Only show results in Virginia? Ok

Safety Data equipment for Environmental Management

  • Premium

    Sauereisen - Model No. 14 - Thinning Liquid

    Sauereisen Thinning Liquid No. 14 is a soluble sodium silicate solution which is used to reduce the viscosity of various Sauereisen cements, permitting more flowable consistency for dip, spray or brush application.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Thinning Liquid Product line

  • Premium

    Sauereisen - Model 950S - Fluoropolymer Coating

    Sauereisen Fluoropolymer Coating 950S is a two-component liquid fluoroelastomer. It will withstand service temperatures up to 400ºF. Sauereisen No. 950-S offers excellent resistance to most acids, alkalies, and solvents common to industrial facilities.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Fluoropolymer Coating Product line

  • Premium

    Sauereisen - Model No. DW-30 - Electrical Cement

    Sauereisen Electrical Cement No. DW-30 is an inorganic, chemically-setting, magnesium oxide base material which develops a slight expansion while hardening into a porcelain-like body. Since Sauereisen No. DW-30 is dimensionally stable from -100oF to +900oF and will not corrode resistance wires at elevated temperatures, it is recommended for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electrical Cement Product line

  • Premium

    Sauereisen - Model No. 350 - Electric Refractory Cement

    Sauereisen Electric Refractory Cement No. 350 is a chemically-setting inorganic cement specified for high temperature bonding applications. The product is supplied as a two-component sodium silicate cement consisting of a Powder and Liquid which are mixed together as used. The excellent coating properties of Sauereisen No. 350 make it ideal for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electric Refractory Cement Product line

  • Premium

    Sauereisen - Model No. 360 - Heat-cured Refractory Coating

    Sauereisen Refractory Coating No. 360 is a heat-cured refractory coating for expendable thermocouple tubes and induction furnace linings. No. 360 exhibits excellent coating properties and may be applied by rolling, dipping or casting. No. 360 is also available in chemical-set formulation.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Heat-cured Refractory Coating Product line

  • Premium

    Sauereisen - Model No. 10 - Insultemp Cement

    Sauereisen Insultemp Cement No. 10 is primarily used where high electrical insulation and thermal conductivity are desired. No. 10 is a phosphate-bonded material that cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated as an alumina-filled cement, Insultemp Cement No. 10 is ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Insultemp Cement Product line

  • Premium

    Sauereisen - Model No. 29 - Low Expansion Cement

    Sauereisen Low Expansion Cement No. 29 is an inorganic cement used for embedding heating elements, insulating thermocouples, coating resistors and coils, and mechanically sealing parts where high resistance to electricity, chemicals and thermal shock is required. A strong resistance to cryogenic conditions makes No. 29 a common product for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Low Expansion Cement Product line

  • Premium

    Sauereisen - Model No. 78 - Electric Resistor Cement

    Sauereisen Electric Resistor Cement No. 78 is an ideal electrical refractory cement for coating resistors, coils, electric heating elements, furnaces, and embedding resistance wire. It replaces insulating varnish, enamel, mica, etc. The cement is also available in powder form known as Sauereisen Electric Resistor Cement No. P-78. When mixed with ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electric Resistor Cement Product line

  • Premium

    Sauereisen - Model No. 11 - Thermal Potting Cement

    Sauereisen Thermal Potting Cement No. 11 is primarily used where high electrical insulation and thermal conductivity are desired. No. 11 is a chemical-setting cement ideal for potting applications subject to high temperature and thermal shock. Thermal Potting Cement No. 11 is formulated to be compatible with most metal alloys that it may contact. ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Thermal Potting Cement Product line

  • Premium

    Sauereisen - Model No. 33S - Sealing Cement

    Sauereisen Sealing Cement No. 33S is a chemical-setting, inorganic, silicate-base cement that is used for assembly/sealing applications common to electrical equipment. It is ideal for coating molds and forms used to produce special shapes and patterns. No. 33S is supplied in powder form and need only be mixed with water to apply.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Sealing Cement Product line

