Acoustic Emissions Equipment For Health And Safety Available In Kazakhstan
-
Manufactured by Senseven GmbHbased in AUSTRIA
Leaking valves were yesterday: 5-10% of valves in industries are leaking ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
The own developed STDS-Jantz drilling rig Premodrill 50 sets new dimensions to the well drilling industry. Premodrill 50 convinces with its simple operation via a remote control panel for driving , all drilling functions and also winch, mud pump and hydraulic casing extraction ...
-
Manufactured by CAMS srlbased in ITALY
Mobile and transportable plant for secondary crushing and recycling of aggregates, rubble and other waste materials. Secondary crushing at low rpm allows to obtain a homogeneous grinding curves without filler production. UCM range operates in hybrid mode (diesel/electric). UCS range is fully ...
-
Manufactured by Stable Micro Systems Ltdbased in UNITED KINGDOM
When you bite into an apple, a sharp, crisp crunch tells you it's fresh. Without such a characteristic sound the apple would be less appealing. The science of sound emission is called acoustics and its analysis gives you vital information on the quality and acceptability of the food; both actual and perceived. In response to requests from both university and commercial research departments, ...
-
Manufactured by EnergyLink Internationalbased in CANADA
Agencies governing industrial noise compliance have developed increased regulations for power plant performance. EnergyLink International’s gas turbine exhaust systems meet the most stringent of noise regulations, high cyclic loading and severe thermal stresses for all sizes of GT’s. With the delicate balance of performance, cost-effectiveness and turbine efficiency, our in-house ...
-
Manufactured by Schauenburg MAB GmbHbased in GERMANY
When excavating tunnels, tunnel boring machines are required that can operate in a wide spectrum of different soils. When using tunnel boring machines with mud conveyance, a conscientious design of the slurry treatment system is the basis for the technically, economically and ecologically successful realization of tunnel construction with differing challenges. The task of the slurry treatment is ...
-
Manufactured by APS Antriebs, Prüf- und Steuertechnik GmbHbased in GERMANY
These advanced rock testing plants enable our customers to meet all test requirements in rock research testing. The modular systems can be configured with various types of hydraulic actuators with different load ranges, a variety of test jigs, triaxial cells with different specimen diameter and pressure ranges, pressure controllers as well as different sensors with the necessary ...
-
Manufactured by Develogicbased in GERMANY
The develogic Sono.Vault acoustic recorder and signal analyzer is designed for long- term recording and monitoring of marine acoustic emissions. Driving design parameters during development were energy-efficiency, premium recording quality, application flexibility and ruggedness. The system is able to record acoustic signals continuously with sampling rates up to 96kHz @24bit sample resolution ...
-
Manufactured by EmiControlsbased in ITALY
The fully-automatic V12S offers a universal, powerful and super silent environmentally-friendly dust control solution. The high-performance turbine with linear injection geometry of the water is an optimal solution for very precise throw. The turbine has the ability to run at 2 speeds giving the turbine the flexibility to throw the atomized water from 10 meters to over 50 meters. Special nozzles ...
-
Manufactured by EmiControlsbased in ITALY
The new and restyled V22 is the most powerful dust-suppression machine in EmiControls’ product range. Due to its long projection range and integrated 350° pivot function, it is most suitable for dust-control applications covering large areas. The patented nozzle head and the outer nozzle ring generate a finely atomized mist, which binds the dust particles and prevents them from ...
-
Manufactured by CAMS srlbased in ITALY
Primary shredder FTR and secondary shredder CTR allow to reduce the volume of several material, including glass, with even perfect sizing for transport or subsequent ...
-
Manufactured by CAMS srlbased in ITALY
The mobile plants of UTM range, the transportable ones of UTS range and the rollback plants of UTH range are the ideal solution to crush and recycle aggregates, rubble and other ...
-
Manufactured by EmiControlsbased in ITALY
The L3 lance is the first dust-control lance on the market. It is a compact and user-friendly solution for close-range applications. It works without a turbine, allowing it to get near to the source of dust. The spray action can be narrow and flat, fan-shaped or cylindrical, depending on the requirements in any given case. With its flexible spray head, the fine mist jet with its optimized droplet ...
-
Manufactured by STDS-Jantz GmbHbased in GERMANY
The own developed STDS-Jantz drilling rig Premodrill 50 sets new dimensions to the well drilling industry.Premodrill 50 convinces with its simple operation via a remote control panel for driving , all drilling functions and also winch, mud pump and hydraulic casing extraction ...
-
Manufactured by CAMS srlbased in ITALY
Crushing plants from CENTAURO range combine shredder, screen and magnetic separator in a single equipment. Powerful and efficient, these mobile mills are able to process material usually difficult to treat or wet, maintaining the productivity also in bad condition of work at constant efficiency. Thanks to the innovative patented technology, they are able to crush using the cutting force with a ...
-
Manufactured by Rtec Instrumentsbased in USA
The state of the art Rtec CMP tester CP-6 allows to study and characterize CMP process like never before. In addition to polishing wafers & substrates the tester comes with inline surface profilometer. This combinations sheds information on why and how the surface, friction, wear etc. changed. Tester also measures several inline parameters such as friction, surface roughness, wear volume etc. ...
-
Manufactured by Physical Acoustics Corporation (PAC)based in USA
The PKWDI sensor is a wideband frequency, acoustic emission sensor with an integral, ultra low noise, low power, filtered, 26dB preamplifier, which can drive up to 200 meters of cable. This sensor represents an improvement in both noise and low power consumption performance, with noise level below 3 µV and power consumption of 25 mW. The PKWDI features a strong stainless steel, integrated ...
-
Manufactured by EnergyLink Internationalbased in CANADA
Selection of the correct catalyst is critical to meeting performance guarantees, while optimizing the system design. At EnergyLink International, we are there right from the start. Through relationships with all key catalyst suppliers, an in-house team with proven catalyst system project experience and complete technical and operational knowledge of all critical selection variables, we can work ...
-
Manufactured by Develogicbased in GERMANY
HAM.BASE, the develogic hydro acoustic modem, is a powerful and reliable underwater communication system. It is designed to meet the requirements of research and exploration, established in various subsea communication ...
-
Manufactured by Rtec Instrumentsbased in USA
Fretting wear tester module is used across wide applications ranging from materials, lubricant, grease, coating etc. testing. The state of the art fretting module has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range makes it an ideal fretting wear material property tester for both industry and university ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you