and the Ship Energy Efficiency Management Plan (SEEMP) requirements were made legally binding by the MARPOL Annex VI, the first climate change treaty to be adopted since the Kyoto Protocol. ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
We have developed a shaft power limitation (SHaPoLi) EEXI Shaft Power System, providing the necessary features and functionality to comply with the MARPOL Annex VI, MEPC.335(76) EEXI regulations. Our system uses a Shaft Power Acquisition Module to constantly display, monitor and record propulsion shaft power to ensure compliance with the ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
The Datum Hawk project, developed by Datum Electronics in partnership with Strathclyde University’s renowned Marine Engineering department, represents a change in the way that marine vessels will operate planned maintenance across engine rooms across engine rooms, helping improve vessel efficiency and optimisation. Datum Hawk empowers engineers to adopt condition-based maintenance ...
-
Manufactured by Applied Rigaku Technologiesbased in USA
Rigaku NEX XT is the next generation process gauge for high-level total sulfur measurement (0.02% to 6% S) of crude, bunker fuel, fuel oils, and other highly viscous hydrocarbons, including residuums. This versatile, compact, and robust X-ray Transmission/Absorption (XRT/XRA) process gauge is specifically optimized for the total sulfur analysis needs of refineries, pipelines, blending operations, ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ...
-
Manufactured by LABbased in FRANCE
A product line that offers solutions for the removal of nitrogen from ship engines, both low-speed and high-speed. According to the Marpol Annex VI regulations effective from 01.01.2016, depending on the speed of the drive units, only a limited NOx - content in g/kWh may be issued. This is valid both in the NECA zones (Tier III) and ...
-
Manufactured by CR Ocean Engineering LLCbased in USA
Exhaust Gas Scrubbers for MARPOL Compliance. Starting January, 1, 2015 the new MARPOL Annex VI regulations limit the level of fuel sulphur emissions to 0.10% m/m (from 1.00%) in Emission Control Areas in Norther Europe and the United ...
-
Manufactured by CM Technologies GmbHbased in GERMANY
The most common and cheapest way to get a representative sample is to use a drip sampler. Installation: The heavy oil sampler can be installed on any standard flange. MARPOL 73/78: Designed to comply with regulatory requirements in ...
-
Manufactured by JEITEKbased in SOUTH KOREA
compact and flexible installation. The food waste disposers meet the requirement of IMO MARPOL 73/78 ANNEX V for disposal of ground food waste into the open ...
-
Manufactured by LABbased in FRANCE
A product line that offers customized solutions for the desulfurization of marine propulsion systems that are operated with HFO. According to the Marpol Annex VI regulations in force since 01.01.2015 heavy oil may be used only with a maximum content of not more than 0.1% sulfur fuel. Alternatively, the use of an exhaust gas scrubber is ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ships. ...
-
Manufactured by JEITEKbased in SOUTH KOREA
compact and flexible installation, The food waste disposers meet the requirement of IMO MARPOL 73/78 ANNEX V for disposal of ground food waste into the open ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: Marine applications compliant to MARPOL standards. Representative continuous gas sampling in processes containing dust and humidity. Extractive gas analysis. Emission (CEMS) and process monitoring. Removal of dust from the sample ...
-
Manufactured by Applied Rigaku Technologiesbased in USA
Regulations limiting the sulfur content of fuel used in the marine industry continue to evolve. New MARPOL regulations require the sulfur content of any fuel used onboard ships not to exceed 0.5 wt%. This threshold is a substantial reduction from the 3.5 wt% limit. As efforts continue to lower and reduce sulfur from marine fuels, Rigaku ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
S-Keeper 7™ is in strictly compliance to the MARPOL Directive requirements but its Mission is even more important.Thank to our huge experience S-Keeper 7™ was engineered to be a smart hub able to aggregate several outputs from other companions offering an unique view of ship performance. ...
-
Manufactured by Scanship ASbased in NORWAY
Scanship incinerators are designed in a multi-chamber configuration, semi-pyrolytic, having low flue gas emissions within IMO MARPOL regulations. The incinerators are also capable of meeting EU regulations, which is in accordance with the future general demands for air emissions. The automatic feeding technology is developed to secure a ...
-
Manufactured by Terragon Environmental Technologies Inc.based in CANADA
MAGS is now USDA approved by the Animal Plant and Health Inspection Agency (APHIS) as a new technology for handling regulated garbage in the United States. MAGS is also certified in compliance with IMO resolution MEPC.244(66) - replacing MEPC.76(40) - Standard Specifications of Shipboard Incinerators, and IMO MARPOL Annex VI. Until ...
-
Manufactured by Ozzi Kleen | Neatport PTY LTDbased in AUSTRALIA
The Ocean Kleen Salt system is designed for the treatment of toilet waste (black water) with seawater flushing, and is able to provide a level of treatment far higher than the internationally accepted Marpol IV standard upon which the 'Grade A' classification is ...
-
by Jowa ABbased in SWEDEN
The requirements of the MARPOL Convention are that all oil tankers with a gross tonnage of 150 GRT and above must have an oil discharge monitoring and control system installed, incorporating an approved oil content meter, with a starting interlock and an automatic overboard valve control system. Oil Discharge Monitor consists of the following ...
-
Manufactured by JWC Environmentalbased in USA
MARPOL food waste disposal requirements. This small industrial shredder can also work well in testing labs destroying plastic and glass vials for used for specimen collection. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you