Only show results in Massachusetts? Ok

Chemical Release equipment for Health and Safety

  • Premium

    Jenfitch - Dewatering Chemical for Municipal Wastewater Treatment System

    Jenfitch can provide you a variety of flocculent: dry flocculent and liquid emulsion. These chemicals are very effective in increasing the particle size and water release from the particle. It is a low cost method and simple to use. Jenfitch can provide a simple and effective chemical program to improve clarity, settling and dewatering.

    By Jenfitch, LLC based in Walnut Creek, CALIFORNIA (USA). from Municipal Wastewater Treatment Product line

  • Premium

    Servopro PureGas - Safe Area Gas Analyzers

    The Puregas purifier is a getter-based purification unit designed for the purification of carrier gases chromatography (GC) and other analytical applications. Outlet impurity levels for O2, H2O, CO, CO2, H2, CH4 and N2 are reduced to low parts per billion (ppb) levels or below. The patented Getter alloy operated at elevated temperatures, removes ...

    By Servomex - a Spectris Company based in Sugar Land, TEXAS (USA). from Servopro Safe Area Product line

  • Premium

    ZONEL FILTECH - Model DLW - Belt / Double Layers Weaving Belt

    Zonel Filtech offer the filter belt for horizontal vacuum belt filters and drum filters, for solve the problems of the typical filter belt such as lower transversal stability and easy to wrinkle so as make the filter belt can’t running well, the DLW filter belt was developed.

  • Premium

    Dry Release Teflon Lubricant Spray - 12 Cans/Case

    A chemically inert, non-oily, non-staining lubricant and release agent that is clean and dry during use. The extremely slick nature of this waxy fluorocarbon will not dissolve away from surfaces and will not melt below 500˚F. It repels oil and water, will not attract or hold dust or dirt, and will not become gummy. It is suitable for use as a ...

    By Interstate Products Inc/ Interstate Products based in Sarasota, FLORIDA (USA). from Aerosols - Lubricants & Penetrants Product line

  • Premium

    Star PolyPresses - Dewatering Filter Presses

    Star PolyPresses utilize high-quality polypropylene plates to resist corrosive chemicals. Standard air blowdown manifolds ensure drier, easier-to-release cakes. All hydraulic components are fully enclosed to protect them from harsh environments, yet are easy to access for maintenance.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from HILCO Filter Equipment - Star Filters Product line

  • Kelly - Filter Bags

    Menardi is a recognized world leader in the supply of fabric filter media to the Alumina Refining Industry. Menardi has strategic partnerships and alliances with all of the major alumina producers in both North and South America. Many of the current standard products used in this industry were developed by Menardi and we continue to be the most ...

    By Menardi Filters based in Trenton, SOUTH CAROLINA (USA). from Pressure Liquid Filtration Product line

  • HEPA - Filtration System

    We laminate PTFE membrane on polyester spunbond, synthetic cellulose and other nonwoven media for HEPA air filtration and purification.

  • Köttermann - Chemical Storage Cabinets

    Many chemicals necessary in laboratories release fumes in storage. These can be harmful to health and create an odour nuisance for laboratory staff. With an EXPLORIS® chemical storage cabinet such problems simply vanish into thin air. The fumes from the stored chemicals are effectively removed by continuous ventilation and do not enter the ...

    By Köttermann GmbH & Co KG based in Uetze/Hänigsen, GERMANY. from Hazardous Substances Storage Product line

  • Matsphere - Model MAT 100 Series - Hollw Silica Microspheres

    Silica microspheres can be used for agriculture application such as media support for beneficial microorganism's preparation such as found in biofertilizers or bioinoculants.

    By Materium based in Ithaca, NEW YORK (USA).

  • PistonFire - Model II - Suppressor

    The PistonFire suppressor consists of a pressurized suppressant storage cylinder and a valve body that contains a dust-ignition proof, weatherproof National Electrical Manufacture’s Association (“NEMA”) enclosure. The NEMA enclosure houses the actuating mechanism, pressure switch, pressure gauge, fill valve, OSHA supervisory ...

    By IEP Technologies, LLC based in Marlborough, MASSACHUSETTS (USA). from Components - Suppressors Product line

  • Model FC REL - Membrane System

    FC REL is a 100% active synthetic defoamer that is an extremelyeffective deaerator and defoamer in aqueous environments. FC REL is appicable to coatings, construction chemicals, and other Applications where the controlled release of entrained air and foam control are Required. FC REL does not contain mineral oil or silicones.

    By Enterprise Specialty Products, Inc. (ESP) based in Laurens, SOUTH CAROLINA (USA). from Water and Wastewater Treatment - Membrane Systems Product line

  • WELLAN 2000 - Wastewater Treatment Unit

    Diminishes and detaches lime, rust and organic settlings  in tubes and pipes Diminishes lime residues on fittings, in dish-washers and washing machines Diminishes lime settlings on kitchen sinks and washbasins as well as in 'perlators' and makes stainless steel fittings shine like new Reduces the deployment of cleansing agents and detergents ...

    By WELLAN GmbH based in Asperg, GERMANY.

  • FAST-ACT - Chemical Liquid and Vapor Neutralizer

    FAST-ACT safely contains or neutralizes acids, bases, and other chemical hazards – without identi¬cation – in a single response tool.

    By Fast-ACT based in Fort Myers, FLORIDA (USA).

  • Kipp-Cleaner - NU Neutralisation System

    The Kipp-Cleaner System KC NU and KC EN NU can project the reaction stage with chemical release agents or lower the pH value with carbon dioxide.

    By Ecolistec AG based in Kreuzlingen, SWITZERLAND. from Kipp-Cleaner Product line

  • Goloho-Polymer - Model 4313-AB - Two-Part, 1 to 1 Mix Ratio Silicone Potting

    GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .

    By Goloho Polymer (Changzhou) Co.,Ltd. based in Changzhou, CHINA. from Addition Silicone Rubber Product line


    DEBOND COLD is a non-staining, VOC-compliant, 100% chemically active, concrete form release for application to all types of concrete forms, but especially for use in demanding prestress and precast applications. DEBOND COLD is a pale, fast drying, ready to use, sprayable liquid that is non-toxic and safe to use. DEBOND COLD is a specially balanced ...

    By LATICRETE International, Inc. based in Omaha, NEBRASKA (USA).

  • Sorbents

    Sorbents reversibly bind and release chemicals, and can be used either to remove pollutants from a process or exhaust stream, or to transfer a useful chemical from one environment to another. TDA develops sorbents that work via physisorption at room temperature, and high temperature sorbents that chemically react and bind tightly with the species ...

    By TDA Research, Inc. based in Wheat Ridge, COLORADO (USA).

  • Model 1314 - Pre-Method

    Method 1314 is a percolation column test designed to obtain liquid-solid partitioning (LSP) information as a function of liquid-solid ratio (L/S). L/S is represented as the cumulative volume of leaching solution passing through a column containing a known mass of material. For some materials, particle size reduction may be required to meet column ...

    By Remedius, LLC based in Amarillo, TEXAS (USA).

  • ClenzSoil Petroleum Remediation System

    The Bio Blend approach may be thought of as “remediation with results”, considered to be fast petroleum contaminate reduction technology, suitable for all hydrocarbons. Our goal is remediation in weeks rather than years. Our process allows for tremendous cost savings, while safely using “green, enviro-friendly ...

    By Bio Blend Technologies based in Cantonment, FLORIDA (USA).

  • Nafion - Model 115 - Membrane

    Untreated Nafion 115 is 127 micrometers (5 mil) thick. DuPont™ Nafion® 115 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Membrane Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you