Biohazard Applications available in Tuvalu
-
Premium
Chemical Water Treatment for cleaning
Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Air sampling & monitoring systems for government sector
HI-Q serves the needs of various government agencies with a wide range of application-specific, customized air sampling products. HI-Q works directly with governmental agencies such as the Environmental Protection Agency (EPA), Department of Energy (DOE), Department of Defense (DOD) & Department of Homeland Security (DHS) to develop situation specific, cutting edge air sampling products to help recognize potential threats. Since September 11, 2001, HI-Q continues to have an ongoing relationship with the EPA ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Eolo - composting and biofiltration system for biofiltration sector
Air biofiltration is a treatment that allows you to reduce the odors that come out of industrial or waste treatment plants. ...
By Daliform Group Srl based in Gorgo al Monticano (TV), ITALY.
-
Premium
Activated carbons solutions for flue gas & mercury sector
In many industrialized nations it is common practice to use incineration methods for waste disposal. There are also ways to recover energy from the process. However, operating an incinerator requires strict adherence to environmental regulations. Hazardous, clinical and waste to energy incinerators can benefit from our EcoSorb range of activated carbon. Specially designed to adsorb unwelcome airborne compounds from flue ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
When raw materials are purchased it is critically important to verify that the correct materials have been received for quality, regulatory, and economic reasons. Often these raw materials, such as food or pharmaceutical ingredients, are transported in plastic bags or paper packaging. Packaging can be opened to perform a verification test using analytical techniques such as assays or infrared spectroscopy. ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Medical and Bio-hazard Waste Treatment Technology with zero emissions
The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated ...
By Ozonator Environmental Solutions based in Regina, SASKATCHEWAN (CANADA).
-
Hygiene control applications
Methodology: All biological residues contain ATP. When living cells die ATP is degraded to ADP and finally AMP. Measurement of ATP+AMP is a proof of biological residues being present. This can be done using the unique Kikkoman LuciPac Pen (surfaces) or LuciPac Pen Aqua (liquids) with a portable instrument PD-30. Hygiene control measuring ATP only may underestimate the contamination if ATP has been degraded in the biological residues. On the other hand ATP is an indicator that the residues are still alive. Neither ...
By BioThema AB based in Handen, SWEDEN.
-
Disinfection Solutions for Service Network
The TOMI Service Network (TSN) is a network of professionals exclusively licensed and trained to use EPA-registered SteraMist Binary Ionization Technology (BIT). By adding SteraMist into your service offerings, you limit your liability with current customers and increase your current client roster by offering an additional layer of prevention. As a TSN Member, you become an integral part of a nationwide network where you receive access to technical training and support for your SteraMist unit(s), branded marketing ...
By SteraMist Disinfection based in Frederick, MARYLAND (USA).
-
Environmental Service Worker II – FT Geauga
Environmental Service Worker II – FT Geauga Position: Ability to clean patients rooms, public spaces and the collection of trash and bio hazardous material. Familiar with using: Vacuum, wide vacuum, mop, wringer, burnisher, ladder, extractor. ...
By Symphony Talent, LLC based in New York, NEW YORK (USA).
-
Ultraviolet disinfection systems for the liquid sugar areas
With an increasing emphasis on safety, product quality and regulation, the requirement for efficient and effective disinfection of liquid sugar applications has seen many manufactures turn to UV disinfection systems for an effective, non chemical solution. Concentrated sugar syrups have a high osmotic pressure, which prevents micro-organisms from reproducing. However, many micro-organisms still survive in spore form and have the ability to grow and reproduce upon dilution of the sugar syrup solution thus causing ...
By atg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM.
-
Hydroxyl generator for Disaster restoration
Titan Hydroxyl Generators create no ozone while processing hydroxyl radicals and hydro peroxides that will effectively remove fire caused odors, nicotine odors, sewage backups, water damage, biohazard and unintended animal ...
By International Ozone Technologies Group, Inc. (IOTG) based in Delray Beach, FLORIDA (USA).
-
Mold Control
Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers ...
By OmniCleanAir based in Mukilteo, WASHINGTON (USA).
-
Agitation and mixing solutions for water and wastewater treatment.
Municipal water treatment facilities utilize continuous mixing to process drinking water for municipalities. There are a variety of drinking water sources and therefore different processing steps for the water. Processes utilize rotating and static mixing to treat the water for human ...
By National Oilwell Varco (NOV) based in Houston, TEXAS (USA).
-
Sample preparation and pumping systems for wastewater treatment industry
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Flood protection solutions for homeland security sector
The Tiger Dam™ system may be able to contain spilled bio-hazardous materials, wastewater and terrorist intended chemical liquids. The 90 second rapid deployment diversion Tiger Dam™ weighs 65 lbs. when empty, can be immediately filled to 50 feet holding 6300 lbs. of chemical liquid or slurry type mixtures. Simply use a 2″ pump to pump the sand/debris into the tube. The tube becomes an airtight holding tank, with over 6000 lbs. capacity –remove as weight capacity changes with the density of ...
By US Flood Control Corp. based in Carson City, NEVADA (USA).
-
Film-forming amines solutions for cooling towers sector
Cooling Water Systems Solutions: Cooling water imposes numerous challenges in the operation of industrial facilities and its quality is subject to always keeping track of and controlling of major issues like corrosion, biological contamination (microorganisms like bacteria, algae, fungus etc), fouling and scale. Under these difficult conditions, the water quality in cooling towers determines the reliability of the facility and the lifetime of the equipment: towers, piping, heat exchangers. An appropriate water ...
By Fineamin SA based in Geneva, SWITZERLAND.
-
Formaldehyde Monitor for Reducing Air Pollution
Air pollution causes millions of deaths worldwide and costs the world economy $5 trillion per year. Over 90% of the world’s population lives in places where air quality exceeds World Health Organization’s (WHO) guideline limits. Therefore, air pollution has become a major global challenge in the past years. Human activity and natural processes can both generate air pollution. Typical sources of air pollution are e.g. traffic, energy production, manufacturing and chemical industries, fumes from ...
By Gasera Ltd based in Turku, FINLAND.
-
Quarantined and International Waste
Medical (Healthcare) Waste. Bio-hazardous waste. Pathological Waste. Cultures and stocks of infectious agents and associated biological agents. Liquid human and animal waste, blood and blood products and body fluids. Contaminated waste from animals. Sharps. Anatomical. Quarantined waste (airport and border protection). General waste (i.e. kitchen waste, ...
By Ozonator Environmental Solutions based in Regina, SASKATCHEWAN (CANADA).
-
Air sampling and environmental waters for pharma industry
Modern tools and methods for monitoring contamination in air, on surfaces, and waters, as well as biological and particulate contamination in intermediate products such as cell culture media, finished products including parenteral fluids and compound ...
By InnovaPrep LLC based in Drexel, MONTANA (USA).
-
Particulate measurement & control solutions for pharmaceutical industry
Auburn FilterSense particulate monitors are virtually an industry standard device for integral fluid-bed fabric filter systems in the pharmaceutical industry. These monitors provide critical real-time filter efficiency monitoring and early warning leak detection to maximize product recovery of high-value powders and to provide essential protection against biohazard emissions. Auburn FilterSense particulate monitors have become the industry’s preferred product with wide-scale specification by OEMs, engineers, ...
By Auburn FilterSense, LLC based in Beverly, MASSACHUSETTS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you