Showing results for: Dust Monitoring (Dust Monitoring) Equipment In Europe
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 73 is a compact sensor for electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after ...
-
PremiumManufactured by ENVEAbased in FRANCE
DM 170 is a backscatter particulate measurement sensor for measuring dust ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific ...
-
Manufactured by Helmut Hund GmbHbased in GERMANY
Operation: portable. Principle of operation: Simultaneous collection of airborne particles in three size fractions according to EN 481 (inhalable, thoracic, respirable). Scattered-light photometer in each of the three stages for time-resolved online measurements. Measurement range [mg/m³] (DEHS particles, d=1 µm): 0-10. Detection limit [µg/m³] (DEHS particles, d=1 µm): ...
-
Manufactured by Helmut Hund GmbHbased in GERMANY
Measurement: imission, worklplace monitoring and monitoring of ventilation ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The dust concentration measuring device PFM 02 V is used for the continuous measurement of dust contents, especially for the emission measurement according to TI air, 13th, 17th and 27th BImSchV as well as for the dust concentration measurement in process monitorings. Parallel to the dust measurement flow and ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
Based on the principle of laser scattered light, the SMG200M can measure particle mass concentrations up to 250 mg / m³ with a particle size of 0.04 µm to 10 µm. Thanks to its robustness for mobile use, the device can withstand media temperatures of up to 500 ° C and allows precise measurements up to a dew point of 80 ° C. The measured data can be displayed both ...
-
Manufactured by Aloatecbased in FRANCE
Monitoring network: Continuous measurement of fine dust emissions in µg/m3. Environmental studies - Health studies: Fine dust measurements, weather conditions, chemical analysis ... to conduct environmental and health studies. Chemical analysis: Chemical analysis of the filters of sensors (including heavy metals concentrations). ...
-
Manufactured by BB Thermo-Technik GmbHbased in GERMANY
Through a light scattering method the highly sensitive optical sensor detects particles of smoke, dust, cigarette smoke, pollen as well as house dust pores and mite dust in ambient air starting at a particle dimension of 1 µm. The dust detector can be easily integrated into control unit devices such as ventilation ...
-
Manufactured by Helmut Hund GmbHbased in GERMANY
The TM-F is a proven and reliable monitor for respirable concentrations with easy connectivity to its industrial ...
-
Manufactured by CON.TEC Engineering srlbased in ITALY
The dust monitoring unit DustMonit is a complete system for continuous monitoring of particulate concentration in the ...
-
Manufactured by Aloatecbased in FRANCE
Best practices for dust control: Monitoring networks or environmental studies. Alarms: Real time view of dust deposition - Alarms in case of threshold crossing. Reduction of claims from neighbourhood: Dust deposition monitoring - Anticipation of possible inconvenience for people. Regulatory dust ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The VisGuard measures the scattered light intensity of a sample drawn into the instrument. Filtered purge air is fed through the flow cell, thus enveloping the sample in a protective shroud of clean air. This effectively keeps the optics clean. Installations are either in the tunnel cavity/niches (in-situ) respectively using extractive sampling away from the cavity. An optional sample heater ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The VisGuard measures the scattered light intensity of a sample drawn into the instrument. Filtered purge air is fed through the flow cell, thus enveloping the sample in a protective shroud of clean air. This effectively keeps the optics clean. Installations are either in the tunnel cavity/niches (in-situ) respectively using extractive sampling away from the cavity. An optional sample heater ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led ...
-
Manufactured by Auburn FilterSense, LLCbased in USA
Non-clogging pressure transmitters for use in particulate heavy industrial applications. The DP 20T (differential pressure) and SP 20T (static pressure) transmitters are designed for monitoring filters and duct ventilation applications in particulate laden processes. They prevent clogging that commonly occurs with gauges and ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions (PM2,5). The determination of the dust content in the FDS 15 is based on the method of scattered light ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you