Chlorine Safety Equipment For Health And Safety Available In Oklahoma
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
The GPro 500 Oxygen TDL is a unique analyzer that fits anywhere in your process thanks to the broadest range of in situ and on-line process ...
-
Manufactured by AquaPulse Systemsbased in USA
The Advanced EP1000 is suitable for medium to large applications for automation and management of the water treatment process. It provides multi-parameter monitoring, pump and valve control, data recording and data reporting of all the processes. A detailed summary program with graphs and cloud storage is ...
-
Distributed by Environmental Controls & Methods, Inc. (ECMI)based in USA
Designed specifically for small loop systems, the J-62 will provide domestic users with the same benefits that our larger commercial 'P' units provide for our commercial pool clients. You will be amazed at the results of our pool units. Back-wash time is reduced significantly, and chemical use such as chlorine can be reduced typically by 2/3rds to achieve the same free-chlorine levels. ...
-
Manufactured by Blue Earth Labsbased in USA
Media Master and Media Master RR are granular formulations developed specifically for in-place filter media rehabilitation. These products are designed for removal of organic and inorganic deposits on anthracite, sand, activated carbon and other types of granular media. Treatment with Media Master and Media Master RR is a fast, convenient and economical alternative to media replacement. Filter ...
-
Manufactured by ChlorTainerbased in USA
ChlorTainer’s Double Ton is a high-pressure containment vessel built to accommodate two standard 1-ton chemical containers that are inserted end-to-end inside the vessel. If either of the containers should leak, all chemicals are contained within the vessel and processed at a normal rate, so no hazardous waste is generated. Scrubber systems, fans, pumps, tanks, and mechanical systems are ...
-
Manufactured by Axiall Corporationbased in USA
Accu-Tab chlorinators are made of rigid PVC with seven standard sizes available for industrial applications — 3012, 3075, 3150, 3530, 30600, 361000 and 481200. Axiall has an Accu-Tab chlorinator for nearly every requirement — from less than a pound a day to a few hundred pounds a day.The Accu-Tab system combines uniquely designed, patented chlorinators with slow release 68% calcium ...
-
Manufactured by Muncie Power Products, Inc. (MPP)based in USA
Our trunnion mount cylinders not only offer a mounting style allowing for increased capacity in the dump body through a significant reduction or elimination of the dog house, but also many other features. Offered in both three and four stage versions, the trunnion mount features strict machining tolerances, solid stop contact faces* and larger overlap between stages, making our cylinders some of ...
-
Manufactured by Covermore Buildingsbased in USA
UPGRADED Premium Model. Dual Truss, 7 Arch Frame (upgraded from 5). Heavy Duty solid white 30 oz. PVC Cover!. Twist Lock Mounting – No Welding Required. Container Spacing 37′ 8″. The 40 x 40 x 15 container shelter model provides the most square footage of shelter as well as the height needed for large equipment ...
-
Manufactured by Anatolia Kimyabased in TURKEY
High safety standards. Low-cost in chemicals. Cost-savings on process and operation costs. Capacity : 40 Kg / H. ...
-
Manufactured by Indian Springs Mfg. Co., Inc.based in USA
The Chlorine Institute Emergency Kit-B (Device 12 & 14) is the only US DOT approved capping device that can be applied to a leaking chlorine ton container and shipped over the road legally. FOR: US DOT 106A500X Concave Head Chlorine One Ton ...
-
Manufactured by Edwards and Cromwellbased in USA
Kit “A” includes devices and tools to contain leaks in and around the cylinder valve and in the side wall of chlorine cylinders, US DOT #3A480 & 3AA480. Note: The Chlorine Institute Emergency Kit “A” is the only chlorine emergency kit for chlorine cylinders that is manufactured to the design specifications of the Chlorine ...
-
Manufactured by Cathodic Marine Engineering Pte Ltd.based in SINGAPORE
Using the latest advancement in marine research and technology, the Electrochlorination / Hypochlorite System was designed to impede the adhesion of marine growth to the ship’s internal through the release of chlorine into the water taken by the ship to cool its internal systems. Using electrolysis, this intelligent, self-sufficient system is able to produce chlorine by breaking up the ...
-
Manufactured by Chlorine Specialties, Inc.based in USA
The Chlorine Specialties Emergency Repair Kit "C" is manufactured for use with the standard US DOT #105J500W Chlorine Tank Car and the DOT MC331 Chlorine Cargo Tank. These tanks vary in capacity from 16 to 90 tons of chlorine or Sulfur Dioxide. The kit is NOT designed to be used on liquid full tank cars or cargo tanks. All kits are manufactured totally by Chlorine Specialties in accordance with ...
-
Manufactured by Indian Springs Mfg. Co., Inc.based in USA
The Chlorine Institute Emergency Kit-A (Device 1) is the only US DOT approved capping kit that can be applied to a leaking chlorine cylinder and shipped over the road legally*. For Chlorine cylinders US DOT 3A480 & 3AA480. KIT-A The Chlorine Institute Emergency Kit “A” is manufactured to the design specifications of the Chlorine Institute. The Emergency Kit “A” ...
-
Manufactured by Baoji Qixin Titanium Co.,Ltdbased in CHINA
The titanium anode and titanium electrode (quaternary, five-element, new formula coating) used for chlorine dioxide generator have better electrolysis effect than before, and the energy consumption is reduced by ...
-
Manufactured by Baoji Qixin Titanium Co.,Ltdbased in CHINA
Titanium anode with ru-ir oxide coating 1.Material:Titanium Gr1 Gr2 2.Ru-ir oxide Coated,8-12micron 3.Customizable 4.Surface Treatment: Sandblasting,Acid cleaning, Polished,brushing 5.production time: 15 working ...
-
Manufactured by Dryden Aqua Ltd.based in UNITED KINGDOM
ZPM by Dryden Aqua stands for «Zeta Potential Mixer». ZPM‘s are static mixers for the injection of products such as APF®, ACO® or NoPhos and for the cavitation of water. They are manufactured in stainless steel for freshwater and in titanium or plastic for marine applications. The ZPM is flanged into the pipework, the water is made to cavitate and spin at high speed ...
-
Manufactured by Hexagon Composite Engineering Sdn Bhdbased in MALAYSIA
Our standard counter-current Packed Scrubbers (SPT series) have been pre-engineered to remove corrosive gases and liquid particulates from air streams containing either a single pollutant or a combination of pollutants. All standard scrubbers have been designed to achieve high collection efficiencies with maximum corrosion resistance and minimum maintenance. The standard scrubbers are ...
-
Manufactured by AquaPulse Systemsbased in USA
The EP200 is suitable for small to medium applications for automation and management of the water treatment process. It provides multi-parameter monitoring, pump and valve control, data recording and data reporting of all the processes. A detailed summary program with graphs and cloud storage is available. The EP200 uses real-time monitoring with internet and network connectivity using Ethernet ...
-
Manufactured by Axiall Corporationbased in USA
Accu-Tab chlorinators are made of rigid PVC with seven standard sizes available for industrial applications — 3012, 3075, 3150, 3530, 30600, 361000 and 481200. Axiall has an Accu-Tab chlorinator for nearly every requirement — from less than a pound a day to a few hundred pounds a day.The Accu-Tab system combines uniquely designed, patented chlorinators with slow release 68% calcium ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you