Marine Waste Services For Environmental Management Available In New Brunswick
-
Premiumby OHMSETTbased in USA
Controlling and collecting plastic waste from our waterways is an engineering challenge. It takes innovation to design a cleanup system that can collect, sort and compact the debris. At Ohmsett, our engineers are available to collaborate in the development of advanced technology to rid the waterways of ...
-
Manufactured by Céramiques Techniques Industrielles (CTI)based in FRANCE
Purify, recycle, refine: a whole technology at the service of your processes. For more than 20 years, CTI has been constantly expanding its expertise to design and supply increasingly high-performing ceramic Filtration membrane for processing and recycling aqueous complexes, in increasingly demanding ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
MRV is the acronym of Monitoring, Reporting & Verification and it became popular when the “Regulation (EU) 2015/757 of the European Parliament on the Monitoring, Reporting and Verification of Carbon Dioxide emissions from maritime transport” came into force last 1st July 2015. ...
-
based in USA
MER began its long legacy of performance-driven delivery of service in Environmental Services. Today our Environmental and Industrial Business Unit (EIBU) continues to deliver that same level of superior service, rooted in our culture of safety. Our expert staff, specialized equipment, and vast network of locations allow MER to continually meet the intense demands of industries all across North ...
-
Manufactured by Environmental Protection Engineering S.A. - EPE S.A.based in GREECE
Environmental Protection Engineering S.A. (EPE) collects and manages ship-generated solid waste and cargo residues, as described under Annexes I, II V & VI of the International Convention Marpol 73/78. Our experience in ship-generated waste management, along with the qualified and trained personnel, guarantee the quality of our services.Our company is fully licensed and implements the best ...
-
by Urbaser SAbased in SPAIN
The Works and Conservation Division specialises in designing, planning and constructing all types of works and infrastructures of an environmental nature and in waste management; they have more than 20 years’ experience in the sector.The wide range of activities ranges from urban and industrial waste removal and/or assessment, landscape restoration, parks and gardens, soil decontamination ...
-
based in USA
RPI’s broad natural resources expertise combined with a focus on quantitative analyses by highly experienced staff allow us to bring a unique and rigorous approach to environmental impact and assessment projects: Applied Environmental Toxicology. Contaminant Fate and Persistence Modeling. Non-Point Source Impairment Analysis and Remediation. Chronic and Emergency Marine Debris Mapping and ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
S-Keeper 7™ is a Continuous Emissions Monitoring System CEMS Type Approved for marine application fully engineered, integrated and validated in accordance with applicable Directives. What about the Main Players regulating Marine Emissions e.g. from ships or also from off-shore units? The most important player is definitely the IMO International Maritime Organization. The IMO is the United ...
-
Manufactured by CR Ocean Engineering LLCbased in USA
Our Marine Exhaust Gas Scrubbers meet our customer’s MARPOL compliance with state-of-the-art environmentally sound solutions, while offering maximum efficiency and design flexibility at the lowest possible costs. With over 60 years of proven experience, CR Engineers are ready to make all adaptations needed and provide on-going ...
-
by Boyer, Inc.based in USA
Boyer has one of the largest fleets of inland marine equipment in the country including: Sectional Barges (with or without Crane). Tugs, Jon Boats and Supply Boats. Hydraulic Barge Propulsion ...
-
by Clewat Oybased in FINLAND
A cleaning device developed by Clewat is one of the few concrete solutions to the marine plastic waste problem that works. The advantages of our devices are versatility, environmental friendliness and ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
Lamor Services provide integrated hazardous and non-hazardous waste management services to a range of oil and gas and other industrial clients. We follow the key principles of: Waste recovery, reuse and recycling; Long term sustainable solutions; Utilizing best available ...
-
based in UNITED KINGDOM
ITOPF regularly advises governments and industry on the preparation of contingency plans and other matters related to marine pollution. These activities give us an opportunity to pass on messages of good practice outside the pressurised environment of a spill. They also maintain our exposure to governments, organisations and systems that we might be working with in the ...
-
based in USA
Thousands of Tests Performed, Ultra-Low Emissions Measurement, On-Site Gaseous Emissions Results, On-Site Wet-Chemistry Results, Emission Factor Verification, Port Placement Procedures, Hazardous Waste Trial ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
S-Keeper 7™ Type Approved continuous emissions monitoring system is in compliance with several applicable directive such us Marpol, NOx Technical Code, as already explained. This compliance is proven since the constrains and guidelines were strictly followed during engineering and construction but using the NOx analytical method: our engineering team chose the method that uses the NDIR ...
-
by Ecoserv, LLCbased in USA
At our Super Dock at Port Fourchon, we offload waste products and clean storage containers and vessels to return them to service as quickly as possible. The 30-acre site, with 1,600 feet of water frontage, provides offloading of exploration and production waste materials and features traditional and automated cleaning of boats, barges and marine portable containers. This site also receives other ...
-
based in CANADA
Marine engine NOx certification surveys using IMO Marpol Annex VI protocols. International Dioxin/Furan/PCB emission surveys. Remote biomedical/refuse incinerator emission testing using Canada wide standard protocols for Dioxin and ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The establishment and provision of port waste management reception facilities is an integral part of any port authorities' compliance requirements, as governed by the International Convention for the Prevention of Pollution from Ships, 1973, MARPOL Convention. The key requirements are: The port authority shall ensure the availability of waste reception facilities adequate to meet the needs of ...
-
Manufactured by Plastic Advanced Recycling Corp (PARC)based in USA
PARC is well positioned in the technology of waste plastics recycling to confront the enormous challenges to the earth’s environment caused by the pollution of ocean garbage, landfill garbage, auto junk and medical waste, among others. In the United States, approximately 254 million tons of Municipal Solid Waste (MSW) were generated in 2007, a 9.53% increase compared to the 231.9 million ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
The S-Keeper 7™ is in strict compliance with the MARPOL Directive requirements but its Mission is even more important. Since 1974 TECNOVA Group has delivered thousands of devices, such as meters, oil in water analysers, viscometers, shaft monitoring etc., to improve the management of cruising ships, cargoes, chemical tankers, RO-ROs,etc. With the benefit of our extensive experience S-Keeper ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you