training course Events

  • Aermod Training Courses - Dallas, TX

    Lakes Environmental has offered training in air dispersion modeling worldwide since 1998. Our classes not only emphasize the importance of AERMOD’s theoretical application, but also its practical hands-on functionality. Lakes Environmental believes that the best way to learn new software is to learn it first hand. That is why every course attendee is trained by our experts, in a smaller ...


    DALLAS

  • Calpuff Training Courses - Dallas, TX

    Day 1: Introductions. Dispersion, stability class, andmixing height. Puff versus Plume models. Terrain and land use preprocessing (GEO.DAT). Met station data preprocessing & WRF/MM5 met data. Hands-on CALMET. Wind Field QA - how to read/modify a wind field. Basic parameters for a CALPUFF run. CALPOST post-processing options. Hands-on CALPUFF and CALPOST modeling. ...


    DALLAS

  • 4-day Comprehensive GC-MS Training (Agilent SQ MS with MSD Chemstation) Jan18

    The four-day Comprehensive GC-MS Training course introduces the fundamental theory of quadrupole GC-MS along with the operation, maintenance and troubleshooting of the Agilent single quadropole MSD using MSD Chemstation software. This course includes an introduction to quadrupole mass spectrometry; hardware configuration; MS tuning; data acquisition in scan and selected ion monitoring (SIM) ...


    MILTON KEYNES

  • Identification of Wetland Plants in Winter

    Wetland plants, also known as hydrophytes or hydrophytic vegetation, have adaptations that enable them to grow and reproduce with their roots in water or saturated soil for at least part of the year. In contrast, plants that cannot survive in saturated conditions are commonly referred to as upland plants. Along with hydric soils and hydrology, the presence of wetland plants is one of the primary ...


    BASKING RIDGE

  • 5-day Complete GC & GC-MS (ELY)

    Course accreditation This course has been approved by the Royal Society of Chemistry for purposes of Continuing Professional Development (CPD). What will you learn on this course? The 5-day Complete GC & GC-MS course is built from the 3-day Practical Essentials of GC & GC-MS and the 2-day GC & GC-MS Clinic courses to provide a complete training solution enabling you to understand your Gas ...


    ELY

  • Forum on Environmental Accreditation 2018

    The 2018 Forum on Environmental Accreditation will be held at the Hyatt Regency in Albuquerque, NM, January 22-25, 2018. Some of the highlights for the week include: Meetings of TNI Committees to further TNI efforts on environmental laboratory accreditation, proficiency testing, and accreditation of field sampling and measurement organizations; An exhibit program showcasing the latest innovations ...


    ALBUQUERQUE

  • 4-day Comprehensive GC Training (Shimadzu GC with GCsolution) Feb18

    This course includes an introduction to gas chromatography, GCsolution configuration, an introduction to GCsolution, data acquisition and data analysis. It will discuss gas supply and handling; split/splitless and PTV inlets; capillary columns; detectors (FID and ECD); the autosampler; PC & data system; creating methods; integration and reporting; quantitation and calibrations; and sequences. ...


    MILTON KEYNES

  • Aermod Training Courses - Toronto, ON

    Lakes Environmental has offered training in air dispersion modeling worldwide since 1998. Our classes not only emphasize the importance of AERMOD’s theoretical application, but also its practical hands-on functionality. Lakes Environmental believes that the best way to learn new software is to learn it first hand. That is why every course attendee is trained by our experts, in a smaller ...


    TORONTO

  • Calpuff Training Courses - Toronto, ON

    Day 1: Introductions. Dispersion, stability class, andmixing height. Puff versus Plume models. Terrain and land use preprocessing (GEO.DAT). Met station data preprocessing & WRF/MM5 met data. Hands-on CALMET. Wind Field QA - how to read/modify a wind field. Basic parameters for a CALPUFF run. CALPOST post-processing options. Hands-on CALPUFF and CALPOST modeling. ...


