Environmental Management Equipment In South Africa
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The EcoMaster E 70Y Classic is suitable for high pressure works with up to 1000 bar and max. 17 l/min flow rate. The EcoMaster E 70Y Classic enables high cleaning efficiency in combination with material preservation. This makes it ideal for cleaning concrete molded parts, formworks, and steels as well as for surface preparation. Due to its compact and robust design, it is ideal for withstanding ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
High-efficiency compressor package (single-stage) with belt drive. Optionally with pre-inlet version for high negative pressure up to -850 mbar. Also suitable for suction/ pressure operation. Oil-free as per class 0 Extremely resilient, durable and lowmaintenance. ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The hot water cleaner EcoTherm is driving forward in the power range, which can only be achieved using bigger high pressure devices. Cleaning with hot water is often more effective than with cold water. This means that mostly low pressures are sufficient for comparable cleaning ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
Speedy is a pneumatically driven rotary transmission with integral compressed-air motor and can be used in a very wide range of applications. The high-pressure gun, Speedy and nozzle carrier head constitute a high-performance jetting tool that guarantees an extremely efficient area processing or surface cleaning due to the rotation of the nozzle carrier head. Speedy can be connected to all WOMA ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With ceramic measuring cell. Application area: From thread ½", hygienic connections, universal connection G1" for hygiene adapter, 4 ... 20 mA, three-wire: PNP/NPN, 4 ... 20 mA, IO-Link, Ex and hygiene approval, coloured 360° status display, on-site display and 3-button operation.VEGABAR 38 is a universal pressure transmitter with ceramic measuring cell for measuring gases, vapours and ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The HP 1500S-V-E-EXI high-pressure gun is suitable for spray work up to 1500 bar in potentially explosive atmospheres. The gun is fitted with a mechanical valve and an additional electrical switching contact. The high pressure operation of the appropriate device is switched on and off by an electrical switching contact. If the gun is not being actuated, the high-pressure hose is always ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
As well as the standard units, we design and produce individual high pressure water jetting systems in accordance with our customer needs. The configuration is flexible to respective ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 30 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 23 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The hot water cleaner EcoTherm is driving forward in the power range, which can only be achieved using bigger high pressure devices. Cleaning with hot water is often more effective than with cold water. This means that mostly low pressures are sufficient for comparable cleaning ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you