waste regulation Equipment

100 Results found
Only show results in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: EHS Compliance and Regulations ×

  • Keyword: waste regulation ×

Model Series M 5600 C - AQUAprocessor

by Controlmatik ABW d.o.o.     based in Domzale, SLOVENIA

AQUAprocessor series M 5600 C is unit built with main CPU (central processor unit) and can be expanded through various other extension modules, as to the system. It is designed to control the process values on water plants, swimmingpools, waste water plants or in industry. Regulation cabinet can be configured for manual or automatic output ...

18 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

48 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

28 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

Senninge - Model PRLG Series - Inline Pressure Regulators

by Senninger Irrigation, Inc.     based in Clermont, FLORIDA (USA)

Senninger’s PRLG is ideal for installations requiring lower flows of 0.1 – 7.0 gpm (23 – 1590 L/hr). Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure. Note that with no flow through the regulator, the inlet and outlet pressures will be the same. Using the PRLG can help prevent wasteful ...

BIOGEST AG - Model Type EGAR - Electrical Flow Regulator

by BIOGEST AG     based in Taunusstein, GERMANY

With an underwater blockage the water-level difference is recalculated and the desired flow rate controlled. To avoid hydraulic overload of sewerage systems and waste water treatment facilities, storm water retention systems must be created. They are required to store large quantities of combined sewage and rainwater during storm conditions and ...

BIOGEST AG - Model Type SDS - Storm Water Tank Flow Control System

by BIOGEST AG     based in Taunusstein, GERMANY

To avoid hydraulic overloads of sewerage and waste water treatment facilities; CSO systems, and storm water detention tanks must be created. These systems will store excess flow during storm events and regulate the onward flow to treatment. The pass forward flow rate needs to be carefully controlled to avoid hydraulic overload of the downstream ...

HYDROBEND - Model GNA CSO - Bending Weir

by Gabriel Novac & Associates Inc.     based in Plattsburgh, NEW YORK (USA)

The GNA CSO HYDROBEND bending weir is designed to have the same flow capacity as a standard overflow weir operating under the same maximum design head and weir length, but is designed so that overflow will only occur when the maximum design water level is reached.

BIOGEST AG - Model Type EGAR-LC - Electrical Flow Regulator

by BIOGEST AG     based in Taunusstein, GERMANY

Storm detention systems are required in order to prevent the hydraulic overloading of sewerage networks and the waste water treatment plants at the end of the line. The task of these systems is to provide a buffer for the considerable amount of rainwater produced in wet weather conditions and to regulate its onward flow in a controlled manner. Low ...

Liquid Waste

by Kalfrisa, S.A.     based in Zaragoza, SPAIN

KL Series liquid incineration chambers have been developed to assure an efficient destruction of mixtures from different sources with very heterogeneous characteristics and also complying with the working conditions required by regulation in force.

Bags Opener

by KEY GLOBAL ITALIA srl     based in Novara, ITALY

The Bags Openers is composed of two cylinders auto allign with the possibility to regulate the speeds. The system guarantees the opening of every single sack with the relative recovery of the open sack. Loading of sacks per wheel loader or conveyor. Hoppercapacity up to approx. 30 m³. Loading depending on bulk density up to approx. ...

Model SQG CA - Hazardous Waste: Management & Minimization - Small Quantity Generators, CALIFORNIA

by Excal Visual Inc.     based in Avon, COLORADO (USA)

This training, for small quantity generators, is designed to meet regulations, develop employees’ environmental awareness and improve overall compliance. Topics include hazardous waste identification, generation and handling, satellite accumulation, on-site accumulation, shipping and transportation, waste minimization and emergency ...

Model LQG CA - Hazardous Waste: Management & Minimization - Large Quantity Generators, CALIFORNIA

by Excal Visual Inc.     based in Avon, COLORADO (USA)

This training, for large quantity generators, is designed to meet regulations, develop employees’ environmental awareness and improve overall compliance. Topics include hazardous waste identification, generation and handling, satellite accumulation, on-site accumulation, shipping and transportation, waste minimization and emergency ...

KIV - Waste to Energy System

by KIV     based in Vransko, SLOVENIA

The system's main characteristics are - smaller specific costs per unit, optimal heat efficiency, small operational and maintenance costs, with full automation of the process, great environmental acceptability, reconciliation with the regulations of the most demanding countries, such as the countries of the EU.

Model UW - Universal Waste -- Bulbs, Batts, Bugs & Barometers

by Excal Visual Inc.     based in Avon, COLORADO (USA)

Managing qualified hazardous wastes as universal wastes offers several benefits to the generator. Standards are less strict, so management becomes easier. Money is saved on disposal services. And many of these wastes can be recycled -- environmentally friendly. Effective employee training is not only required by the regulations but can help take ...

Model Medium 50/60 - Refuse Collection Vehicles

by PB Environnement España     based in Lambesc, FRANCE

5 or 6 m3 body. Adapted to short wheelbase and narrow chassis. 35mm thick aluminium alloy body, unalterable, with a double panel design which guarantees that it will always keep its shape. Smooth panels and waterproof base. Body split in 2 compartments with the possibility to have 50/50 split; 1/3 - 2/3 split; tailor made split. Compaction by a ...

Model K3 - Small Size Waste Packers

by COS.ECO. Costruzioni ecologiche s.r.l.     based in Grumo Appula(Bari), ITALY

The PICCOLO K3 solid waste compactor is an equipment designed for the collection of urban  solid and differentiated waste. The body is manufactured in full adherence to the EC Machine Directive , as prescribed by the UNI EN 1501-1 norm, presently in force, and in full respect of the Italian and the EC regulations, by means of faults free ...

Charge Regulator

by IBC SOLAR AG     based in Staffelstein, GERMANY

The charge regulator is the manager of battery-powered systems. It controls the electrical flow between the solar module, the consumer and the battery. The charge regulator protects the battery from overcharge and depletion, which maximises battery life. Additionally, it provides operating data and fulfils very important control and safety ...

NERC

by Argent Consulting Services, Inc.     based in Houston, TEXAS (USA)

Companies are facing an increase in complexity related to NERC regulatory compliance and with that comes an increase in costs. Companies are being exposed to changes in NERC regulations on a daily basis and it is critical that they have an effective compliance management system in place that can capture these changes and alert proper personnel.

Hospital Waste Cart Tipper

by George K. Moss Co., Inc.     based in Birmingham, ALABAMA (USA)

Safety is always a major concern when dealing with hospital waste. The cart tipper with spill chute is designed to load red bag infectious waste from the hospital floor carts directly into the autoclave cart hands free. This significantly reduces the handling of the regulated waste.

Need help finding the right suppliers?

Let the XPRTs do the work for you