Applications
-
Premium
Odour nuisance assessment for industrial facilities
Assessment of odour impacts from industrial facilities is increasingly required for planning and IPPC/EPR permitting. CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies. In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to ...
By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.
-
Premium
Ozone generators for health application
Ozone therapy was found to be efficient, easy to use, ensuring good tolerance and no sideeffects. According to the chosen therapeutic concentration ozone can produce its immune-modulating, anti-inflammatory, bactericidal, virucidal, fungicidal, analgesic and other ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Emission control solutions for general dedusting sector
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Gas monitoring instruments and systems for compressed breathing air
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for fumigation
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for anesthetic gases
The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Industrial hygiene - personnel safety gas analyzers for industrial air monitoring
Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Air sampling & monitoring systems for fire & police service
Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Cleanroom Solutions from Concept Smoke Systems
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
waste water treatment using flotation, fat removal, sludge dewatering
We have expierence in poultry indsutry waste water treatment, sludge dewatering, fat prevention in pipes. ...
By Ekotakas UAB based in Kaunas, LITHUANIA.
-
VOC control for mission critical facilities
VOC control for mission critical ...
By Catalytic Combustion Corporation (CCC) based in Bloomer, WISCONSIN (USA).
-
Monitoring, reporting & control solutions for security sector
Monitoring, reporting & control solutions for security ...
By Guardian Telecom Ltd. based in Calgary, ALBERTA (CANADA).
-
Environmental management solutions for health, safety and well-being industry
Prioritizing people - embed well-being, inspire trust, and ensure your ...
By BSI Consulting based in Herndon, VIRGINIA (USA).
-
Rugged Mobile Technology for Public Safety
Public safety workers broke ground long ago on getting computers out in the field. Vehicle-mounted notebooks are an expected part of a police vehicle nowadays. But that innovation continues with rugged PDAs for tracking patient data, rugged tablets for navigating unfamiliar routes and pre-planning for fire departments. Whether it’s for fire, police, EMS or other areas of public safety, we can provide you with form factors and features for top ...
By Handheld Group AB based in Lidköping, SWEDEN.
-
Environmental, health and safety solutions for lead safety industry
This booklet provides construction workers with guidance regarding The Lead Exposure Lead Safety Coverin Construction standard (29 CFR 1926.62) issued by the Occupational Safety and Health Administration (OSHA). The standard requires that employers in the construction industry protect workers from excess exposure to lead. This easy to follow booklet contains general information, detailed training guidelines, complete regulatory citations, a self test and helpful safety tips for construction workers that may ...
By Comprehensive Safety Compliance, Inc. (CSC) based in Pittsburgh, PENNSYLVANIA (USA).
-
Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler
Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in air. ...
By Sigma-Aldrich based in Bellefonte, PENNSYLVANIA (USA).
-
Workplace noise
Verification of compliance with the maximum permissible exposure levels through measurements or calculations. Designation of noise zones and noise optimisation of ...
By SoundPLAN GmbH based in Backnang, GERMANY.
-
Autonomous UV-C Disinfection Robot for Industry
Infection and outbreak control are significant and increasing problems globally. It can cause sick leaves and furthermore, infections and outbreaks generate a massive financial ...
By UVD Robots, PART OF BLUE OCEAN ROBOTICS based in Odense, DENMARK.
-
Gas chromatography solutions for public health & environmental management sector
Having direct analysis of air quality is mandatory. Our products can be put next to hazardous area for online monitoring and direct ...
By APIX Analytics based in Grenoble, FRANCE.
-
Infrared sources for industrial and safety sector
Axetris infrared sources are used in a variety of industrial applications: Combustible and Toxic Gas Detection, Refrigerant Monitoring, SF6 Monitoring, Fruit Ripening Monitoring, Flame Detection, Liquid Analysis using Attenuated Total Reflection ATR, Semiconductor ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you