    TORONTO

  • 2 Day Seminar - GMP for Quality Control Laboratories and FDA Audit Preparation by Compliance Trainings

    You will gather a thorough awareness of latest trends and updates with respect to USFDA, EU, WHO and PIC/S (Pharmaceutical Inspection Co-operation Scheme) and Indian GLP Schedule L1 compliance and guideline requirements. This course will also provide examples to develop inspection ready documentation. On completion of this course, the participants shall be well versed with the global Quality ...


    HYDERABAD

  • 4-day Comprehensive GC-MS Training (Varian/Bruker Ion Trap with MSWorkstation)

    The four-day Comprehensive GC-MS Training course introduces the fundamental theory of ion trap GC-MS along with the operation, maintenance and troubleshooting of the Varian Saturn 2200 ion trap using MSWorkstation software. This course includes an introduction to ion trap mass spectrometry; hardware configuration; MS tuning; data acquisition in scan and MS/MS modes; qualitative & quantitative ...


    MILTON KEYNES

  • 5-day Comprehensive GC-MS Training (Agilent SQ MS with MassHunter)

    This 5 day course includes an introduction to quadrupole mass spectrometry; hardware configuration; MS tuning; data acquisition in scan and selected ion monitoring (SIM) modes; qualitative & quantitative data analysis; reports; sequencing; and an introduction to deconvolution and retention time locking. The course will train the operator to perform the maintenance required to ensure the smooth ...


    MILTON KEYNES

  • Environmental Engineering for Developing Countries 2018

    The course centres on addressing water and sanitation needs in developing countries, covering low cost engineering technologies as well as the crucially related social, economic, commercial and institutional issues, which are often not covered in traditional engineering training. In addition to formal lectures, guest speakers share their experience of the issues involved in working in developing ...


    NEWCASTLE UPON TYNE

  • 5-day Hands-on Sample Preparation

    This course has been approved by the Royal Society of Chemistry for purposes of Continuing Professional Development (CPD). The Hands-On Sample Preparation course combines the 5 individual hands-on sample preparation days covering Headspace, Solid-Phase Micro-Extraction (SPME), Thermal Desorption (TD), Pyrolysis and Purge-and-Trap (P&T). These courses will teach you the theory for each sample ...


    MILTON KEYNES

  • 29th GLOBALCON 2018 - Energy, Power and Facility Management Strategies and Technologies

    GLOBALCON 2018, presented by the Association of Energy Engineers, is designed specifically to facilitate those seeking to expand their knowledge of fast-moving developments in the energy field, explore promising new technologies, compare energy supply options, and learn about innovative and cost-conscious project implementation ...


    BOSTON

  • Facility Decommissioning Training Course - March 2018

    Covers entire spectrum for nuclear facility decommissioning - from final facility shutdown through site ...


    LAS VEGAS, NV

  • 4-day Comprehensive GC Training (Thermo TRACE GC with Xcalibur)

    The 4-day Comprehensive GC Training course introduces the fundamental theory of GC along with the operation, maintenance and troubleshooting of the Thermo TRACE Gas Chromatograph using Xcalibur software. This course is primarily for analysts and technicians responsible for the operation, maintenance and troubleshooting of Thermo gas chromatographs. It combines a mixture of classroom based ...


    MILTON KEYNES

  • 4C Environmental Conference 2018

    4C’s mission is based on the core belief that involvement is key for compliance professionals. We believe when people come together to connect, they influence change that betters environmental practices of the entire community. The 4C mission is to provide an environment where compliance professionals come together to collaborate and ...


    SAN ANTONIO

  • Analytica 2018

    International Trade Fair for Laboratory Technology, Analysis, Biotechnology and analytica Conference. Analytica is the leading international fair for state-of-the-art laboratory technology and pioneering biotechnology. No other trade fair in the world covers the range of subjects to do with the laboratory in industry and science in such breadth and depth, and on such a scale. The selection of ...


    MUNICH

  • Aermod Training Courses - Cancun, Mexico

    Lakes Environmental has offered training in air dispersion modeling worldwide since 1998. Our classes not only emphasize the importance of AERMOD’s theoretical application, but also its practical hands-on functionality. Lakes Environmental believes that the best way to learn new software is to learn it first hand. That is why every course attendee is trained by our experts, in a smaller ...


    CANCUN

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you