Safety Data Equipment Available In Kuwait
-
PremiumManufactured by CO2Meter, Inc.based in USA
The SAN-10 Personal 5% CO2 Safety Monitor and Data Logger is designed for employees who work in enclosed areas where carbon dioxide buildup may cause personal harm. This device features exclusive data logging capabilities and the data log files can be downloaded as csv./xls. files then displayed via our GasLab ...
-
based in USA
All potentially hazardous materials entering a laboratory have a Material Safety Data Sheet (MSDS). But to make good use of the information on an MSDS, employees need to understand how it is organized and what it contains. This training program reviews the various sections of the MSDS, what information can be found in each section and ...
-
based in USA
Educates employees about the ANSI MSDS format and reviews how the information in an MSDS can help them work safely with potentially hazardous chemicals. Covers the four basic questions the MSDS should ...
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
The mobile METPOINT BDL portable data logger enables rapid and simple measurement data recording and evaluation of the compressed air quality directly on site. It is a universally implementable hand-held measuring device with an integrated data logger for recording measurement data such as e.g. consumer and through flow ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Volume flow rate, pressure dew point, pressure, current efficiency, temperature and residual oil vapour content monitoring with just one measuring device. The METPOINT BDL und BDL compact is an innovative electronic screen writer for recording critical process parameters for e.g. compressed air and gas applications. The electronic recording system measures connected input signals and subsequently ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Alpha-Modular-System for large blowers for process air applications. 104 model variants with low pulsation, reduced piping noise, integrated sound reduction measures and fully integrated oil system in the stage. 2-/3-lobe blower stage with direct or belt drive in a modular ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
for 3000 m working depth (higher depths possible), powerful hydraulic by truck engine via Allison transmission 4700 OFS, mast with automatic lock in end position (retracted and extended) and API 4F monogram, electric safety according to EN 60204, automatically uplifting working platform while mast telescoping, stairs foldable for transport, store ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen TempSeal Cement No. 3 is an inorganic adhesive paste offering high temperature resistance combined with with a sealing capability superior to other refractories. TempSeal Cement No. 3 overcomes the inherent permeability of ceramic materials by permitting only a remarkably low level of absorption. Common uses of No. 3 include the assembly of heating elements, resistors and other ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Flotemp Cement No. 4 is used for potting applications where high electrical insulation and thermal conductivity are required. No. 4 is specially formulated to limit the wicking nature of a porous substrate. This will prevent permeation of water into the substrate and the associated volume loss or cavitation of the cement. The need for double filling of ceramic units may be ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Low Expansion Cement No. 29 is an inorganic cement used for embedding heating elements, insulating thermocouples, coating resistors and coils, and mechanically sealing parts where high resistance to electricity, chemicals and thermal shock is required. A strong resistance to cryogenic conditions makes No. 29 a common product for aerospace applications. No. 29 adheres to glass, ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Principles of Operation. The oil mist media is stored in the OMG in a heated pressure tank, the temperature of which can be controlled to ensure a consistent and appropriate oil viscosity. Temperature control of the reservoir is via it's own PID microprocessor controller, allowing independent control from ambient to 70°C. The heat exchanger within the OMG is controlled by a second ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Sealing Cement No. 33S is a chemical-setting, inorganic, silicate-base cement that is used for assembly/sealing applications common to electrical equipment. It is ideal for coating molds and forms used to produce special shapes and patterns. No. 33S is supplied in powder form and need only be mixed with water to ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoCrete - Fast Patch No. 149 is a three-component, fast setting epoxy monolithic that is designed for patching cracks and holes. This material is ideal for use on highways, bridge decks, docks, ramps, traffic aisles, industrial floors and airport runways. Fast Patch No. 149 produces extremely high strengths and takes an initial cure in just two ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy Joint Sealants are used to provide a durable joint filler. The materials are 100% solids, pourable epoxies designed to effectively absorb the shock and impact of heavy loads and steel-wheeled vehicles over narrow joints. Available in two formulations, No. 220 is for general purpose applications and No. 221 is a NovolaK epoxy for more severe chemical environments. Sauereisen Joint ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels. The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
The BWB XP PLUS was designed around the BWB-XP providing enhanced functions to give more utility while maintaining the unsurpassed levels of accuracy, usability and reliability while signi?cantly reducing analysis time. Our customers do not need to waste valuable time changing ?lters and re-calibrating when a different measurement is required, as is a common requirement in all other Flame ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Thinning Liquid No. 14 is a soluble sodium silicate solution which is used to reduce the viscosity of various Sauereisen cements, permitting more flowable consistency for dip, spray or brush ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Purpose Built Flame Photometer with specialised software, firmware and hardware. The BWB BIO AV is an offshoot of the popular BWB BIO. A simplified menu structure and enhanced Li detection make it a welcome addition to the BWB family. The ability to calibrate and measure Sodium, Potassium, and Lithium at the same time with the same dilution (from 1:6 to 1:100) streamlines throughput in many ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you