Health & Safety Applications in Canada

  • Premium

    Industrial gas detection solutions for polyurethane foam manufacturing sector

    Polyurethane Foam requires toxic gases in it’s manufacturing process. The most common gases fall into the Diisocyanate family of gases. Toluene Diisocyanate (TDI) and Methylenediphenyl diisocyanate (MDI) have exposure limits set by the Occupational Safety and Health Administration (OSHA) to ensure employee protection in polyurethane facilities.

    By DOD Technologies Inc Distributor in Newmarket, ONTARIO (CANADA).

  • Premium

    Elemental analysis for the chemistry & materials industry

    Analytik Jena’s high-performance instruments will provide you with a deeper understanding of the chemical composition and characteristics of advanced materials and chemical products, both in research and quality control. Our highly effective analysis instruments not only simplify your daily routine work, but also improve your products over the long term thanks to higher precision in your measurement data.

    By Analytik Jena - an Endress+Hauser Company Distributor in Edmonton, ALBERTA (CANADA).

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Industrial gas detection solutions for semiconductor manufacturing processes sector

    Semiconductor manufacturing processes involve highly toxic substances and flammable gases. Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. Our gas analyzers can be found in a few different places throughout a fabrication facility such as: In the Wafer Reactor, Wafer Dryer, Gas Cabinets, and during Chemical Vapor Deposition. Our units are designed with clean environments in mind. With a sample draw of 400 feet...

    By DOD Technologies Inc Distributor in Newmarket, ONTARIO (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Mercury analysis for quality inspections

    By Analytik Jena - an Endress+Hauser Company Distributor in Edmonton, ALBERTA (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company Distributor in ONTARIO (CANADA).

  • Premium

    Mercury analysis for wastewater

    By Analytik Jena - an Endress+Hauser Company Distributor in Edmonton, ALBERTA (CANADA).

  • Premium

    Analytical instruments for environmental analysis industry

    Whether soil or water samples, Analytik Jena can offer you analysis solutions that are not only at the forefront of technology, but also simplify your everyday laboratory operations. Obtain better results with less effort and discover solutions that allow you to detect toxic elements and sum parameters such as TOC, TNb and AOX.

    By Analytik Jena - an Endress+Hauser Company Distributor in Edmonton, ALBERTA (CANADA).

  • Premium

    Industrial gas detection solutions for oil and gas industry

    The oil and gas industry involves several manufacturing processes and upstream processes that require gas detection solutions to be used on a daily basis. Whether its offshore drilling and exploration, or onshore refining and production of gasoline DOD technologies offers several options to keep work environments up to code and safe for your workers. If you’re in need of a Class1, Div1 unit or need a different option in a non explosive environment, our sales staff will be able to assist in determining what...

    By DOD Technologies Inc Distributor in Newmarket, ONTARIO (CANADA).

  • Premium

    Industrial gas detection solutions for chemical plants sector

    One of the largest users of gas detection safety equipment are Chemical Storage and Chemical Manufacturing Plants. Toxic, asphyxiant, and flammable gases are commonly used in manufacturing and are also by products of the manufacturing process. Storage of these gases is done on site in large metal cylinders. The transferring of gas into other containers or to other parts of the plant can release these gases into the air. Portable and Fixed gas detections systems work together to provide a safety net of gas detection...

    By DOD Technologies Inc Distributor in Newmarket, ONTARIO (CANADA).

  • Premium

    Industrial gas detection solutions for wastewater treatment & utility industry

    We host a large selection of personal gas monitors that are perfect for the Wastewater Treatment and Utility workers. If you fall into this category, you understand the importance of H2S, CO, and CH4 protection. Confined spaces become extremely dangerous when these gases are present and a reliable portable gas monitor can be the difference between life and death. With new additions of MSA, BW Technologies, Industrial Scientific, and several other top brands in portable gas detection, we have options in every...

    By DOD Technologies Inc Distributor in Newmarket, ONTARIO (CANADA).

  • Premium

    Water treatment solutions for cooling water treatment

    Efficiency is everything in the cooling water circuit. Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.

    By ProMinent GmbH Office in Guelph, ONTARIO (CANADA).

  • Premium

    Building solutions for the cement manufacturing sector

    Cement manufacturing has an impact on the environment at every stage of the manufacturing process. Airborne pollutants are released in the form of dust, gases, noise, and vibration when operating machinery and during blasting in quarries. Technologies to reduce dust emissions during the quarrying and manufacture of cement are widely used, as are technologies to trap and separate exhaust gases.

    By CECO Environmental Distributor in ONTARIO (CANADA).

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool...

    By LumaSense Technologies, Inc. Distributor in ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you