Only show results in Texas? Ok

Health & Safety Applications

  • Water reuse solutions for storage tanks

    Mixing Is Key. Just like any other water tank, circulation is key to improve the overall quality. Tanks receiving reuse water most times suffer low dissolved oxygen due to higher than normal incoming BOD which in turn can cause odor issues. They also are vulnerable to faster sludge accumulations. By introducing the appropriate amount of mixing, many of these issues can be minimized or alleviated.

    By Medora Corporation based in Dickinson, NORTH DAKOTA (USA).

  • Air pollution control catalyst solutions for indoor air quality sector

    The Applied Catalyst Activated Carbon Monolith (ACM) and Activated Carbon Monolith Catalyst (ACMC) are used in commercial and residential systems for air purification. Over time, HVAC systems recirculate a wide array of nuisance substances such as allergens, bacteria, mold spores, and volatile organic compounds in the form of smoke or odors. The Activated Carbon Monolith has the ability to capture and trap those substances to prevent them from being recirculated in the air that you and your loved ones breathe.

    By Applied Catalysts based in Doraville, GEORGIA (US) (USA).

  • Rapid Site Cleanup, Closure & Resale

    We can help you achieve site closure and enable the sale or redevelopment of your site in a predictable timeframe with highly reliable results. This is made possible by: Our broad array of thermal remediation technologies, each tailored to the site-specific conditions and contaminants; Tested and proven field operations, processes, and teams; Expertise in designing projects to ensure outcomes without the need for further remediation; and, Our ability to assure a shorter project cycle and verification that goals...

    By TerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA).

  • Air pollution control for soil remediation

    Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).

  • MPP water purification systems for groundwater remediation application

    Toxic hydrocarbons in groundwater can be found dissolved in water diffused over the area. At higher concentrations they can be present as DNAPLs (dense non-aqueous-phase liquids) or LNAPLS (light non-aqueous-phase liquids) creating an enduring source of toxic contaminant supply to the water phase.

  • Equipment decontamination/industrial maintenance solutions

    Existing hydrocarbon contamination, leaks, and spills can be a time-consuming maintenance problem or a major health, safety, and environmental hazard. Fuel storage tanks, pumping stations, equipment areas, and maintenance bays always need cleaning. Use iSorb as part of an industrial maintenance program, after spill cleanup, and for decontamination of equipment at remediation sites. iSorb’s wide range of viscosities means it can be applied with a simple sprayer or painted onto sloping and vertical surfaces....

    By Beyond Environmental based in Geneva, ILLINOIS (USA).

  • Water monitoring equipment for mining

    Optimize your site assessments, operations, and site remediation with In-Situ equipment. Have confidence in your operation’s safety and efficiency with continuous water monitoring systems.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Advanced remediation solutions for soil remediation and reclamation sector

    Naturama G3 A-5 is an excellent surfactant, which separates oil from other surfaces. It also breaks some of the long oil molecule chains to smaller ones, such as diesel and benzene, which dissolve in the water.

    By Green Life Development Inc. DBA Timeless Green LLC. based in Las Vegas, NEVADA (USA).

  • RemBind - Adsorbent for Remediation Solution

    AquaGate+RemBind is a composite particle consisting of an aggregate core coated with the reactive commercial adsorbent RemBind. This unique product facilitates the uniform delivery of powdered RemBind, for the in-situpassive removal of Per- and Polyfluoroalkyl Substances (PFAS) in groundwater or surface drainage systems.

    By Ziltek based in Thebarton, AUSTRALIA.

  • Waste handling for kitchens

    Wherever food is handled, waste is produced. Waste food creates hygiene risks no matter where it is transported or stored, and handling it is a time-consuming, non-profitable process. The Envac system does away with all manual handling and transport, and instead waste food is dealt with and turned into an important environmental resource.

    By Envac AB based in Stockholm, SWEDEN.

  • Water Storage for Drinking Water Plants

    Superior Tank Co., Inc. manufacturers bolted and welded steel storage tanks for potable water applications. Superior Tank Co., Inc. builds water storage tanks to meet AWWA and NSF 61 Standards. Our bolted steel water storage tanks are manufactured to be installed in 1/3 the time as other storage tanks, are easy to maintain, service and repair.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Industrial butterfly valve solutions for nuclear industry

    Thirty countries currently use nuclear power and about the same number are considering, planning or actively working to include it as part of their energy mix. We’re proud to be involved in a number of high-profile nuclear power projects, at home and abroad. Our valves have the zero-leakage and high integrity properties required in such demanding installations.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required.

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Measurement solution for CO2 capture by anime absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Gas Detection & Hazardous Gas Monitoring Equipment for Mining

    Depending on the type of mining, the requirements for gas detection can vary greatly, however, there are five main sources of hazardous gas in mining applications.

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

  • Online monitoring solutions for determination of iron in hydrochloric acid

    Levels of iron in liquid hydrochloric acid (HCl) are precisely monitored by means of the EZ-HCl analyzer system. Iron oxides that dissolve in the HCl can lead to the formation of ferrous chloride (FeCl2) and compromised purity of the end product. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Hand Held Analyzer for Forklift CO Emissions

    Many forklift trucks have internal combustion engines that burn propane, natural gas, diesel, or other fossil fuels. A portable combustion gas and emissions analyzer can be used to optimize combustion efficiency & maximize fuel savings, identify and quantify sources that can adversely affect safety and comfort in the work environment, and measure and reduce harmful emissions in the forklift engine exhuast gas.

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Noise testing equipment for vehicle noise monitoring

    In a world where there is a drive for everything to be quieter, vehicle noise measurement and control is a growing application. If measurements need to be made to ISO 5130:2007, which is an internationally recognised standard for vehicle exhaust noise testing, a more detailed measurement needs to be made. ISO 5130:2007 requires three consecutive measurements to ensure repeatability. These measurements are taken at a specified engine speed, or RPM, and the maximum sound level produced during the test is taken.

    By Pulsar Instruments Plc based in Filey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you