Only show results in Michigan? Ok

Health & Safety Applications

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Measurement solution for to multi-stream by-pass system

    A large pharmaceutical plant runs a Thermal Oxidiser on plant to incinerate their solvent-containing gas streams before emission. When the oxidiser is offline, then the plant must monitor the release of solvent to the atmosphere. A ProtIR 204C fixed monitoring system was installed that continually measures 24 plant solvents, including Acetone, Cyclohexane, DCM, DMF, IPA, MIBK, Toluene and THF. Given the high levels that are possible, the system has an active dilution system, reducing the concentration of the...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Algae monitoring of drinking water reservoir -

    Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometri...

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Microbial testing for chemical products industry

    On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Smoke generator device for PPV & impulse ventilation testing

    When water-based artificial smoke is introduced into a rapidly moving air stream, the particles that make up the artificial smoke evaporate much more quickly than they do in a static environment. So if you are looking to produce an artificial smoke that better represents the smoke created by a real fire, we would always recommend the ViCount smoke generator, the smoke from which is virtually unaffected by fast moving air streams. Used world wide PPV training centre`s and to test impulse ventilation systems. A...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Fully Automated Microbiology Systems for Military / Disaster Relief

    We call on our military personnel to defend our country; therefore it is vital that we do our best to keep them healthy. Anywhere military personnel are stationed they deserve the best training, equipment and care available. In both permanent and temporary accommodations, safe drinking and bathing water is high on the priority list. If an E.coli outbreak occurs, the safety of our military men and women and the safety of our country could be compromised. Regular, proactive testing with the TECTA™ B16 could...

    By TECTA Pathogen Detection Systems, INC. based in Kingston, ONTARIO (CANADA).

  • Agitation and mixing solutions for general applications

    Chemineer and Prochem rotating agitators, Greerco High Shear Mixers, and Kenics Static Mixers and Heat Exchangers are used in a wide variety of applications and industries. The ChemScale is used for design purposes based on the problem classification of Blending and Motion, Solids Suspension, or Gas Dispersion.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Direct atomic absorption mercury determination in foodstuff and mixed feed

    Direct atomic absorption mercury determination (without any pre-treatment procedures) in food is complicated by its organics matrix. That is the reason why almost all AAS methods of mercury determination in foodstuff include sample digestion by acids.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Advanced remediation solutions for naturama oil separation sector

    This demonstration shows the effects of Naturama on oil that has been mixed into sand. Specific applications that this demonstration applies to include: Oil Sands. Naturama does not specifically require heat to separate the oil from the sand, however low heat does speed the process. Oil spill / contaminated soil cleanup and remediation. Because of the speed at which Naturama separates the oil from the contaminated soil, and because of the high level of effectiveness and minimal remaining residue, our process...

    By Green Life Development Inc. DBA Timeless Green LLC. based in Las Vegas, NEVADA (USA).

  • Drain, trap & sewer cleaning solutions for restaurant and hotel industry

    Restaurants, fast food, hotel and other commercial operations with kitchens can experience clogged drains caused by FOG accumulation. These situations always occur at inconvenient times when the kitchen is in full operation and cause serious disruptions. The costs for emergency interventions are considerable. QM Environmental Services offers a range of MICROCAT products that help solve and prevent these plumbing systems from clogging and keep them free flowing and odour free. Developed through the years, MICROCAT...

    By QM Environmental International B.V. based in The Hague, NETHERLANDS.

  • Liquid/solid separation solutions for the food processing industry

    Installation Of SAF System For The Food Processing Industry. At Heron Innovators, our experienced team of engineers and technicians provided a fully integrated Suspended Air Flotation (SAF) system installation for a meat processing facility. For this project, the customer required a system to remove suspended solids, fats, oil and greases from wastewater. Our trailer-mounted Model SAF125 treatment system installation delivered a comprehensive solution.

    By Heron Innovators based in Rocklin, CALIFORNIA (USA).

  • Determination of heavy metals in food

    This analytical procedure is intended for measuring the content of the elements (cadmium, lead, arsenic, tin, chromium and mercury) in the samples of food products by atomic absorption spectrometry with electrothermal atomization using an “MGA-915M” Graphite Furnace AA Spectrometer. The method is based on measuring resonance radiation absorption that occurs when the radiation passes through a layer of atomic vapor in the electrically heated graphite furnace of the “MGA-915M” AA spectrometer....

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Pumps for Asphalt / Bitumen

    DESMI has a full range of different pumps and matching equipment supporting the handing of bitumen products. Including unique features suited for today’s needs and new polymer based formulations, we have the solution. For certain applications, we can offer proven sealing options, available is also a patented zero-leakage pump with a state of the art magnetic coupling. This pump offers a total protection against spillage and vapour, which may create environmental hazards. Electrical heating is an alternative to...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Solutions for the aerobic bioremediation

    BioSolve Pinkwater is used to accelerate natural bioremediation of contaminated soil either on site through surface application or on land farms through application to biopiles. When Pinkwater solution is sprayed onto and aggressively mixed into contaminated soil, hydrocarbons come in contact with the strongly “lipophilic” (oil loving) surfactant. Mimicking the process by which bacteria make hydrocarbons digestible, the surfactants “solubilize” contaminates, pulling them into an aqueous...

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters. Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation....

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger...

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Energy and Fuels from Municipal Solid Waste (MSW)

    Municipal Solid Waste (MSW), which includes household waste, is the residual waste put into a black bin bag or wheelie bin. MSW contains a mixture of recyclable, organic, inorganic and biodegradable materials. We recover as many recyclable materials as possible before drying and shredding the remainder to make a Refuse Derived Fuel (RDF) for the process. Our energy from waste process, Gasplasma®, transforms the RDF into a clean hydrogen-rich synthesis gas (syngas).

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Hazardous and Special Wastes

    Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an...

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Wastewater treatment for the sea- and inland ports/terminals

    Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid...

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you