Dioxins and Furans Applications available in Utah
-
Premium
Environmental Data Monitoring Solutions for Air Quality and Emission
There are two types of stationary air pollution sources: Point source pollution (boiler rooms, process, power stations, etc…). Surface pollution (landfill sites, farms, etc…). The main pollutants concerned are mercury, NOx (produced by combustion), VOCs, heavy metals, dioxins (mainly produced by incineration plants), as well as smells (e.g. treatment of co-products in the food processing industry). ECOMESURE provides instruments that measure the pollutant concentration coming out of industrial sites ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA based in Poissy, FRANCE.
-
Chlorinated hydrocarbons
Example: Pharmaceutical industry. Similar tasks: Chemical ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Environmental solutions for the pulp and paper industry
Dürr provides environmental compliance solutions to pulp and paper mills to meet regulatory ...
By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).
-
Air pollution control solution for cement industry
The fundamental ingredient in concrete is portland cement. The cement manufacturing process requires a great deal of energy to heat the mixture of raw materials in a cement kiln. The main source of toxic emissions from a portland cement plant is the kiln. The treatment of kiln exhaust is similar to most incinerators processes. Scrubbers are the best choices for control of acid gases, fine particulate, heavy metals as well as dioxin and furans. The MACT II regulations, yet to be finalized, for cement kilns are ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Waste recovery for organic wastes e.g. PCBs & Dioxins
Tetronics' technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Hazardous waste treatment solutions for site remediation
The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Environmental solutions for the iron and steel industry
Precise and reliable evaporative gas cooling systems and air pollution control solutions for the iron and steel industry. ...
By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).
-
Dioxins and furans
Example: Scrap copper recycling, cobalt for battery production. Similar tasks: Metal recycling, roast processes, thermal waste ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Waste recovery for energy & utilities
In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Environmental solutions for the waste incineration industry
From a regulatory standpoint, the waste incineration industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from evaluating their air pollution control ...
By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).
-
Thermal Remediation Inside & Near Buildings & Infrastructure
In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other ...
By TerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA).
-
Air Pollution Control Solution for the FGD - SO2
Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids. ...
By Macrotek Inc. based in Markham, ONTARIO (CANADA).
-
Activated Carbon for Cabin Industrial Air Purification industry
GCARBON offers a range of activated carbon specially manufactured for industrial air treatment, such as for Flue gas Cleaning, Waste Gas Treatment, and Compressor ...
By Gowrishankar Chemicals Pvt Ltd based in Tumkur, INDIA.
-
Air filtration solutions for flue gas sector
Untreated flue gas can emit harmful gaseous compounds into the air. Puragen Activated Carbons products are effective at high temperatures and, due to their large surface area, capture a range of compounds from flue gas. OxPure™ powder activated carbon, when injected into flue gas from metal smelters, steel mills, cement kilns, incinerators, and coal fired utilities, enables these industries to reduce mercury, dioxin, furans, and other emissions to meet stringent ...
By Puragen Activated Carbons based in Palm Beach Gardens, FLORIDA (USA).
-
Analysis of Dioxins by GC-TQMS
Dioxins and Furans are among the most toxic chemicals and are classified as Persistent Organic Pollutants (POPs). Dioxins can invoke serious health effects in humans such as loss of body weight, hormone disruption, reproductive disorders, skin toxicity, ...
By Scion Instruments - Techcomp Group based in Livingston, UNITED KINGDOM.
-
Air Pollution Control Systems for Toxic Heavy Metal and Dioxin Destruction
Toxic heavy metals, in particular mercury and cadmium, may be present in the thermal oxidiser flue gas, and must be abated to meet the site or process disharge permit. Dioxins, furans and PCBs are extremely toxic and their discharge to stack is similarly tightly regulated, with typical dioxin emissions standards 0.05-0.1 ng/m3. Dioxins, furans and PCBs are destroyed by correct thermal oxidation, but dioxins may reform post oxidation by de novo synthesis, typically in the range ...
By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.
-
Determination of Furan in Coffee by Static and Dynamic Headspace/GC/MS
Furan is a highly volatile compound and is formed as a result of the thermal treatment during the roasting of coffee beans. Due to the toxicity and carcinogenicity of furan it is a necessary to determine the content of furan in food after thermal ...
By Scion Instruments - Techcomp Group based in Livingston, UNITED KINGDOM.
-
Ozone/UV systems for Industrial, municipal, and residential wastewater treatment
In 2004-2005 LIFETECH's laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the 'Spolana-Dioxins' Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two ...
By Lifetech based in Brno, CZECH REPUBLIC.
-
Bio-based screening technologies solutions for the food / feed industry
BDS offers analyses that specifically target dioxins, dioxin-like PCBs, nondioxin-like PCBs and PAHs. In addition to the screenings for adverse compounds, CALUX assays are used in screenings for potentially beneficial functional traits of food products. With our DNA-based authentication service we also offer the possibility of tracing the origin of food constituents such animal species included in meat-containing ...
By BioDetection Systems b.v. based in Amsterdam, NETHERLANDS.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you