Waste Tracking Equipment For Environmental Management Near Tuvalu
-
Manufactured by Acoem Australasiabased in AUSTRALIA
An innovative approach to fighting traffic noise pollution. Road and traffic noise generated by vehicles is the number one source of unwanted noise exposure that communities face on a daily basis, especially in urban environments. Excessive and repeated noise, emitted from car or truck brakes, tyres, acceleration, loud engines or modified exhaust pipes has, until now, been difficult to police as ...
-
Manufactured by MiX Telematicsbased in USA
The Federal Motor Carrier Safety Administration (FMCSA) has announced the final Hours of Service (HOS) rule that will require commercial motor vehicle drivers to track their Record of Duty Status (RODS) electronically, using compliant Electronic Logging Devices (ELD) versus paper logbooks. Regardless of whether your driver already log their Hours of Service electronically or not, this ELD Mandate ...
-
Manufactured by Schramm, Inc.based in USA
Water Well - Environmental - Geothermal - Exploration Blast Hole & Mining - Shallow Oil. The Schramm T685WS is a world proven, heavy duty, heavy hoist, truck mounted mounted drill rig. Separate drill rig subframe design permits stable mounting on standard trucks, the Schramm tracked drill carrier, trailers and special purpose vehicles of other manufacture. High capacity single reduction top ...
-
Manufactured by Schramm, Inc.based in USA
Water Well - Environmental - Geothermal - Exploration & Mining. The T450WS is a compact, maneuverable truck mounted drill rig with a large volume, high pressure air compressor. A deck mounted diesel engine provides reliable power for all hydraulic and air systems. Separate drill rig subframe design permits stable mounting on standard trucks, the Schramm tracked drill carrier and trailers. ...
-
Manufactured by Schramm, Inc.based in USA
The T685EX is the drilling contractor’s rig of choice for reverse circulation mineral exploration applications where big air is required in a highly mobile, heavy duty package. A sliding angle mast and a variety of RC accessories, combined with track or truck mounting offer site specific equipment solutions for almost any application. Automated pipe handling systems are also available to ...
-
Manufactured by TrackGripbased in NEW ZEALAND
Rubber Tracks are manufactured to suit the machine. We custom make for every make and model of tracked vehicle to improve traction and stability. Keeps you productive and working safely on challenging ...
-
Manufactured by New Waste Concepts, Incbased in USA
The CAPS new, patent pending, tracked application vehicle saves labor, time, maintenance and fuel in doing the daily application of cover material or hydroseeding. The CAPS P series has a unique business model which requires no CAPEX ...
-
by Thinxtrabased in AUSTRALIA
Oyster 2 is an ultra-rugged, long-life battery-powered GPS tracking device with up to 7 years battery life for small to medium size asset tracking and more. This solution is ideal for industrial container tracking, trailer tracking and more! Get in touch with our friendly team to find the right monitoring device for your ...
-
Manufactured by Micromax Technologybased in AUSTRALIA
Micromax Technology is a leading Australian supplier of embedded ruggedised computers providing excellent computing performance and outstanding power conservation. These embedded rugged computers are made to withstand harsh conditions such as strong vibrations, dust, moisture and extreme ...
-
Manufactured by Davimacbased in AUSTRALIA
Eliminate delays and stay on schedule with the first Australian designed and built Track Chaser Bin with a unique cushion hitch. With ultimate flotation, especially in light sandy country and a heavy duty design with a massive 55 tonne handling capability, Davimac track chaser bins can help you keep on harvesting. ...
-
Manufactured by Martin Stolze b.v.based in NETHERLANDS
Drills and pot holders are available in nearly any size. Drill plates and container distribution forks can be supplied as well, just like the necessary compressor and electricity cables. Any other special requirements can be produced at the well-equipped facility of Martin Stolze ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
Brine tank capacity from 500 l up to 2,100 l. The city sprayers of the Husky L range have an optimised container design which makes them ideal for mounting on a wide variety of municipal carrier vehicles. The Husky L range of spraying units are intended purely for spreading brine. The brine tank is made of HD-PE (High Density PolyEthylene) with a wall thickness of 10 mm. The brine is precisely ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
The pioneering spreader built around the customer needs. Automatic spreader for heavy trucks, from 4m3 to 16 m3. UniQa represents the experience of 60 years of innovation in winter maintenance and it aim to offer the best possible operative conditions for each customer specific requirements. UniQa incorporates all the characteristics a winter maintenance spreader require such as consistency and ...
-
Manufactured by LeanPath, Inc.based in USA
The LeanPath 360 Food Waste Prevention System is the most complete, automated solution for high-volume operations. ...
-
Manufactured by EmiControlsbased in ITALY
The TAF35 is a versatile tracked vehicle designed for firefighting. The extinguishing turbine has been mounted on a compact crawler vehicle. The turbine is fitted with a nozzle ring which atomizes water and extinguishing foam to form fine particulate matter. This water or water/foam particulate matter is distributed by a propeller. The spray action is variable, ranging from a mist which spreads ...
-
Manufactured by Castolin Eutectic GmbHbased in GERMANY
Manual electrode for intermediate layers and rebuilding 13% manganese steel, alloy steels and hardenable steels, plus anti-wear protective coating of gears, drive sprockets, tracked vehicle wheels and return rollers, rails and rail points, armour plate, gyratory crusher cones and ...
-
Manufactured by Castolin Eutectic GmbHbased in GERMANY
Continuous electrode without shielding gas, for rebuilding and anti-wear coating of large parts, including guide rollers and running-gear components on tracked ...
-
Manufactured by McElroy Manufacturingbased in USA
McElroy’s No.618 line of fusion machines will butt fuse pipe sizes from 6” IPS to 18” OD (180mm to 450mm). They come in multiple model configurations to meet the demands of your pipeline project. One of our best sellers the No.618 bridges the gap between small and large diameter pipe fusion. The TracStar No.618 offers a self-contained, self propelled track mounted vehicle that can handle grades ...
-
Manufactured by McElroy Manufacturingbased in USA
The McElroy 250 will butt fuse pipe sizes from 63mm to 250mm (2” IPS to 8” DIPS). They are designed in response to international metric pipe needs. The 250 fusion machines now come in multiple model configurations to assure your metric pipe fusion needs are covered. The Rolling 250 is based on the No.28 which has been the industry standard for over 30 years. The TracStar 250 offers a ...
-
Manufactured by McElroy Manufacturingbased in USA
McElroy’s TracStar 500 will butt fuse pipe sizes from 6” IPS to 20” OD (180mm to 500mm). It was the first fusion machine in the world to be mounted on a track system making it mobile in almost any terrain. Considered the Flagship of McElroy machines, its success spawned the entire TracStar line of fusion equipment. It incorporates the interchangeable 500 carriage with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you