Dioxins And Furans Equipment For Health And Safety Available In Yemen
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Furan Resin Mortar/Grout No. 21C is a two-component, 100% carbon- filled bonding material for chemical resistant masonry units and quarry tile. No. 21C and chemical-resistant masonry units used with a suitable membrane form a complete system to protect concrete and steel substrates from attack by corrosive chemicals and physical ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by ESCO International (EI)based in UNITED KINGDOM
Air contaminants that are harmful to human health and the environment are known as Hazardous Air Pollutants (HAP) or Toxic Air Contaminants. ESCO International has developed a range of novel Catalytic Vent gas Destruct Units” ULTRACLEAN” suitable for the destruction of a wide range of industrial toxic gases. Industrial applications include semiconductor, LCD , and petrochemicals. The ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
For a less demanding, lower throughput gas cleaning system, the venturi scrubber is a well tested and respected design used by many industrial processes. It uses a combination of vortex technology and high pressure water misting to remove harmful elements from the exhaust ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Mercury Monitoring systems CMM AutoQAL and CMM systems are the perfect solutions for monitoring mercury continuously from hot, wet and corrosive gas streams. These future-proof systems have the lowest certified range in the world (0-5 µg/m3) and CMM AutoQAL has an automatic and integrated QAL3 validation ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Compact Method 23 sampling system is utilized for US EPA Method 23 Determination of Dioxins and Furans from stationary sources. Dioxins and furans are an unwanted by-product of combustion processes such as municipal and industrial waste, wood and oil ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
Manufactured by I.W. Tremont Co., Inc.based in USA
Qualitative and quantitative cellulose filter paper is available in a wide range of grades to meet different separation ...
-
Manufactured by JW Holdingsbased in NORTH KOREA
Although bottle containers have been mainly used since the production of IV solution, plastic containers have appeared all over the world due to problems such as bottle weight and risk of damage. Plastic containers can be classified into PVC and Non-PVC. PVC is an infusion container material that is widely used worldwide because of its low cost and easy molding. However, DEHP, a plasticizer used ...
-
Manufactured by MANEK ACTIVE CLAY PVT LTDbased in INDIA
It is great pride to introduce ourselves as manufacturer and exporter of high quality bleaching earths. We have plant capacity 80,000 MT per annum powder and granules. We mine, process and market all types of Bleaching Earth for all type of edible and non edible oils processing. We are regularly supplying our well-known brand product to many refineries all over the world with quality and ...
-
Manufactured by BioDetection Systems b.v.based in NETHERLANDS
BDS offers different products that have been optimized for the use together with our bioassays. Our columns that are extensively used in our dioxin analyses are tailor-made to ensure a fast running profile, easy cleaning ability and are robust in their use. The columns can be delivered along with a robust placeholder both for columns as well as for collection ...
-
based in CANADA
Petro-Wipes were developed to provide a portable, self-contained field decontamination product that can adsorb petroleum hydrocarbons, chlorinated solvents, organo-metallic, free-product (LNAPL and DNAPL), metallic dust, as well as other contaminants. Petro-Wipes meets the ASTM D5088 Standard for the Decontamination of Field Equipment Used at Waste Sites, and Low Level Radioactive Waste Sites. ...
-
Manufactured by OMNI Conversion Technologies Incbased in CANADA
Omni CT has commercialized a truly Omnivorous waste conversion system to produce a valuable Syngas. OmniSyngas is a refined gas tailored to a wide range of applications. We do this using our Omni CT syngas cooling and conditioning suit. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you