Chlorinated Solvents Equipment For Health And Safety Available In Newfoundland
-
PremiumManufactured by Fluence Corporationbased in USA
This air stripper serves as a low-maintenance, cost-efficient alternative for filters, packed towers, and mechanical aerators for fast, efficient removal of contaminants. Fluence’s Breeze air stripper serves as a low-maintenance, cost-efficient alternative for filters, packed towers, and mechanical aerators for fast, efficient removal of contaminants from water and wastewater in a wide ...
-
PremiumManufactured by Absolute Ozone®based in CANADA
Ozone resistance is the reason most people select Teflon® tubing. It is a flexible thermoplastic, highly resistant to oxidizing agents. Nearly complete resistance to alcohols, acids, bases and chlorinated solvents makes it excellent for the delivery of ozone. It remains flexible at extreme temperatures and is nontoxic. We recommend using brass or stainless steel fittings with this tubing. ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Non-flammable, all purpose, non-conductive mechanic’s spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film. Does not contain any chlorinated solvents. Safe around most plastic and paint. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Fully automated solution for the determination of trace levels of water in liquefied and permanent gases. The 875 KF Gas Analyzer applies coulometric Karl Fischer titration to determine trace levels of water in a variety of gas types. This instrument ensures straightforward, quick, and accurate ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Use Fluorinated Spill Decks with chlorinated solvents and other aggressive chemicals that may not be compatible with standard polyethylene. The chemical compatibility of our standard Spill Decks and Spill Deck Bladder Systems is very good and usually sufficient for most spill containment applications. But there are times when there is a need for secondary containment of more aggressive chemicals ...
-
PremiumManufactured by ESCO International (EI)based in UNITED KINGDOM
Air contaminants that are harmful to human health and the environment are known as Hazardous Air Pollutants (HAP) or Toxic Air Contaminants. ESCO International has developed a range of novel Catalytic Vent gas Destruct Units” ULTRACLEAN” suitable for the destruction of a wide range of industrial toxic gases. Industrial applications include semiconductor, LCD , and petrochemicals. The ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A superior, long lasting, extreme condition, dry film lubricant and anti-seize coating. Withstands high temperatures and extreme pressures. Provides a dry film lube especially suited for use in dirty or dusty atmospheres. Burnishes into metal to provide long-term lubrication and protection. Inert to water, oil, alkalis, and acids. Methylene chloride free formula is more user friendly and accepted ...
-
PremiumManufactured by Randolph Austin Companybased in USA
Polyurethane tubing, excellent for inks, slurries, & viscous materials. Other applications include use with oils and mild solvents. Prothane II is an abrasion resistant polyurethane tubing excellent for use with peristaltic pumps. Prothane II is a transparent polyester polyurethane tubing that exhibits excellent abrasion resistance, has good low temperature properties and is resistant to ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for automatic, continuous analysis of Volatile Organic Compounds (20 ppb to ppm). The ChromaFID is a gas chromatograph dedicated to the analysis of VOC’s from 20 ppb to ppm levels. The analyser enables the continuous monitoring of the concentration of VOC compounds from C1 to ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by Labconco Corporationbased in USA
The RapidVap N2 Evaporation Systems offer a more efficient, automatic alternative to Kuderna-Danish and rotary evaporators and may be used with a broad range of aggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 875 KF Gas Analyzer from Metrohm is a fully automated solution to determine trace levels of water in liquefied and permanent gases. Applying coulometric Karl Fischer titration, this instrument allows quick (< 5 minutes) and accurate analyses. The KF Gas Analyzer is suitable for a variety of gas types. ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Use Fluorinated Spill Decks with chlorinated solvents and other aggressive chemicals that may not be compatible with standard polyethylene. The chemical compatibility of our standard Spill Decks and Spill Deck Bladder Systems is very good and usually sufficient for most spill containment applications. But there are times when there is a need for secondary containment of more aggressive chemicals ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
Liquid examples: Alaun, borax, Diesel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you