Acoustic Measurement News

  • Release of new software for Nor150, NorConnect, NorVirtual and NorReview!

    The update is a free update, except for customers having NorReview older than V6. Nor150 V2.0 and V2.1 requires NorReview V6 to support the new marker storage format, profile B and profile moving. ...


    By Norsonic AS

  • A new generation of green men

    In response to the trend towards high-quality audio in mobile phones and the increasing popularity of headphones and headsets for communication and entertainment, Brüel & Kjær has developed the new High-frequency Head and Torso Simulator (HATS) Type 5128.  High-frequency HATS addresses the need for realistic, accurate and repeatable acoustic measurements across the full ...

  • Nanyang Technological University amps up mobile sound quality and uses Brüel & Kjær’s products during development

    To meet the demand for mobile devices offering top quality sound - without sacrificing power - Nanyang Technological University (NTU) has invented an ultra-high-quality Class-D amplifier.  Created by NTU’s Division of Electrical and Electronics Engineering in Singapore, the ultra-high-quality chip can tolerate more 'noise' from other components in a device, which reduces ...

  • Audio & Acoustic Seminar in Japan

    NTi Japan was privileged to present the XL2 Acoustic Analyzer to more than 70 sound engineers at Sound Festa in Osaka on 24th June 2015. The engineers learned how a high-quality sound reproduction can be achieved. In this seminar on “Audio & Acoustic measurement with Handheld Analyzer“, NTi Japan CEO, Tatsuya Okayasu covered practical applications on sound reproduction. Okayasu ...


    By NTi Audio AG

  • Pioneering Scottish-based acoustic technology company expands its reach

    St Andrews Instrumentation, one of the UK’s leading designers and manufacturers of innovative acoustic technologies, has invested in a new headquarters and test centre as it advances its global production ambitions. The company – a wholly owned subsidiary of the University of St Andrews - has taken a lease on two units at Mill Court Industrial Estate in Tayport, Dundee, effectively ...

  • The new DAQ Device from SAIL is set to Revolutionise Acoustic Monitoring

    St Andrews Instrumentation (SAIL), pioneers in passive acoustic monitoring instrumentation, is pleased to announce the launch of its new data acquisition device (DAQ) at Ocean Business 2015, stand V38. Encased in compact and robust IP51 housing, the new SAIL DAQ device is a compact and easy to use solution for real time data retrieval. Simply connect a Hydrophone or Microphone or other inputs and ...

  • Sound and vibration pioneer Per V. Brüel turns 100

    For this milestone moment, Mr. Brüel will look back on a century in which he played multiple larger-than-life roles, including engineer and visionary inventor, founder of a major global corporation, pilot and explorer who personally pioneered new markets. “He literally created the field, as industries didn’t measure sound and vibration at all in the days when he ...

  • Speech Intelligibility Reporting Tool extended

    The XL2 Acoustic Analyzer reliably measures the Speech Transmission Index (STI). The results can be imported into the STI Reporting Tool to create professional measurement reports in accordance with the IEC 60268-16 standard. The report ...


    By NTi Audio AG

  • Porpoise detections for an early Christmas present

    We got an early present when our second generation Decims (formerly known as PAMBuoy) system detected porpoise off Stonehaven, yesterday. Decimus is an innovative detection and monitoring OEM solution for system integrators working in acoustic monitoring. Right at the cutting edge of technology, Decimus® uses innovative, low power technology to enable large scale data compression ...

  • XL2 Analyzers at Southampton Solent University

    Southampton Solent University is well equipped with no less than ten XL2 Audio and Acoustic Analyzers, each installed with the Extended Acoustic Pack option. Katri Ingram BSc (Hons) Sound Engineering, an Acoustics Technician at Solent Acoustics, discusses how the XL2 is used for education and consultancy work: "We often use the XL2s for festival noise monitoring, as well as for a variety of ...


    By NTi Audio AG

  • LabVIEW Driver for FLEXUS FX100 available

    NTi Audio has released a complete LabVIEW driver for the FLEXUS FX100 Audio Analyzer, allowing the user to graphically integrate Audio Analysis blocks into the National Instruments (NI) Measurement Suite.   The LabVIEW driver provides the full set of functions, routine calls and procedures for the FX100 Audio Analyzer; intuitively integrating even complex audio ...


    By NTi Audio AG

  • Silixa Ltd named as finalist in World Oil Awards 2013

    Silixa Ltd. is pleased to announce that its intelligent Distributed Acoustic Sensor™ has been selected as one of the finalists for the prestigious World Oil Awards in the category of Best Visualization and Collaboration Awards. Silixa’s intelligent Distributed Acoustic Sensor (iDAS) ...


    By Silixa Ltd

  • 01dB Now Offers New Tapping Machine TM01 for Acousticians

    As a worldwide exclusivity, 01dB now offers TM01, a new tapping machine designed by acousticians for acousticians. TM01 is a tapping machine designed to carry out impact sound measurements in accordance with current regulations and standards. Related applications include: ...


    By ACOEM

  • Made to measure

    Carrying out sound insulation measurements is set to become much simpler for building acoustic practitioners with Brüel & Kjær’s new Power Amplifier: 2734-B.As building acoustic assessments are now used widely to certify rooms for their intended use, diagnose noise nuisance issues and improve music or theatre performing spaces, the job of measuring sound insulation or reverberation time has ...

  • Revolutionary reflex

    Investigating acoustic and vibration measurements is set to become much easier with Brüel & Kjær’s new post-processing software - PULSE Reflex.Designed in close cooperation with the company’s customers already using its PULSE data analysis system, within different industry sectors worldwide, PULSE Reflex comprises three main applications. The first, PULSE Core Time, is a record editing and ...

  • Bruel and Kjaer Keeps finger on PULSE

    Leading sound and vibration expert Bruel & Kjaer has launched PULSE 12 - the latest version of the next addition to its PULSE data analysis platform family – specially developed utilising input from over 250 Engineers worldwide. Bruel and Kjaer conducted themed workshops, in many different countries around the world, to gather information from ‘real-life’ work scenarios of sound and vibration ...

  • SEABED BV NEW AC-ROV DISTRIBUTOR

    It is with great pleasure AC-CESS Co UK Ltd (Aberdeen, Scotland) announce Seabed BV (Amsterdam, Holland) as the new distributor of the AC-ROV underwater inspection system for the Benelux countries. ...


    By AC-CESS Co Uk Ltd

  • CASELLA Technology Removes Range Adjustment Errors in Acoustic Measurement

    The latest technology developments from Casella CEL are playing a significant role in eliminating the most common cause of acoustic measurement errors - range adjustments. The new 400 series of sound monitors that offer real time frequency analysis and a new software ...


    By Casella

  • CASELLA TECHNOLOGY REMOVES RANGE ADJUSTMENT ERRORS IN ACOUSTIC MEASUREMENT

    The latest technology developments from Casella CEL are playing a significant role in eliminating the most common cause of acoustic measurement errors - range adjustments. The new 400 series of sound monitors that offer real time frequency analysis and a new software ...


    By Casella

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you