Building Acoustics Equipment For Health And Safety Near Solomon Islands
-
Manufactured by DEWESoftbased in SLOVENIA
When room acoustics properties are at issue, RT60 solution represents an essential tool for obtaining accurate measurement results. Easy setup enables reliable measurement for effective modification of room parameters and easy achievement of desired reverberation ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
Fusion by Acoem is the only IEC 61672 Class 1 sound level meter/analyser on the market with a built-in 4G modem and your choice of trigger, advanced indicators, aircraft indicators and push data options. With Fusion 4G, conduct all your measurements — environmental, buildings and/or monitoring with one compact and reliable ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The BAS003 Source is designed to generate homogeneous sound fields using random noise in compliance with the following standards: Building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-3, ASTM E90, ISO 140-5, ASTM E966). The BAS003 is typically used to generate a noise in a free-field for the evaluation of the transmission loss index of a façade. The available ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The BAS006 is an innovative device used to create impulsive noise that includes low frequency energy and avoids problems like secondary bounce. These characteristics make it a great choice for quickly measuring reverberation time when the complexity and weight of a speaker and amplifier is not needed. Use the BAS006 with a Larson Davis sound level meter to automatically detect the impulse and ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a uniform acoustic field. The available high-efficiency ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Measurement of reverberation time, sound isolation, and absorption coefficient are generally important measurements when verifying that a space or material complies with design goals. When making these measurements in the field or laboratory it is important to have equipment that is dependable, portable and easy to set up and use. When coupled with the BAS001 omnidirectional speaker or BAS003 ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The System 824 combines sound level meter and real-time analyzer capabilities in one small, rugged package. The instrument covers many important measuring functions in one user-friendly, hand-held ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 1 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Other Sound Measuring Equipment. The Larson Davis CAL200 Sound Level Calibrator is a battery operated precision microphone calibrator used for the calibration of sound level meters and other sound measurement equipment. It can provide an output level of either 94.0 or 114.0 ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Under IEC and ANSI standards, a sound intensity measuring system consists of a two microphone sound intensity probe and a dual channel processor. The accuracy of the intensity measurement is strongly dependent upon the phase accuracy between the two measurement channels, including the microphones. Sound intensity measurement systems are classified into Class 1 or 2 based upon the ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
This versatile instrument, with high definition display, performs the functions of several instruments. It puts the combined features of a precision Class 1 sound level meter, environmental noise analyzer, personal noise dosimeter, and a real-time frequency analyzer in the palm of your hand. The Larson Davis Model 831 is a fifth generation Larson Davis sound level meter, designed for simple ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 1 Handheld Sound Level Calibrator for 1” microphones at 251.2 Hz Used for Sound Level Meters and Other Sound Measuring Equipment. The Larson Davis Model CAL250 is a battery operated precision microphone calibrator used for the calibration of sound level meters and other sound measurement equipment. The CAL250 delivers a full 114.0 dB level output signal @ 251.2 ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters. The Larson Davis CAL150 Sound Level Calibrator is a battery operated precision microphone calibrator used for the calibration of sound level meters and other sound measurement equipment. It can provide an output level of either 94.0 or 114.0 dB ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The BAS004* is used to simulate foot fall noise in a manner that is well controlled and reproducible so that measured results can be replicated and compared with other measurements. Unique to the BAS004 is an innovative method for raising the five “hammers” using an electromagnetic field rather than the traditional motor, gears and cam. This eliminates unwanted vibration and ...
-
based in CANADA
The Ocean Sound Meter is an over-the-side underwater sound level meter and acoustic recorder specifically designed for environmental noise assessments: Precisely calibrated to quantify sound from: Pile driving. Seismic surveys. Low- and mid-frequency sonar. Ambient/background noise. Displays acoustic data and computed levels in real time with audio playback. Compact and easily deployed from any ...
-
based in CANADA
Capture both acoustic and oceanographic data in real-time, be it for scientific research or environmental monitoring. The Observer is an underwater observatory combining superior acoustic data quality and multi-sensor data streaming: Acoustic and oceanographic sensors in one compact system. Real-time data streaming via cabled or wireless telemetry. Versatile and configurable to meet your data ...
-
Manufactured by SINUS Messtechnik GmbHbased in GERMANY
The Apollo-Box is a flexible and reasonably priced 2- or 4-channel data acquisition system with a USB 2.0 interface. This small and robust box transforms a PC combined with our flexible software into a high-quality multi-channel measuring instrument for a wide variety of acoustic and vibration measurement applications. Based on your measurement requirements you may choose from variants with 2 or ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
FSI has been designing and manufacturing precision sensors, sonar systems, and transducers for the oceanographic community since it was founded in 1989, and has extensive experience in building complex transducer elements and arrays for government and commercial customers around the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The ready-to-use package solution for pipeline and water leak locating in buildings: compact – precise – efficient. This complete package solution based on the AQUAPHON and FERROPHON series offers the detection professional a range of possibilities for precisely pinpointing pipelines and leaks in buildings. The package includes an AQUAPHON AF 50 receiver and FERROPHON FG 50 generator. ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
The Sahara platform is a tethered tool that can accurately identify leaks and air pockets in water and wastewater pipelines. It is capable of locating very small leaks typically within 1.5 feet (0.5 meters) of their actual location. The tool also features inline video that allows operators to observe internal pipe ...
-
Manufactured by Colt International Limitedbased in UNITED KINGDOM
Coltlite Cl and Coltlite CL3 are natural louvred ventilators suitable for natural day to day and smoke control ventilation in vertical application. Coltlite is a natural louvred ventilator suitable for natural day-to-day building ventilation, as well as smoke control. Most variants conform to both EN 12101-2 as smoke ventilators and EN 14351-1 as natural ventilators. All products are CE marked. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you