  • Premium

    Sauereisen - Model No. 220 & 221 - Epoxy Joint Sealants

    Sauereisen Epoxy Joint Sealants are used to provide a durable joint filler. The materials are 100% solids, pourable epoxies designed to effectively absorb the shock and impact of heavy loads and steel-wheeled vehicles over narrow joints. Available in two formulations, No. 220 is for general purpose applications and No. 221 is a NovolaK epoxy for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Epoxy Joint Sealants Product line

  • Premium

    Sauereisen - Model No. 75 - Electrical Refractory Cement

    Sauereisen Electrical Refractory Cement No. 75 is a castable, hydraulically-setting cement used as a bonding mortar or refractory coating for high-temperature assembling, encapsulating and potting applications. No. 75 may also be cast or gunite applied to protect concrete from thermal shock.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electrical Refractory Cement Product line

  • Premium

    AMSA - Model DTEA II SR - Slow Release Tablets

    DTEA II SR is a solid, slow release form of DTEA II, an organic deposit penetrant, dispersant, and remover, and corrosion inhibitor. It is intended for use in small to medium circulating water systems, such as cooling towers. One tablet lasts 2 - 3 weeks depending on system temperature, and water flow conditions. This convenient tablet form ...

    By AMSA, Inc. based in Auburn, MICHIGAN (USA). from Slow Release Tablets Product line

  • Premium

    Sauereisen - Model No. 31 - White and Porcelain-like Cement

    Sauereisen Cement No. 31 is a white, porcelain-like cement that is widely used throughout industry in a variety of applications including assembling, sealing, insulating and cementing of ceramics, porcelain, metal, and glass.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from White and Porcelain-like Cement Product line

  • Premium

    Sauereisen - Model No. 7 - Insa-Lute Hi Temp Cement

    Sauereisen Insa-Lute Hi Temp Cement No. 7 is a sodium silicate adhesive cement used by leading electrical manufacturers. The cement exhibits outstanding resistance to heat and electricity. Typical applications include instrumentation assembly, coating and embedding of resistance wires, and high-temperature insulation

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Insa-Lute Hi Temp Cement Product line

  • Premium

    Sauereisen - Model No. 6 - Electric Heater Cement

    Sauereisen Electric Heater Cement No. 6 is a versatile high-temperature cement used for refractory coatings, lining furnaces, embedding electric heating elements, coating resistors, molding and insulating. No. 6 is supplied in Powder form and needs only be mixed with water to apply.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electric Heater Cement Product line

  • Premium

    Sauereisen - Model No. 8 - Electrotemp Cement

    Sauereisen Electrotemp Cement No. 8 is primarily used where high electrical insulation and thermal conductivity are desired. No. 8 cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated with a zircon base, the cement is non-corrosive and compatible for applications with ceramics, ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Electrotemp Cement Product line

  • Premium

    Sauereisen - Model No. 89 - High Temperature Membrane

    Sauereisen High Temperature Membrane No. 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to acids, ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from High Temperature Membrane Product line

  • Premium

    Sauereisen TempSeal - Model No. 3 - Adhesive Cement

    Sauereisen TempSeal Cement No. 3 is an inorganic adhesive paste offering high temperature resistance combined with with a sealing capability superior to other refractories. TempSeal Cement No. 3 overcomes the inherent permeability of ceramic materials by permitting only a remarkably low level of absorption. Common uses of No. 3 include the ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Adhesive Cement Product line

  • Premium

    Sauereisen - Model No. 4 - Flotemp Cement

    Sauereisen Flotemp Cement No. 4 is used for potting applications where high electrical insulation and thermal conductivity are required. No. 4 is specially formulated to limit the wicking nature of a porous substrate. This will prevent permeation of water into the substrate and the associated volume loss or cavitation of the cement. The need for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Flotemp Cement Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you