Health & Safety Applications available in Asia & Middle East
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Wastewater treatment solutions for textile industry
The Textile industry is a water intensive industry. Rising water costs due to increasing water scarcity and more stringent environmental regulations have lead to textile companies globally to seek advanced, innovative and efficient textile wastewater treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, sustainable water quality management and conservation through water reuse strategies are increasingly becoming critical to the ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Workwear & protective fabrics for defence industry
Where protection from flash fire & IEDs is required, Arvind PRO1 products can help Saveprecious human lives. Improvised Explosive Devices expose soldiers to extra risks of injury due to flash fire and extreme heat exposure. Although outer garments may be flame resistant, wearing the appropriate FR Cotton inner garments as well, can help save a soldier’s ...
By Arvind Limited based in Kalol, INDIA.
-
Environmental technology for textile finishing industry
The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of ...
By Körting Hannover AG based in Hannover, GERMANY.
-
Biomedical waste sterilization solutions for textile sector
Autoclave is used in the fixation process in the textile industry. The fixation process is carried out to increase the quality of the yarn raw material used in the textile industry with the effect of steam pressure and temperature. By removing the deformation effects in the yarn raw material, quality problems in the ongoing stages are eliminated. After the autoclave process, the yarn raw material becomes smooth and tough and ensures high quality products in the next ...
By ReCap based in Odunpazarı, TURKEY.
-
Chemical solutions for resins: textile and leather industry
Derypol, with more than 50 years of experience manufacturing resins and polymers, has the technology and experience necessary to develop products with applications in very diverse markets, such as textiles, tanning, construction, ...
By Derypol, S.A. based in Barcelona, SPAIN.
-
Industrial manufacturing solutions for the textile mills industry
The textile mills industry includes man-made fiber mills and wool woven fabric mills, carpet and rugs, yarn-spinning mills, non-woven fabric facilities, and tire cord and fabric facilities. These businesses require provide proven emission control solutions, including mist elimination and odor ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Elemental Analysis for Woven & Nonwoven Fabrics by EDXRF / XRF
Fabrics fall into two broad categories wovens and nonwovens. A woven is a cloth formed by weaving. Wovens only stretch in the bias directions unless the threads are elastic. Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments created by mechanical, thermal, or chemical ...
By Applied Rigaku Technologies based in Cedar Park, TEXAS (USA).
-
Filter for P.T.A. / C.T.A. Silo Vent Emissions in Polyester Fibre Production
PROCESS INFORMATION: In a plant making Terephthalic Acid (a constituent for the production of Polyester fibres) the silos or hoppers which are filled by mechanical or pneumatic conveying of the material. Raw material (C.T.A.) feed silos in the preparation section empty into the mixing process, and finished product (P.T.A.) silos are discharged to bagging stations. The filling and emptying of these silos generated vent gas which has to be treated before going to ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Foam control technology solutions for textile & carpet industry
Our roots are in the textile industry and we offer a variety of defoamer chemistries for dyeing, fire retarding, and more. ESP has over 175 years of combined experience in the manufacture of foam control products for textile and carpet manufacturers. Our team of technologists, engineers, chemists, and formulators create solutions for an array of applications and can customize a solution to meet your specific needs. Our chemical additives are suitable for reducing foam at all stages of textile processing, whether ...
By Enterprise Specialty Products, Inc. (ESP) based in Laurens, SOUTH CAROLINA (USA).
-
Textile Effluents: Treatment and Disposal by YASA ET
Textile industries consume different kinds of manmade dyes or other chemicals and release huge extents of highly polluted water into the environment. The main pollution in textile wastewater come from dyeing and finishing processes. These processes require the input of a wide range of chemicals and dyestuffs, which generally are organic compounds of complex structure. Water is used as the principal medium to apply dyes and various chemicals to textiles. Since many of them are not contained in the final product, ...
By YASA ET based in Shanghai, CHINA.
-
X-ray Photoelectron Spectroscopy for Coatings & Thin Film
Surface coatings and thin films are of great commercial importance in many industries and are used to enhance or provide required properties to bulk materials specific to their applications. Thin films can range from tens of Angstroms to several microns in thickness and find application in areas as diverse as optical anti-reflective coatings, architectural glazing and drug eluting thin films in the pharmaceutical industry. X-ray photoelectron spectroscopy (XPS) is ideally suited to characterising the surface ...
By Kratos Analytical Ltd. based in Wharfside, UNITED KINGDOM.
-
High-Tech vacuum evaporator systems for Textile Industry
Concentrating of fixer, developer and bleaching baths. Concentrating of pressure roller and frame washing water. Concentrating and recovery of colour and printing pigments from washing water. Concentrating and recovery of organic contaminants from polluted waste water. Concentrating of adhesives or glue from washing ...
By SCHELL GmbH & Co.KG. based in Telfs, AUSTRIA.
-
Effluent filtration in textile industry
To separate solids from liquids, nonwoven or woven fabrics out of animal or vegetable fibers are used, and synthetic fibers are now in use since several decades. In cross-flow filtration the filtrate is recuperated transversely to flow direction through a porous wall layer. In classic filtration, a filter cake is built up on filter surface and this cake reduce the flow of filtrate which will depend of the cake permeability. Often it needs such a cake structure build-up in order to obtain a clear filtrate. The ...
By Bucher Unipektin AG based in Niederweningen, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you