Health & Safety Applications
-
Premium
Oil Spill Eater II (OSE) for energy storage and fuel storage leaks
The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since ...
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Premium
Activated carbons solutions for personal protection industry
The Challenge: Manufacturers of personal protection devices are driven to safeguard the public health caused by airborne chemical contaminants. Removal of these contaminants is technically demanding, and manufacturers must meet this technical challenge while navigating stringent regulations. Jacobi’s understands this unique blend of technical and regulatory challenges for personal protection devices faced by our customers. Jacobi provides many different formats of product that are used in different aspect ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Oxygen monitoring from aerobic and anaerobic for toxicity test
Toxicity of pure chemicals is assessed using respirometers by adding increasing concentrations to an active culture. The concentration at which oxygen uptake or gas production begins to decrease is known as the “threshold toxicant ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Chemiluminescense based analyzer for environmental, ambient Air and research sector
Focuses on low NOX and NOX-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOX, NH3, NOX-Amines and NOY. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Fully-automated gas chromatographs solutions for adhesives industry
Synspec instruments are used in the adhesive industry for the comparison of in- and outlet air on the presence of VOCs in the production plants. The target of this application is to ensure workers’ safety and comply with regional environmental regulations. Furthermore, this measurement is utilised to increase the process efficiency and gives the plant management tools to take immediate action if ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Ultrasonic sensors for object detection applications
Often, only the presence of an object is needed rather than the distance. ToughSonic General Purpose ultrasonic sensors can detect objects over longer ranges than traditional “proximity” sensors, and detection can be limited within a specific distance window (range of distances). One or two switches outputs can be set on or off as the application requires, with user-adjustable time delay responses, offering built-in functionality without external controllers. Target object size, shape, orientation, ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
ADVANCEES - Arsenic Removal - Custom skid-mounted water purification equipments for arsenic removal
Arsenic is a naturally occurring element found in soils and groundwater. Arsenic concentrations vary in accordance with geographic location. When arsenic levels are found to be too high at a specific location, it may be necessary to treat water to remove it. Arsenic usually exists in two different forms, or valences, in a natural setting depending on the amount of oxygen available in groundwater. In more shallow aquifers with higher levels of oxygen, arsenic will usually exist as arsenate, As (V). In deeper, ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Marine monitoring solutions for the O2 oxygen monitoring
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ceramic membranes and pressure vessels for biotechnology / chemical industry
In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and ...
By atech innovations gmbh based in Gladbeck, GERMANY.
-
Premium
Visual inspection solutions for the drain inspection cameras for pipe and pipeline inspections
Drain inspection cameras are used for pipeline and duct inspections in plumbing, repair work. These systems consist a long insertion probe with a flexible "goose-neck" video camera probe for getting around corners. LED lights give excellent illumination and cctv type cheap on the tip captures clear images and allows image and video ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Commercial ozone water treatment solutions for ozone generators
We are Manufacturer & Worldwide Exporter of Ozone Generators from India, Asia. You can buy our Commercial Ozone Water Treatment ranging from 1gm/hr – 5000gm/hr to provide Indoor Air Treatment Solutions, Water & Wastewater Treatment Solutions across the ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Total mercury determination in water by CVAAS
Introduction Mercury determination in surface, drinking and waste waters is one of the most popular analyses used for environment pollution and sanitary ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air sampling & monitoring systems for universities, colleges & professional schools
HI-Q realizes and supports the efforts of higher education with a variety of air sampling equipment, systems and accessories. Many of instruments are used as teaching aids for future Health Physicists, Radiation Safety Officers, Industrial Hygienist, Environmental Engineers and other industrial ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Monitoring Storm Water
Accurate Measurement of Storm Water Precipitation utilizing Optical Scintillation Technology. Widely used by NOAA / NWS, military, airports, state DOTs, etc. APG-815 instantaneous rain & Snow liquid water equivalent and accumulation as well as precipitation ID 10 NWS / WMO codes.OWI-430 OWI-430 Present Weather and Visibility sensor reports over 60 NWS and WMO codes. Measurement of instantaneous rain rate; Instant notification of precipitation. No lag period Discriminates between rain, snow, drizzle, freezing ...
By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA).
-
Premium
Flow - Control and Floating Skimmer Systems for Catastrophic Spill
Advancing Oil Spill Processor Accumulates, Separates, and Conditions Oil and Debris Grinder. Completely operator controlled for Spill Specific optimization of operation. The Model 19300 is a high volume, debris grinding, oil spill processor for maximum oil recover efficiency in water and debris environments common of offshore oil ...
By Skim-pak based in Dublin, CALIFORNIA (USA).
-
Premium
Indoor air quality treatment solutions for multiplexes / cinema hall industry
A multiplex has a unique challenge on indoor air quality concerns for two major reasons: Occupants are very high during the show more people are seated per unit of floor area & almost nil off the show. There is an intermittent occupancy. Occupants remain in one place for a longer time. High density occupancy requires good quality of indoor air for the comfort & wellbeing, as risk of cross contamination is high of the ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Air pollution control for the metal decorating industry
Maintain Production Schedules and Profit Margins. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Channel networks solutions for replacement of measurement with inverted syphon sector
Rectangular concrete channel, approx. 2.5 x 2.5 m (w x h). Part filled. Impoundage shield installed later in the channel with inverted syphon and EMF DN ...
By NIVUS GmbH based in Eppingen, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you