Dust Monitoring Equipment For Health And Safety Available In Costa Rica
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material ...
-
PremiumManufactured by ENVEAbased in FRANCE
MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions with e. g. high temperature or high dust loads. AirFlow P is the perfect measuring device for volumetric flow measurement at positions where differential pressure measurements ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based Gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sensor for continuous moisture measurement in dry bulk ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0-100%) after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you