Chemical Safety Equipment For Health And Safety In Connecticut
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Hospitals, hospices, medical clinics, veterinarians, etc., routinely dump contagious pathogens into the sewers and drains daily. Now, after decades of doing so, many of these dangerous pathogens are not only living, but thriving and multiplying in the sewer pipes and manholes where your team works. The newest medical studies have caused a significant increase in the level of concern by the CDC, ...
-
Manufactured by Gems Sensors & Controls, Inc.based in USA
The UCL-510 offers an innovative, non-contact ultrasonic level sensor with no-moving-parts built for challenging fluid measurement. This accurate and reliable sensor is built for general purpose, small tank applications 49.2' (1250 mm) or less and offers switch, controller and transmitter capabilities in one multi-function transmitter. The UCL-510 is suited for corrosive and dirty applications ...
-
Manufactured by AccuStandard, Incbased in USA
Catalog Number: A-001. 17034 Classification: Certified Reference Material. Number of Components: 1. Unit: 100 ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 1…250 mH2O. Accuracy: ≤ ± 2.0 % FS. Operating temperature: -5…80°C. Process temperature: -5…80°C. Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA. Materials: ...
-
Manufactured by Solidification Products International, Inc. (SPI)based in USA
All of SPI’s Containment Liners are engineered as “Complete Oil-Spill Containment Systems,” proven to Prevent Oil Spills and Drain Unwanted Rainwater at all times using “Patented Technology”. SPI’s Containment Liner Systems are “Completely Sealed” leaving nothing to chance where your Valuable Property and Total Compliance are concerned. Contact SPI ...
-
Manufactured by Aqualogic Inc.based in USA
Systems are designed to meet customer process specifications. Aqualogic has been designing and building chemical cleaning systems for 37 years. Our experience allows for proper selection of materials and features to provide maximum life of the equipment. Our staff of application and design engineers work in conjunction with our customers to provide maximum value, while meeting all "Process ...
-
Manufactured by Crane Co.based in USA
Bellows sealed globe valve for chemical applications with safety gland packing in straight type, y-type or corner-type; with flanges or buttweld ends; can be supplied in carbon steel 1.0619 / WCB, stainless steel 1.4408 / CF8M, low temperature carbon steel 1.6220 / LCB / LCC and special ...
-
Manufactured by STS Sensor Technik Sirnach AGbased in SWITZERLAND
Pressure measuring range: 1…250 mH2O. Accuracy: ≤ ± 2.0 % FS. Operating temperature: -5…80°C. Process temperature: -5…80°C. Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA. Materials: ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The ...
-
Manufactured by Owlstone Inc.based in USA
The Owlstone Calibration Gas Generator (OVG-4) is a compact, cost-effective calibration gas system, which can generate NIST traceable, precise, repeatable, and accurate concentrations of chemicals and calibration gas ...
-
Manufactured by Burt Process Equipment, Inc. (BPE)based in USA
Containerized Water Treatment Systems are self-contained units beyond just a skid, which are integrated into a container or other light building structure and include: utilities, environmental protection, and convenience lighting. Container systems serve as a completely stand-alone process that can be integrated into the building without direct impact. ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Available for FlexAir Pro tube and panel diffusers. Maximum mechanical strength and properties—will withstand harsh wastewater environments. Smooth surface characteristics inhibit fouling and prevents build-up of bio-solids. Excellent durability and chemical resistance. UV protection to resist UV rays before start-up of the system. long-term stability in DWP. Tested with over 2 million ...
-
Manufactured by Chem-Tainer Industriesbased in USA
One piece molded heavy walled open top tanks designed to withstand rugged service. Ideal for handling acids and ...
-
Manufactured by Morbark, LLCbased in USA
Our Beever M15R brush chipper is ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class. The powerful TorqMax dual feed wheel compression system generates more than 6,600 lb./ft. of material pulling force. Many ...
-
Manufactured by Morbark, LLCbased in USA
Perfect for rental yards, landscapers, golf courses and pruning crews, the high-capacity Beever M8D Brush Chipper is easy to transport and operate. Plus, it’s the only chipper in its class to combine both a wide infeed chute opening and 1 1/4″ thick chipping disc for a greater chipping capacity than comparable models. The M8D has a 251-pound disc and shaft weight, which provides more ...
-
Manufactured by Morbark, LLCbased in USA
While retaining an 18″ chipping capacity, the Beever M18RX Brush Chipper weighs in at less than 10,000 lbs. (GVWR) fully charged with fluids and winch package, eliminating the need for additional transport licensing requirements. Infeed is made with 7-gauge (5 mm), XF-100 sides and 3/8″ (10 mm) thick, XF-100 floor to increase material tensile strength with lighter weight components. ...
-
Manufactured by Morbark, LLCbased in USA
The Beever M18R Brush Chipper boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class. The unit can be outfitted with a four- or six-cylinder diesel engine and choice of single axle, tandem axle or single axle dual wheel package. With its large capacity and high-production volume reduction capabilities, the Beever M18R Brush ...
-
Manufactured by Morbark, LLCbased in USA
Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Beever M12R Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access. The patented chambered air impeller system increases chip throwing ...
-
Manufactured by Morbark, LLCbased in USA
Beever M15RX Brush Chipper is ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity chipper is now on a compact, lighter weight design platform. The 8.2 lb., 6″ channel frame rails increases structural strength while maintaining low unit weight. With the powerful TorqMax top feed wheel ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you