Chlorinated Solvents Equipment For Health And Safety In Finland
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Fully automated solution for the determination of trace levels of water in liquefied and permanent gases. The 875 KF Gas Analyzer applies coulometric Karl Fischer titration to determine trace levels of water in a variety of gas types. This instrument ensures straightforward, quick, and accurate ...
-
Manufactured by FinnSonic Oybased in FINLAND
FinnSonic Optisol is an optimal solution for cleaning large quantities of small parts with inner holes and channels. Finnsonic Optisol solvent cleaning machines are designed for environmentally-friendly and efficient cleaning and drying of basket goods, typically turned or milled bulk, contaminated by oil and swarf. All cleaning stages are performed under full vacuum to ensure that no solvents ...
-
Manufactured by Phenomenex, Inc.based in USA
Enhanced Aqueous Stability: 100 % aqueous stable, excellent for aqueous samples; bonded and solvent rinsable. Extremely inert for actidic compoundss. Enhanced selectivity for low boiling solvents. High retention of alcohols and chlorinated solvents. Increased efficiency at 20 ...
-
based in SWEDEN
The Rotowasher utilises a revolutionary rotating cleaning basket and benign carbon dioxide as solvent. This environmentally friendly solution achieves highest purity in precision parts cleaning. All parts are made of stainless steel. Compact ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 875 KF Gas Analyzer from Metrohm is a fully automated solution to determine trace levels of water in liquefied and permanent gases. Applying coulometric Karl Fischer titration, this instrument allows quick (< 5 minutes) and accurate analyses. The KF Gas Analyzer is suitable for a variety of gas types. ...
-
Manufactured by Dexsil Corporationbased in USA
The L2000DX relies on the same basic chemistry as the Clor-N-Oil test kits, however instead of a colorimetric reaction, the L2000DX uses an ion specific electrode to quantify the contamination in the sample. Sample analysis is available for transformer oils, soils, water and surface wipes. The usable measurement range for oils and soils is 2 to 2000 ppm, 20 ppb to 2000 ppm for water and 2 to 2000 ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High specification process oxygen analyzer, designed for ultimate monitoring performance. The OxyExact safe area oxygen analyzer combines high precision Paramagnetic O2 sensing technology into a flexible and robust safety-enhanced design, optimized to meet the needs of demanding process monitoring applications like feedstock purity testing and clean up, hydrogen and chlorine production, solvent ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Various spare parts and consumables for XRF pellet preparation, XRF sample grinding and XRF Fusion ...
-
Manufactured by Dexsil Corporationbased in USA
If you have a laboratory available and want to obtain optimal precision in your chlorine testing, then the Titra-Clor laboratory kits may be the preferred method. The Titra-Clor kits use chemistry similar to Clor-D-Tect, but because the sample is weighed out on an analytical balance and titrated using a full scale laboratory buret, greater precision and a lower limit of detection are obtainable. ...
-
Manufactured by Dexsil Corporationbased in USA
Relying on laboratory methods to determine hydrocarbon contamination in soil is both time consuming and expensive. Laboratory methods, such as EPA Method 8015, are very expensive and have turnaround times of one to two weeks. Most samples analyzed by this method limit the results to Gasoline Range Organics (GRO) or Diesel Range Organics (DRO). When limiting the analysis to these two ranges, ...
-
Manufactured by Dexsil Corporationbased in USA
Quantitative (Laboratory) Test for Chlorine in Used Oil - (potentiometric end point). Laboratory Test for Total Halogens, (chlorine), in Used (waste) Oil. If you have a laboratory available and want to obtain optimal precision in your chlorine testing, then the Titra-Clor laboratory kits may be the preferred method. The Titra-Clor kits use chemistry similar to Clor-D-Tect, but because the sample ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you