Health & Safety Applications
-
Solvent Recyclers and Cleaners for the Construction Industry
We design solvent recyclers and washers to clean and maintain tools and filtration equipment used for the maintenance and construction of bridges, buildings, antennas, turbines and other structures requiring regular cleaning. Establish a new corporate image, clean old traces left by time or add new protective covering to a surface – whatever your need, we offer a complete range of equipment that gets the job done easily and ...
By International Surface Technologies (IST) based in Saint-Eustache, QUEBEC (CANADA).
-
High quality gas sensor solutions for building and IAQ
Precise measurement of air quality. The carbon dioxide content of room air gives a measure of the air quality, especially as it relates to the health and comfort of the people occupying the building. Air quality can be adversely affected by increased levels of carbon dioxide, carbon monoxide, volatile organic compounds (VOCs), particulates, or bacteria. Increased ventilation reduces the level of all of these unwanted contaminants. Measuring the CO2 concentration provides an economical way of ensuring that there is ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Building solutions for the asphalt manufacturing sector
In asphalt manufacturing, the product is typically processed from the heaviest part of petroleum. Emissions from oil refineries and asphalt manufacturers are tightly controlled using technologies that recover and re-use the particulates in the heating process. This reduces environmental emissions and also increases the efficiency of the heating ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Building solutions for the gypsum manufacturing sector
The chemical composition of gypsum is calcium sulfate dihydrate (CaSO4·2H2O). There are two types of gypsum: natural gypsum and Flue-Gas Desulfurization (FGD) gypsum. FGD gypsum is a by-product of desulfurization of flue gas from the stacks of fossil-fueled power plants, and the emissions captured from smoke stacks are purified into a hard substance and manufactured into gypsum. FGD gypsum has been used to manufacture gypsum board for more than 30 ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Operational modal analysis software solution for civil engineering sector
Back in the 1980’s civil engineers were among the first to adapt Operational Modal Analysis (OMA) for testing of large structures. The size of the civil engineering structures and the fact that ambient excitation typically is uncontrollable pushed the development of OMA techniques heavily in this area. Today OMA is a wide spread technology used in many engineering field but testing of civil engineering structures is still the most popular OMA application. Back in 1999, ARTeMIS software was originally ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Noise and vibration monitoring for the construction site
By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Noise testing equipment for construction noise monitoring
The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories: (1) Noise at Work (potential for noise-induced hearing loss due to long term exposure to noisy activities) (2) Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Oil Mist Seperator for Building Construction
Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental ...
By Contec GmbH based in Bad Honnef, GERMANY.
-
Software for Infrastructure Monitoring
Advanced observability across cloud and hybrid environments with continuous auto-discovery of hosts, VMs, containers and orchestration, network, devices, logs, events and more, all in context with precise, AI-powered ...
By Dynatrace LLC based in Waltham, MASSACHUSETTS (USA).
-
Noise and vibration problem solutions for building & construction sector
Approved Document E of The Building Regulations (2003 Edition) is the document setting out the requirements for sound insulation in buildings. It contains a requirement that organisations carrying out sound insulation testing should be third party accredited in order to demonstrate their competence to carry out such work. We are registered under The Association of Noise Consultants scheme as a testing ...
By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.
-
Solutions for factory layout, construction, and operations
Reduce your production costs and get products to market faster by streamlining the design, construction, and operation of new and existing factories. Bentley solutions address the full lifecycle of your facility. Our multi-discipline modeling portfolio supports all disciplines involved in the design and construction. And our operational solutions enable professionals who operate, monitor, and measure the performance of production lines. These capabilities enable you to optimize production, improve quality, meet ...
By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).
-
Environment health and safety software for the construction industry
Intelex provides a complete set of software solutions designed to help organizations in the construction industry manage their operational, business and health and safety challenges with ease. Intelex solutions streamline key business processes and save time, money and resources while improving the safety and efficiency of any job ...
By Intelex Technologies Inc. based in Toronto, ONTARIO (CANADA).
-
Pulsair`s industrial mixers for asphalt industry
Pulsair Systems is the leading provider of industrial pneumatic mixing and air agitation equipment for the asphalt industry. Our industrial asphalt tank mixing system are efficient, cost-effective and well suited for mixing sealcoat, asphalt emulsions, coal tar and other asphalt based ...
By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).
-
Ice blasting technology for building restoration and remediation
Applications of Coulson Ice Blast for Building Restoration and Remediation sector: Ice Fire and Smoke Damage Water and Flood Damage Asbestos Removal (Negligible Airborne @ 0.035 mg/m3) Mold Remediation Adhesive removal Reversal of corrosive contaminates Wood Resurfacing General cleaning Brick Stone Concrete Tile Wood Metal Tank cleaning Tar removal Vintage aircraft cleaning Enhanced Ice Soot Lead Paint abatement ...
By Coulson Ice Blast based in , IRELAND.
-
RTLS System for Better Efficiency in Construction
Our RTLS system keeps actual work hours and enables you track the time spent at each job site, so that you can identify ...
By Litum IoT - a Subsidiary of the Litum Group based in Alsancak, TURKEY.
-
Reverse Automated Braking System for Construction Fleet Industry
Dump Trucks are the #1 cause of fatalities on construction sites according OSHA data. Protect your employees, save on insurance costs, and save lives with Search Eye Sensor System automatic ...
By Global Sensor Systems Inc. based in Mississauga, ONTARIO (CANADA).
-
Assembly lubricants for Construction industry
P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Applications and Air Pollutants Removed in the Fiberglass Industry
Removal of urea and phenol formaldehyde resin and fibers from sizing dye operations, particulate and blue haze emissions from fiberglass mat ovens. Removal of styrene emissions from fiberglass composite manufacturing ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry
Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint, PCBs and asbestos on a large ...
By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).
-
Construction & Off-Road Stamped Components and Welded Assemblies for Construction & Off-Road
Heavy duty vehicles require heavy duty metal parts. Let Res assist you in designing stamped metal components that are tough enough to stand up to the demands of the toughest construction and off-road applications. Just a few of the products we already deliver in this category ...
By Res Manufacturing Company based in Milwaukee, WISCONSIN (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you