Acid Waste Equipment For Health And Safety
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Elastomeric Joint Compound No. 69 is used as a flexible expansion joint in acid pickling tanks; in concrete, brick and tile floors; for sealing joints of ducts and conduits; and for general caulking and sealing where permanent flexibility and adhesion are required, along with resistance to mineral acids and alkalies. No. 69 is not resistant to oils, kerosene or petroleum ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, fully PE or PTFE insulated. Application area: For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup. The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
AnoPur is a version of Eco-Tec’s Acid Purification System specifically adapted for purification of sulfuric acid used in aluminum anodizing. Hundreds of AnoPur units are in operation in anodizing facilities around the world. AnoPur is used to continuously remove dissolved aluminum from sulfuric acid anodizing baths in order to maintain the dissolved aluminum at a consistently low ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec’s Nickel Recovery System, NickelPur ensures maximum nickel salt recovery, cost reduction, and quality consistency. NickelPur utilizes Recoflo, the next generation of ion-exchange technology with compressed-bed, counter-current operation recovering over 95% of nickel dragged out from the plating baths into the rinses. “Nickel drag-out” is a normal operational occurrence ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec has a range of products that have been developed specifically for treating acid baths used in the production of electrochemically etched aluminum capacitor foils and electrochemically grained aluminum lithographic printing plates. Leading manufacturers of capacitor foils and lithographic printing plates rely on Eco-Tec systems to maintain production quality and efficiency while reducing ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The MicroPur unit is based off the APU system and designed for small to medium-sized steel pickling operations. The system eliminates the need for bath dumping by removing metals as they dissolve into pickling acids, greatly reducing acid and waste treatment costs. Pickling performance is assured through consistent bath chemistry and product quality is ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
MicroPur recovers acid using the APU to improve steel quality and consistency. The most widely used acid recycling system in the world, the Eco-Tec Acid Purification Unit, APU, eliminates bath dumping by removing metals as they dissolve into stainless steel and carbon steel pickling acids and . Since 30% – 70% of original acid is lost in bath dumping before being used, the APU dramatically ...
-
PremiumManufactured by ODLABbased in SOUTH KOREA
This Acid Purification System is a product used to purify acids and some organic solvents by the subboiling method. It is a metal-free product using high-purity quartz tubes. The PTFE support and the regulator parts inside the PVC are protected from corrosion even when exposed to acid fumes. The heater system uses two 500W quartz heaters to purify nitric acid, hydrochloric acid, etc., and is ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
GAP removes contaminants from Kraft process liquors while recovering valuable acid. Throughout the Pulp & Paper industry, chlorine dioxide (ClO2) is used in the pulp-bleaching process. ClO2 generators chemically convert sodium chlorate to chlorine dioxide and sodium sulfate in a strong solution of sulfuric acid. The acid is continuously purged from the generator in order to prevent the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Electrolyte from the Copper Liberator cells is directed to the Spectrum Filter to remove suspended solids by an automated, back washable filter with a permanent media. The filtered solution then flows through an Acid Purification system which consists of a proprietary ion exchange resin column where the electrolyte solution (sulphuric acid) is separated from the metal salts by the resin. A ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, plastic housing IP66/IP67, type 4X, display. Application area: 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval, on-site display and 3-button operation. VEGAPULS 31 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
QPump, Vulcan peristaltic pump acid resistant Waste Rinse and Diluent ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, plastic housing IP66/IP67, Type 4X. Application area: 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval. VEGAPULS 21 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For simple measuring tasks, plastic housing IP66/IP67, Type 4X. Application area: 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm. VEGAPULS 11 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all industrial areas, or ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Transformative Solutions for Battery Material Production. Proven, Innovative, and Unique Solutions: Koch Separation Solutions (KSS) is transforming the landscape of separations by leveraging synergistic technology such as membrane filtration, ion exchange, evaporators, and dryers. Our solutions are tailored to improve product quality, increase process efficiency, and drive down costs in dairy, ...
-
PremiumManufactured by ODLABbased in SOUTH KOREA
How to clean vessels: Fill Teflon Bath with acid solution at the rate of distilled water 8: HN03 2 to submerge vessels. Start to heat up alter setting temperature at 180?~200? of Controller. Maintain heating for more than 5 hours to clean. After heating, cleansing solution and vessels make be cooled and disassemble Collection tube and then drain trapped solution in the Collection tube. Open the ...
-
PremiumManufactured by ENVICON GmbHbased in GERMANY
ENVICON Formic Acid Dosing Stations are used to clean and regenerate the ENVICON Aerators, Types EKR/EKS and EMR/EMS with 85% formic acid. The wastewater constituents cause organic and inorganic deposits to form on the ceramic components and as well as on the membranes and in the slits of these, which increase the loss in operating pressure and reduce oxygen input. As a result, the operating ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Leachate is a product derived from the anaerobic transformation of the organic substances present in the waste. It is a liquid with different levels of pollutants present, the form and quantity of which will depend on factors such as the type of landfill, and the quantity of rainwater which filters through the landfill, mixing with the humidity of the waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you