Dust Explosion Services For Health And Safety Available In Alaska
-
by Gexcon ASbased in NORWAY
Facilities handling flammable substances are exposed to hazards during storage and processing. One of the most severe hazards associated with flammable materials is the pressure caused by an explosion. Therefore, it is important to know the consequence of potential explosion hazards on your facilities when performing a risk ...
-
by DEKRAbased in USA
We offer dust explosion testing, gas & vapor flammability testing, materials characterization testing, electrostatics testing and flammability. SCE conducts an extensive range of standard hazards tests to support safety hazard analysis. We can test any solid, liquid or gas for initiation sensitivity, speed of propagation and explosiveness. We conduct field tests, such as explosives, blasting, ...
-
Manufactured by Monroe Environmental Corporationbased in USA
Monroe Environmental has treated nearly every type of industrial air stream with our variety of air cleaning equipment. Whether it contains oil mist, dry dust, particulate, soluble pollutants, acid gases, or any other harmful, corrosive, or odorous compound. We offer a broad range of stand-alone equipment as well as complete systems to effectively manage dust, mist, odors, and fumes that result ...
-
Manufactured by BlazeTech Corporationbased in USA
We provide safety assessment of a process, unit or the whole company. Examples of our past work include: Hydrogen Safety, Deflagration of shock sensitive chemicals, Hazard Assessment of Property Surrounding Pipeline Carrying Flammable Gases, Explosion of Accidentally Released Fuels, ...
-
by Gexcon ASbased in NORWAY
As an operator of a facility with potential exposure to risks such as fire and explosion, you must comply with the safety regulation that requires you to perform a risk assessment. Our consultant can provide you with various studies on risk assessment depending on your needs. We can help you improve your safety performance and fulfil your responsibility to safety ...
-
Manufactured by Duroair Technologies Inc.based in CANADA
Non-Destructive MPI and UV Testing Made Simple. Detecting metal surface flaws is no easy task, especially when you’re using magnetic particle inspections (MPIs), ultraviolet light (UV), or liquid penetrant testing to locate potentially dangerous particles not visible to the human eye. These precise, non-destructive testing procedures require a space that is large enough to work around ...
-
Manufactured by Aerodyne Environmental - A Sister Company of Abanaki Corporationbased in USA
Well-running dust collection systems require a good design. However, to design the system correctly, you need to know about your dust. Is it is explosive? How easily is it ignited? How big are the particles? And what is the particle size distribution? We offer the following tests to help you define your dust to select the best technology for your application.Particle size analysis—Provides ...
-
Manufactured by CPE Filters, Inc.based in USA
Don’t take chances by making assumptions about the properties of your dust. We take the guesswork out of how your dust’s properties affect safe and appropriate dust collection system equipment selection and design. Contact the experts at CPE Filters today regarding the following dust testing ...
-
by Fluidynbased in FRANCE
Over the years, Fluidyn has developed a unique expertise in the fields of safety and industrial risk management. Thanks to its various software tools dedicated to consequence modelling, Fluidyn offers a broad array of simulation services for the assessment of accidental scenarios in open as well as confined ...
-
by Seam Groupbased in USA
The Dust Hazard Analysis (DHA), also called a Process Hazard Analysis (PHA), is one of the most important steps you will take in order to mitigate the risk of combustible dust, fire and explosion. The dust hazard analysis is a formal, documented process that helps your company identify and address all relevant hazards, evaluate all relevant scenarios that can potentially lead to a dust fire or ...
-
based in USA
Conceptual Design - Design begins with defining the overall system concept, scope, and approach. Block diagrams express this concept. From there, we go to selecting generic types of control equipment, setting performance criteria, and planning locations. Revere applies sound engineering judgment based on many years of experience with a wide range of control equipment across a broad spectrum of ...
-
by Seam Groupbased in USA
NFPA Standards say, “The owner/operator of a facility with potentially combustible dusts shall be responsible for determining whether the materials are combustible or explosible and, if so, to characterize their properties as required to support the process hazard assessment.” Your dust is unique and must be tested in order to accurately develop a plan to reduce the risks associated ...
-
Manufactured by HOSOKAWA ALPINE Aktiengesellschaftbased in GERMANY
As well as ensuring the secure operation of your machine, Hosokawa Alpine also makes work safety a top priority and provides consulting and testing services for the health of your ...
-
Manufactured by Filtermist Systems Limitedbased in UNITED KINGDOM
We offer industrial dust extraction solutions from a variety of manufacturers to ensure the correct dust control measures are in place against all types of dust hazards. Correctly selected dust extraction systems help ensure working environments are clean and safe - protecting operators from the potentially harmful effects of dust inhalation and making sure that the premises complies with all ...
-
Manufactured by Duroair Technologies Inc.based in CANADA
Bring Safe, Clean Air to Each Metal Cutting Task. From laser and plasma cutting to grinding and sanding, working with metals can produce a toxic cloud of oil mist, fine particulate dust, and fumes that not only threaten your machinery and electronics, but endanger your most valuable assets – your employees. There’s also the risk of fines if your facility doesn’t walk the ...
-
Manufactured by Duroair Technologies Inc.based in CANADA
Additive manufacturing has the potential to help manufacturers minimize materials and energy usage, thereby reducing waste. Yet, for all the 3D excitement, there’s been very little public focus on the potential indoor air hazards of 3D printing at the industrial level, which can release volatile organic compounds (VOCs) and potentially toxic dust into the air. What if manufacturers had a ...
-
Manufactured by Duroair Technologies Inc.based in CANADA
Dust poses serious risks to both worker health and your entire facility. Grinding and blasting, cutting and sanding, and working with composites, metal, or stone produce a wide range of potentially hazardous dust that can compromise product quality and settle into every crook and crevice of your valuable machinery. Duroair can safeguard your employees and operations from dust exposure and help ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you